Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

12-Volt Conversion Kits
Master Parts List
[Show Pictures]
(ALL) Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Part No: 105299)$15.26

(FE) 12 Volt Conversion Kit - 12 volt conversion for TO30 ONLY. (Includes alternator with built-in regulator, 12 volt resistor, wiring harness, brackets and instructions). (Part No: 107098)$115.00

(FE) 12 Volt Conversion Kit - 12 Volt Conversion For TO20 and TE20 both with original Z120C500 block and without optional tachometer drive. (Includes alternator with built-in regulator, 12 volt resistor, wiring harness, brackets and instructions)....PLEASE NOTE - certain late production replacement Z-120 blocks were cast from Z-129 patterns. The result is two untapped bosses on the block behind the generator which prevent the alternator from mounting and this kit will not work. (Part No: 116859)$184.57

(FE) Alternator Base Bracket - Alternator Base bracket used in 12 volt conversion kit. Mounts to block with 3 1 2 inches center-to-center mounting bolt holes, for model TO30. Hardware kit available as part number HDW9302. (Part No: 164216)$5.76

(FE) Alternator Base Bracket - Base bracket used in 12 volt conversion kit. For model TO20. Hardware kit available as part number HDW9302. (Part No: 164221)$10.00

(FE) Alternator Hardware Kit - Hardware for brackets in 12 volt conversion kits. For tractor models TO20, TO30. (Part No: 178123)$3.70

(FE) Alternator Top Bracket - Adjustable top bracket used in 12 volt conversion kit. For model TO30. Hardware kit available as part number HDW9302. (Part No: 164217)$14.00

(FE) Alternator Top Bracket - Adjustable top bracket used in 12 volt conversion kit. For model TO20. Hardware kit available as part number HDW9302. (Part No: 164222)$17.60

(FE) Wiring Harness, 12 Volt Conversion Kit - Wiring harness for 12 volt conversion kits. For tractor models TO20, TO30. (Part No: 164236)$14.76

(FORD) 12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not require a 12 volt coil. Comes with everything needed to convert to a 12 volt starting system except for a battery. (Part No: 103141)$117.00

(FORD) 12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Part No: 103142)$119.00

(FORD) 12 Volt Conversion Kit - For tractor models 2000 3 Cylinder, 3000 3 Cylinder, 4000 3 Cylinder, 5000, 7000. 1965 and up, Gas and Diesel. Converts 6-volt systems to 12-volt and updates older 12 volt tractors- Replaces Lucas Generator. Includes new unicharge alternator (12 Volt, 63 Amp, Internally Regulated) with pulley and internal self exciting regulator, brackets, wiring harness and instructions. Includes Tach Drive. Replaces 87406904R. (Part No: 150227)$200.00

(FORD) 12 Volt Conversion Kit, Front Mount Distributor - 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. If you would like avoid the possibility of have to make that minor modification, use 8NE10302-F top bracket (not included). Will not work if you have a magneto. (Part No: 103139)$170.00

(FORD) 12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts Nuts Instructions. (Part No: 103140)$182.82

(FORD) Alternator - This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000, 600, 700, 800, 900. Also used with many other models for 12 volt conversion. Replaces 5564-10305SE. (Part No: 111377)$78.99

(FORD) Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5 8 inches wide. The diameter varies from our different suppliers. This measures about 2 5 8 inches outside diameter, give or take about a 1 4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: 172594)$18.76

(FORD) Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Part No: 105710)$3.16

(FORD) Wiring Harness 12 Volt - Wiring Harness for 2N, early 8N, and 9N front mount distributors tractors that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Part No: 164233)$26.26

(FORD) Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Part No: 164238)$20.50

(IH) 12 Volt Conversion Kit - For M, Super M. Kit includes alternator with built-in regulator, Pulley, 12 volt resistor, wiring harness, brackets and instructions. Will not work if you have a magneto. THIS KIT USES A LARGER ALTERNATOR THAN THE IHCALTH KIT. IT WILL NOT FIT UNDER HOOD WITHOUT CUTTING HOOD. (Part No: 107099)$130.90

(IH) Alternator - This alternator has a built in regulator. This is the alternator used in our 12 volt conversion kit for the model H. 40 Amp. It will fit under hood without hood modifications. This is NOT a single wire alternator. (Part No: 117421)$118.00

(IH) Alternator - For Cub and other various models. This is the smallest alternator of those listed and will fit under the hood of most applications and is used in the 12 volt conversion kit for the Cub. Uses a 1 2 pulley. A 5 8 belt will ride high on the pulley and work fine. (Part No: 113318)$105.00

(IH) Wiring Harness - 12 Volt - Used when tractor has been converted to 12 volts with our 12 volt conversion kit. For tractor models H, Super H, M, Super M (Part No: 164232)$21.50

(MF) 12 Volt Conversion Kit - 12 volt conversion for TO30 ONLY. (Includes alternator with built-in regulator, 12 volt resistor, wiring harness, brackets and instructions). (Part No: 107098)$115.00

(MF) 12 Volt Conversion Kit - 12 Volt Conversion For TO20 and TE20 both with original Z120C500 block and without optional tachometer drive. (Includes alternator with built-in regulator, 12 volt resistor, wiring harness, brackets and instructions)....PLEASE NOTE - certain late production replacement Z-120 blocks were cast from Z-129 patterns. The result is two untapped bosses on the block behind the generator which prevent the alternator from mounting and this kit will not work. (Part No: 116859)$184.57

(MF) Alternator Base Bracket - Base bracket used in 12 volt conversion kit. For model TO20. Hardware kit available as part number HDW9302. (Part No: 164221)$10.00

(MF) Alternator Base Bracket - Alternator Base bracket used in 12 volt conversion kit. Mounts to block with 3 1 2 inches center-to-center mounting bolt holes, for model TO30. Hardware kit available as part number HDW9302. (Part No: 164216)$5.76

(MF) Alternator Hardware Kit - Hardware for brackets in 12 volt conversion kits. For tractor models TO20, TO30. (Part No: 178123)$3.70

(MF) Alternator Top Bracket - Adjustable top bracket used in 12 volt conversion kit. For model TO20. Hardware kit available as part number HDW9302. (Part No: 164222)$17.60

(MF) Alternator Top Bracket - Adjustable top bracket used in 12 volt conversion kit. For model TO30. Hardware kit available as part number HDW9302. (Part No: 164217)$14.00

(MF) Wiring Harness, 12 Volt Conversion Kit - Wiring harness for 12 volt conversion kits. For tractor models TO20, TO30. (Part No: 164236)$14.76






PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy