(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Allis Chalmers
[ Show All Pictures ]
 
Brakes
Brake Adjusting Screw - Zinc plated, 7 16" -20 NF x 3" long. For models B, C, CA. (Part No: 70213375)$19.95 [Show Picture]

Brake Band - Sold Individually, 4 required per tractor. For models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 SN# less than 4000), (D17 SN# 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Part No: 70277379)$38.16 [Show Picture]

Brake Band Assembly - For models B, C, CA, IB. Replaces 70216775. (Part No: 70276965)$51.98 [Show Picture]

Brake Band Assembly - For models 5045, 5050. (Part No: 72094484)$78.72

Brake Drum - For models B, IB, C, CA 1 used with final drive clutch. Dimensions 1.375" Bore, 2.880" Wide, 5.969" Diameter (Part No: 70205527)$59.89

Brake Drum - For models D-10, D-12, D-14, D-15. Dimensions: 1.375 Bore, 4.250 Wide, 7.548 Diameter (Part No: 70239542)$68.46

Brake Drum - 1.500" I.D, keyway, 2.860" Wide, 7.875" O.D. For models WD, WD45, WD45D, D17. (Part No: 70232585)$82.90 [Show Picture]

Brake Friction Plate - For models 170, 175, 180, 185, D17. (Part No: 70237215)$128.32 [Show Picture]

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Prior to SN# 21699. For 190, 190XT, D19, F, F2, L. 70252562, 70277200 (Part No: 70235628)$28.40 [Show Picture]

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Non-Asbestos. SN# 42001 & up, D17 Series IV. For models 170, 175, 180, 185, D17. (Part No: 70237421)$32.21 [Show Picture]

Brake Lining - Set of 2 brake shoe linings with rivets for one wheel. For models IB, B, C, CA, R. (Part No: 70276944)$17.00 [Show Picture]

Brake Lining - For models D-10, D-12, D-14, D-15. NOTE: QTY of 1 includes 2 linings & rivets. Enough to service 1 brake. Replaces OEM #70230874 (Part No: 70277309)$25.81 [Show Picture]

Brake Pivot Pin - .750" dia. x 1.625" long. For models B, C, CA. (Part No: 70207221)$10.65 [Show Picture]

Brake Plate Assembly, with Lining - 25 spline, 6.50" dia. For models 175, 180, 185. (Part No: 70277326)$70.78 [Show Picture]

Brake Plate Assembly, with Lining - 20 spline, 6.50" dia. For models 170, (D17 SN# 42001 and up). Also Replaces 70237208. (Part No: 70277327)$134.38 [Show Picture]

Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1 4" throat, 1 8" dia. rivet punch. (Part No: RIVET_TOOL)$35.25 [Show Picture]

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3 8" deep throat x 2-1 8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)$89.00 [Show Picture]

Brake Rod Return Spring - For models WD, WD45. (Part No: 70222670)$19.00

Brake Shoe Anchor Pin - Overall length of 6 5 8 inches and diameter of 3 4 inch. Verify measurements. For models D17 series III, WD, WD45. (Part No: 70232801)$19.23 [Show Picture]

Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after Serial number 42000, D19, D21. (Part No: BLKAD17)$28.90 [Show Picture]

Brake Shoe Linings with Rivets - For models D-17 with SN# up to 42000, WD, WD45, WD45D. This is a set of 2 linnings with rivets for one wheel. (Part No: 70276950)$17.00

Brake Shoe Return Spring - Spring is 3 3 16 inches overall length and diameter of 3 4 inch. Verify measurements. For models (D17 up to SN# 42000), WD, WD45. (Part No: 222501)$18.00 [Show Picture]

Brake Shoe Return Spring - For models B, C, CA. (Part No: 70207320)$18.00

Brake Shoe Return Spring - For model G. (Part No: 800403)$23.50

Brake Shoe Return Spring - For models D10, D12, D14, D15. (Part No: 70228253)$19.00

Disc Bearing - Cylindrical ball bearing with triple seal on each side and square bore. For models K, KT, WKT. (Part No: W211PP5)$67.25

Hand Brake Knob - Plastic knob, 3 8" fine thread. For models B, IB, C. (Part No: R4572)$7.00 [Show Picture]

 
Clutch
CLUTCH, PRESSURE PLATE - Pressure Plate (7 1 4 inch) Diaphram Type. For Deutz Allis models 5015, 5215. (Part No: S.72822_)$49.14 [Show Picture]

Cluch Plate, 11 - 4 button, spring loaded, 10 spline, 1.250" spline dia.. For models 170, 175, (D17 SN# 75001 and up). (Part No: 70247859)$103.90 [Show Picture]

Clutch - Sanden Syle - With 5.22 inch pulley, double pulley. For models 6670, 6690, 7600, 7630, 8630, 9130, 9150, 9630, 9650, 9670, 9690. (Part No: 72162176)$105.58

Clutch Assembly - 13 Inch - This Complete Assembly Includes The Pressure Plate, (2) Clutch Discs & Center Plate. Replaces 30-3085589, 72163225. For models 9170, 9190, 9435, 9455 (Part No: 72508717)$1104.10

Clutch Bearing - Clutch release bearing. For models 170, 175, 210, 220, 7000, D17, D21. (Part No: 70260803)$26.96 [Show Picture]

Clutch Disc - 10 dia., 1-1 4 hub, 10 spline. For models WC, WD, WD45, WF. (Part No: 70226764)$92.60 [Show Picture]

Clutch Disc - Remanufactured 12 diameter, 1-1 4 hub, 10 spline. Tractors: 180, 185, 190. (Part No: 70247071)$144.90 [Show Picture]

Clutch Disc - Remanufactured 12 diameter, 1-5 16 hub, 20 spline. For models 7010, 7020, 7040, 7045, 7060, 8010, 8030, 8050, 8070. (Part No: 70268718)$116.09 [Show Picture]

Clutch Disc - TRACTOR: D17 (up to SN 75000) (Part No: 70232241)$91.59 [Show Picture]

Clutch Disc 13 Inch - 6 Button, Spring Loaded. 1 3 4 inch hub, 27 splines. For model s:9170, 9190, 9435, 9455. (Part No: 72161807)$261.11

Clutch Disc, 9 Inch - Has 1-1 8 hub, 10 spline. For models B, C, CA, (D10 up to SN# 3500), (D12 up to SN# 3000), D14, D15. (Part No: 70232239)$119.00 [Show Picture]

Clutch Disc, Organic - 8-1 2, Remanufactured, spring loaded, .9375 spline dia., 13 spline. For models 5020, 5030. (Part No: 3435019M93)$71.33

Clutch Disc, Rigid - Has 1-1 8 hub, 10 spline. For models (D10 up to SN# 3501), (D12 up to SN# 3001), D14. (Part No: 70232239-R)$79.99 [Show Picture]

Clutch Disc, Solid - 6.50, 10 spline, .9375 spline dia. For model G. (Part No: 70800662)$37.19 [Show Picture]

Clutch Disk - 11 Inch - 14 Spline, 1.563 inch hub, organic, solid. For models 5040, 5045, 5050, 6060. (Part No: 72093924)$64.58

Clutch Disk, 8.5 Inch - SOLID, spline dia. 1.125, 10 spline. For models B, B125, B15, C, CA, IB. (Part No: 70226729)$61.79

Clutch Disk, 8.5 Inch - New Spring Loaded Disc is 10 spline with 1.125 inch diameter. (Part No: 70226730)$90.46

Clutch Finger Kit - For Main Clutch (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces 72093951, 72093950 (Part No: S.62177)$65.41 [Show Picture]

Clutch Inspection Cover Plate - For model G. (Part No: 800388)$30.15

Clutch Inspection Cover Plate - With spring steel clips, powder coated. For models D14, D15. (Part No: 70227610)$14.95 [Show Picture]

Clutch Inspection Plate - Fits: B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Part No: 208465)$19.00 [Show Picture]

Clutch Kit - Kit contains remanufactured pressure plate assembly, 8-1 2", remanufactured disc, 10 spline, 1-1 8" hub, woven disc; new release bearings. For Tractors B, C, CA. (Part No: 70226262K)$276.68 [Show Picture]

Clutch Kit - Tru-Power ” Clutch Kit. Kit contains remanufactured pressure plate assembly, 11”, remanufactured disc, 10 spline, 1-1 4” hub, woven disc; new release bearings and pilot bearing.. For Tractors D17 to SN# 75001. NO Core (Part No: 70229344K)$275.56 [Show Picture]

Clutch Kit - 'Tru-Power ' Clutch Kit. Kit contains: Remanufactured pressure plate assembly, 11", 2" hub, 30 spline, Remanufactured disc, 10 spline, 1-1 4" hub, woven disc, new release bearing and pilot bearing. For Tractors D17 Series IV SN# 75001 & up. NO CORE CHARGE. (Part No: 70242572NC)$434.66 [Show Picture]

Clutch Kit - Tru-Power ” Clutch Kit. Kit contains remanufactured pressure plate assembly, 11”, remanufactured disc, 10 spline, 1-1 4” hub, woven disc; new release bearing and pilot bearing.. For Tractors D19. There is also a $25.00 re-fundable core charge. (Part No: 70241253K)$250.51 [Show Picture]

Clutch Kit - Tru-Power ” Clutch Kit. Kit contains remanufactured pressure plate assembly, 12”, remanufactured disc, HD, 10 spline, 6 Pad, 1-1 4” hub, new release bearing and pilot bearing.. For Tractors 180, 185, 190. Refundable $20.00 Core Charge will be added to your order. (Part No: 70280462K)$384.75 [Show Picture]

Clutch Kit - 'Tru-Power ' Clutch Kit. Kit contains remanufactured pressure plate assembly, 12”, remanufactured disc, HD, 10 spline, 6 Pad, 1-1 4” hub, new release bearing and pilot bearing.. For Tractors 190XT, 200. NO CORE CHARGE. (Part No: 70255689NC)$446.04 [Show Picture]

Clutch Seal, Rear Engine - For models WD, WD45. (Part No: 70222540)$18.75

Clutch, 2 Groove - For models 9435, 9455, (9630 SN# 921001 and up), 9635, (9650 SN# 941001 and up), 9655, (9670 SN# 961001 and up), 9675, (9690 SN# 981001 and up), 9695, 9815. (Part No: 72507683)$129.25 [Show Picture]

Clutch, Adjusting Piston - For models 180, 185, 190, 190XT III, 200 SN# 9070 and up. (Part No: 70257507)$79.96 [Show Picture]

Clutch, Woven - Remanufactured 11 inch diameter, 1-1 4 inch hub, 10 spline. For models D17, D19, 170, 175. (Part No: 70241255)$122.93 [Show Picture]

Hand Clutch Lever - For model CA. Includes bolt and knob Replaces 225582 lever, 912195 bolt, 206456 knob. (Part No: 206456)$88.50 [Show Picture]

PTO Clutch Finger Kit - PTO 90 degree fingers. (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces 72093951, 72093950 (Part No: S.62178)$65.41 [Show Picture]

Pilot Bearing - Clutch pilot bearing. For models RC, WC, WD, WD45. (Part No: 70205756)$27.78 [Show Picture]

Pilot Bearing - Clutch pilot bearing. For models 170, 180, 190, D17, D19, D21, WD45. (Part No: 70527813)$11.84 [Show Picture]

Power Director Clutch Plate - For models D19, 170, 175. (Part No: 70230015)$129.63

Pressure Plate - 10" Rockford style. For models WC, WD, WD45, WF. (Part No: 70230506)$148.95

Pressure Plate - 9" dia. For models D10 and D12 SN# 3502 and up, D14, D15, (H3 with 149 engine), HD3. (Part No: 70247745)$157.16 [Show Picture]

Pressure Plate - 6.50". For model G. (Part No: 70800023)$114.13 [Show Picture]

Pressure Plate - 13 Inch, 3 Lever. Replaces 7251309. For models 9170, 9190, 9435, 9455. (Part No: 72163216)$699.99

Pressure Plate, 11 - 30 splines, 1.9875" spline dia., 1.437" flywheel step. For models 170, 175, (D17 SN# 75001 and up). (Part No: 70242572)$179.90 [Show Picture]

Pressure Plate, 11 - 6 lever, cast iron, ind. PTO, comes with rigid metallic clutch disc. For models (5040 8 & 12 speed), 5045, 5050, 6040, 6060, 6070. (Part No: 72094463)$596.64

Pressure Plate, 11 inch without Hub - For models 170, 175, D19. (Part No: 70241253)$198.88

Pressure Plate, 8.5 Inch - New Pressure Plate. For models B, B125, B15, C, CA, IB. (Part No: 70226262)$167.50 [Show Picture]

Pressure Plate, 9 Inch - Rockford style. For models B, C, CA, D10 SN# less than 3501, D12 SN# less than 3001, WF. (Part No: 70228926)$138.94 [Show Picture]

Pressure Plate, New - 8-1 2" Diaphram style, 18 fingers. For model 5020 and 5030. (Part No: 72098568)$124.63

Release Bearing - For tractors: B, 1B, WC, WF, WD, WD45, WD45D, D10 (SN# 3501 & up), D12 (SN# 3001 & up), D17 (prior to SN# 75000), D19. (Part No: 70204829)$31.71 [Show Picture]

Release Bearing, Clutch - For models 5020, 5030. (Part No: N3764)$39.90

Release bearing - For models 180, 185, 190, 190XT, 200, C, CA, D10(SN# 3501 & below), D12(SN# 3001 & below), D14, D15, D17(SN# 75000 & below), D19, H3 (with 149 engine). (Part No: 70235079)$22.52 [Show Picture]

 
Cooling System
Air Conditioning High Pressure Switch - For models 9130, 9150, 9170, 9190, 9630, 9650, 9655, 9670, 9690. (Part No: 72161644)$54.49

Air Conditioning Receiver Drier - For models 9130, 9150, 9170, 9190, 9630, 9650, 9670, 9690, 8560, 8570, 8590, 9720. (Part No: 72161835)$61.55

Air Conditioning Switch Low Pressure - Drier mtg. 2 spade. For models 8785, 9130, 9150, 9170, 9190, 9435, 9455, 9630, 9650. (Part No: 72162165)$14.74

Air Conditioning Thermostatic Switch - For models 9130, 9150, 9170, 9190, 9435, 9455, 9630, 9635, 9650, 9655, 9670, 9675, 9690, 9695. (Part No: 72162641)$27.84

Belt - Tractor fan belt, diesel. For 170, A, A2, C, D19, WD45. 1 2" x 48-5 8" long. (Part No: 378113R2)$19.82 [Show Picture]

Blower Motor - 4 Wire, 12V 3 8 x 4 1 4 shaft, 3 speed, Body Length 4 1 8, Body Diameter 3 1 2. For models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 9130, 9150, 9170, 9190, 9435, 9455, 9630, 8635, 9650, 9655, 9670, 9675, 9690, 9695, 9815. (Part No: 72162089)$84.72

Condenser - Measures 22 inches tall, 12.75 inches wide. Replaces OEM numbers 303208923, 72160594. For models 9130, 9150, 9170, 9190, 9630, 9650, 9670, 9690 (Part No: 72503630)$235.36

Engine Block Heater - Like original. For models 180, 185, 190, 190XT200, 7000, 7010, 7020, 8010. (Part No: 70256705)$57.90

Engine Heater - For models WC, WD, WD45 all Not For Use on Diesel Engine without By-Pass in Water Pump. Heater fits in Lower Radiator Hose. 600 Watt eases starting on cold mornings. (Part No: 5B15)$50.48 [Show Picture]

Evaporator - Measures 6.25 x 21.87 inches. For models 9435, 9455, 9635, 9655, 9675, 9696, 9815. (Part No: 72162194)$243.94

Fan - 4 Blade, 15 1 2 inch diameter. 1 1 8 inch pilot hole. 3 Bolt mount on 1 5 8 centers. . For models 5040, 5045, 5050. (Part No: 72089485)$34.86

Fan Belt - Tractor fan belt. For W, WC, WD, WD45, WF (Part No: 70209824)$10.80 [Show Picture]

Fan Belt - Tractor fan belt. For models D17 with gas engine. (Part No: 70229211)$14.76 [Show Picture]

Fan Belt - For models 170, 175 both with gas engines. (Part No: 70248316)$9.58

Fan Belt - For models B, IB, C, CA, D10 UP TO SN# 3501, D12 UP TO SN# 3001, AND D14. ALL WITH GENERATORS. ALSO REPLACES 209656 (Part No: 70209656)$12.85 [Show Picture]

Fan Belt - Also replaces 72090561. For models 5040, 5045, 5050. (Part No: 72091544)$10.80

Fan Belt - For model 6140. (Part No: 72099473)$14.62

Fan Belts - Pair - Tractor fan belts, diesel matched pair prior to 19938, except 117087 thru 117104. For model D17. (Part No: 70229559)$37.50

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Part No: 70235753)$29.95 [Show Picture]

Fan Blade, 5 Blade - 18-1 2" dia., 1-1 2" pilot hole, mounting holes on 2" centers. For models 180, 185, 190, 190XT. (Part No: 70255751)$117.07

Heater - Engine block heater. 36mm Core Plug. For models 5040, 5045, 5050. (Part No: S.70746)$36.52

Lower Radiator Hose - For 160. 1.5 inch inside diameter on one end, and 1.375 inside diameter on other. (Part No: 72073294)$18.23 [Show Picture]

Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3 4 inches x 3-3 4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)$56.70

Oil Cooler - Core size 6" high, 19.75" wide. For models (185 up to SN# 14553), 190, 190XT, 200, 210, 220. (Part No: 70272180)$297.57

Pulley, Water Pump - For models (D17 series III with diesel engine), D19. (Part No: 74513381)$43.79 [Show Picture]

Pulley, Water Pump - Double groove. For models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Part No: 74037185)$81.04 [Show Picture]

Radiator - Core size 18.625" wide, 18.9375" high, 4 rows of tubes 8 fins per inch. For model WD45 diesel. (Part No: 70227166)$604.99 [Show Picture]

Radiator - Core size 24.25" high, 26.50" wide, 3 rows of tubes, 10 fins per inch. For model 7000. (Part No: 70260432)$654.21 [Show Picture]

Radiator - Fits 190, 190XT, 190XT III. Dim Info: Core Size: 23.00" Wide 18.25" High 5 Rows of Tubes 7 Fins per Inch. (Part No: 70250729)$701.87 [Show Picture]

Radiator - Radiator for AC 7030, 7040, 7045, 7050, 7060. This radiator uses Cap #R1811 (Part No: R4940)$1319.58 [Show Picture]

Radiator - For model WC after SN# 74330, WD, WD45 ALL GAS LP; W226 Gas Power Unit. Radiator. Core size: 18.0" wide, 18.187" high, 3 rows of tubes, 7 fins per inch. Also replaces 70228587. Uses R0934 temperature gauge, available seperately. (Part No: 70228585)$299.00 [Show Picture]

Radiator - Also replaces 72093205. For models 5040, 5045, 5050. (Part No: 72090517)$393.91

Radiator - For model D17 Gas or LP gas. (Part No: 70229702)$578.63 [Show Picture]

Radiator - Radiator with cowling. For model D14. This Radiator uses cap #R1811. Replaces OEM # 70227888. (Part No: 70228567)$407.70 [Show Picture]

Radiator - Pressurized. For models B, C, CA, D10 and D12 - VERIFY OEM PART NUMBER. Core is 15 inches wide x 14.2 inches high. Also replaces 70233232, 7023313 and 70233290. (Part No: 70214337)$234.37 [Show Picture]

Radiator - For model D15 Gas after SN# 9001. (Part No: 70243967)$556.20

Radiator - For models F2, F3 Gas (From S#39201). OEM# 71302772. (Part No: R2806)$982.80 [Show Picture]

Radiator - For models F2, F3 Diesel (S#36201 to #51000). (Part No: R2807)$982.80 [Show Picture]

Radiator - For models K (S#8201-#24200), K2 Gas (S#24201-#27000). (Part No: R2808)$856.80 [Show Picture]

Radiator - For models K2 Diesel (S#24201-#27200). (Part No: R2809)$1039.50

Radiator Cap - 7 lb. For models 5040, 5045, 5050, 6060, 6070, 6080, 8010, 8030, 8050, 8070. Replaces 72089869, 72090620. (Part No: 70263761)$7.14 [Show Picture]

Radiator Cap - Original style with "WATER" imprint, non-pressurized system. For models (B from SN# 61221), (C from SN# 18581), CA, RC, G, (WC, WF unstyled), WD, WD45. Replaces 70228545, 213485. (Part No: 228545)$7.64 [Show Picture]

Radiator Cap, Pressurized - For models Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. (Part No: 70254891)$8.95 [Show Picture]

Radiator Cap, With Lever - Original style. For models B, C, CA, G, WC, RC, WF, WD, WD45. DOES NOT FIT our radiator 70214337. Only fits original UNPRESSURIZED system radiator. Also used as a gas cap for some applications. (Part No: 70207244)$19.95 [Show Picture]

Radiator Hose Lower - Hose, lower radiator. For 180, 185, 190, 190XT (Part No: 70248233)$14.88 [Show Picture]

Radiator Hose Upper - Hose, upper radiator. For 180, 185, 190, 190XT (Part No: 70243014)$15.52 [Show Picture]

Radiator Hose, Lower - 1.532" I.D.. For models WC, WD, WD45, WF. (Part No: 70203090)$10.28 [Show Picture]

Radiator Hose, Lower - 1.5" I.D.. For model WD45. (Part No: 70227176)$8.90 [Show Picture]

Radiator Hose, Lower - 1.437" I.D.. For models 5040, 5045, 5050. (Part No: 72089314)$6.06 [Show Picture]

Radiator Hose, Lower - 1.50" I.D.. For model D17 with gas engine. (Part No: 70229209)$9.42 [Show Picture]

Radiator Hose, Lower - A = 1.50", B = 1.750". For model s:(D17 diesel SN# 38964 and up), (D19 gas). (Part No: 70235356)$12.82 [Show Picture]

Radiator Hose, Lower - A = 1.562", B = 1.812". For model D19 diesel. (Part No: 70236836)$16.53 [Show Picture]

Radiator Hose, Lower - A = 1.690", B = 2.125". For models (190 SN# up to 14449), 190XT, (190XT III SN# up to 14450). (Part No: 70243015)$11.32 [Show Picture]

Radiator Hose, Lower - A = 2.125", B = 1.75". For model 200. (Part No: 70256374)$10.83 [Show Picture]

Radiator Hose, Lower - A= 1.080" I.D.. For model 5015. (Part No: 72100734)$15.80 [Show Picture]

Radiator Hose, Lower - 1.250" I.D.. For model 5030. (Part No: 72098630)$15.23 [Show Picture]

Radiator Hose, Lower - 1.080" I.D.. For model 5220 hydrostat. (Part No: 72104395)$18.80 [Show Picture]

Radiator Hose, Lower - 1.375" I.D.. For model 5230 synchro. (Part No: 72104242)$27.11 [Show Picture]

Radiator Hose, Lower - 2.312" I.D.. For models 6060, 6070, 6080. (Part No: 70263407)$18.58 [Show Picture]

Radiator Hose, Lower - A = 2.125", B = 2.375". For model 7000. (Part No: 70260326)$23.91 [Show Picture]

Radiator Hose, Lower - A = 2.250", B = 2.375". For models 7030, 7040, 7045, 7050, 7060. (Part No: 70267817)$10.99 [Show Picture]

Radiator Hose, Lower - A = 2.250", B = 2.375". For models 7080, (8050 late), 8070. (Part No: 70268974)$13.43 [Show Picture]

Radiator Hose, Lower - A = 2.250", B = 2.400". For model 7580. (Part No: 70258541)$13.27 [Show Picture]

Radiator Hose, Lower - A = 2.250", B = 2.625". For model 8010. (Part No: 70264171)$28.42 [Show Picture]

Radiator Hose, Lower - A = 2.250", B = 2.375". For models 8030, (8050 early). (Part No: 70273688)$10.57 [Show Picture]

Radiator Hose, Lower - I.D. 1.250" For models B, C, CA, D10, D12, D14. (Part No: 70207173)$4.39 [Show Picture]

Radiator Hose, Lower, Gas - 1.50" I.D.. For models (170, 175 with gas engines). (Part No: 70249760)$16.92 [Show Picture]

Radiator Hose, Lower, Gas - 1.250" I.D.. For model D15 with gas engine. (Part No: 70233431)$10.95 [Show Picture]

Radiator Hose, Upper - 1.812" I.D.. For models WD45, (D17 diesel SN# up to 38963). (Part No: 70226893)$5.20 [Show Picture]

Radiator Hose, Upper - 1.5" I.D.. For models (D17 diesel up to SN# 38963), WC, WD, WD45, WF. (Part No: 70233153)$5.78 [Show Picture]

Radiator Hose, Upper - 1.50" I.D.. For model D15 diesel. (Part No: 70203429)$4.88 [Show Picture]

Radiator Hose, Upper - 1.203" I.D.. For models D10, D12. (Part No: 70231965)$12.79 [Show Picture]

Radiator Hose, Upper - 1.250" I.D.. For model D14. (Part No: 70227889)$7.95 [Show Picture]

Radiator Hose, Upper - 1.50" I.D.. For model D17 with gas engine. (Part No: 70229636)$9.13 [Show Picture]

Radiator Hose, Upper - 1.750" I.D.. For models (D17 diesel SN# 38964 and up), (D19 diesel with 4-15 16" filler neck). (Part No: 70235361)$12.52 [Show Picture]

Radiator Hose, Upper - 1.750" I.D.. For model D19 with gas engine. (Part No: 70236594)$11.96 [Show Picture]

Radiator Hose, Upper - A = 1.750", B = 2.125". For model 200. (Part No: 70256331)$8.54 [Show Picture]

Radiator Hose, Upper - 1.080" I.D.. For model 5015. (Part No: 72100735)$14.36 [Show Picture]

Radiator Hose, Upper - 1.375" I.D.. For model 5030. (Part No: 72098549)$9.91 [Show Picture]

Radiator Hose, Upper - 1.750" I.D.. For models 5040, 5045, 5050. (Part No: 72089692)$16.97 [Show Picture]

Radiator Hose, Upper - A = 1.312", B = 1.080". For model 5220 hydrostat. (Part No: 72104365)$21.79 [Show Picture]

Radiator Hose, Upper - A = 1.250", B = 1.062". For model 5220 Synchro. (Part No: 72102630)$10.65 [Show Picture]

Radiator Hose, Upper - 1.375" I.D.. For model 5230 synchro. (Part No: 72102678)$23.92 [Show Picture]

Radiator Hose, Upper - 2.125" I.D.. For models 6060, 6070, 6080. (Part No: 70263406)$14.61 [Show Picture]

Radiator Hose, Upper - A = 1.437", B = 1.340". For model 6140. (Part No: 72099478)$19.51 [Show Picture]

Radiator Hose, Upper - 2.125" I.D.. For model 7000. (Part No: 70260327)$21.78 [Show Picture]

Radiator Hose, Upper - A = 2.50", B = 2.25". For models 7010, 7020. (Part No: 70262102)$18.16 [Show Picture]

Radiator Hose, Upper - A = 2.250", B = 2.375". For models 7030, 7040, 7045, 7050, 7060, 7080, 7580. (Part No: 70267816)$23.30 [Show Picture]

Radiator Hose, Upper - A = 2.312", B = 2.400". For model 8010. (Part No: 70276094)$21.72 [Show Picture]

Radiator Hose, Upper - A = 2.312", B = 2.375". For models 8030, (8050 early), 8070. (Part No: 70276095)$23.82 [Show Picture]

Radiator Hose, Upper, Diesel - 1.875" I.D.. For models (170, 175 with diesel engine). (Part No: 70249755)$7.14 [Show Picture]

Radiator Hose, Upper, Gas - 1.50" I.D.. For models (170, 175 with gas engine). (Part No: 70249759)$23.38 [Show Picture]

Radiator Hose, Upper, Gas - 1.250" I.D.. For model D15 with gas engine. (Part No: 70233430)$11.31 [Show Picture]

Thermostat - 180 degree. For models 170, 175, B, C, CA, D14, D17, WD, WD45. All with gas engines. (Part No: 70229927)$16.12 [Show Picture]

Thermostat - For models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 SN# 119938 and up), (D19 diesel), D21. (Part No: 74025103)$7.32 [Show Picture]

Thermostat - For models 5040, 5045, 5050. (Part No: 72090518)$18.86

Thermostat Gasket - For models 170, 175. Replaces 36834147, 745106V1. (Part No: 70254490)$8.67

Thermostat Housing - Three bolt flange. For models 5040, 5045, 5050. Comes with gasket. (Part No: 72089651)$11.66

Water Pump - Water pump for gas or diesel engines, with hub and inlet & outlet gaskets, (o-ring for early models not included). This pump is for tractors with a steel line that screws into pump housing with 7 8" 18 Thread. For 180, 185, 190, 190XT, D21. (Part No: 74007554)$135.23 [Show Picture]

Water Pump - Water pump for AC 6140. MF 1040, 1045. All with 3 cylinder Toyosha Engine. Replaces: 2099891 (Part No: 72099891)$105.98

Water Pump - For models 5215, 5220. Water Pump without pulley also replaces 72103891. (Part No: 3284086M92)$154.62 [Show Picture]

Water Pump - Water Pump Less Hub and Pulley. Fits water pumps with casting # L126627. For models A, D19 (Diesel & late gas). (Part No: 74517363)$123.59

Water Pump - This pump is for tractors that use a rubber hose to pump. For tractors that use a steel line that screws into pump housing.. use part # 74007554. For models 200, 210, 220, 7000. Replaces 4035757N, 71370786, 4029129. (Part No: 74008840)$131.25

Water Pump - For models 6060, 6070, 6080. (Part No: 74009278)$170.95

Water Pump - For models 7010, 7020, 8010. Replaces casting numbers 4007683, 4008611-02, 4062321. (Part No: 74062321)$129.32

Water Pump - 4.938" filler neck. For models (D17 series III diesel), (D19 gas and LP). Replaces 4516959. (Part No: 74517362)$129.45 [Show Picture]

Water Pump - For model 5015. Does not include back plate. (Part No: 72101382)$171.37 [Show Picture]

Water Pump - Less pulley. Comes with gasket. For models 5040, 5045, 5050. Replaces casting # 2090472, 4784454, 4603862. (Part No: 72089683)$93.32 [Show Picture]

Water Pump - For models 5020 or 5030 with P126 or S148 engines. Replaces OEM #2098575. (Part No: 72098575)$102.22 [Show Picture]

Water Pump - For models A, B, C, CA Without Bypass Hole. REPLACES OEM # 79003713-R (Part No: 79003713)$94.24

Water Pump - For models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. Water pump with gasket and o-rings, less pulley and back housing. Replaces 74035859, 74062317. (Part No: 74036573)$161.26 [Show Picture]

Water Pump - For 170, 175 diesels using Perkins engines. Water pump assembly, less pulley. (Part No: 79003714LBH)$49.28 [Show Picture]

Water Pump - Without pulley. For models B, C, CA, D-10, D-12, D-14 Also Replaces 250397. (Part No: 79016821)$97.75 [Show Picture]

Water Pump - Without pulley. For models WC, WD, WD45, WF ALL with gas engines. Casting numbers 9009248, 125577. (Part No: 79016822)$116.65 [Show Picture]

Water Pump - For D10, D12, D15, 160 all with Gas engine. Water Pump with pulley. (Part No: 79004256)$100.38 [Show Picture]

Water Pump Pulley - Used with water pump 79004256. For models D10, D12, D15 all with fixed pulley. (Part No: 70233395)$24.54 [Show Picture]

Water Pump Pulley - For water pump 72090472. For models 5040, 5045, 5050. (Part No: 72089641)$29.96

Water Pump with Single Pulley - Replaces 129433 casting # 229465 . For models 170, 175, D17 all with gas engines. (Part No: 79003710)$124.40 [Show Picture]

Water Pump, with Double Pulley - For models (D17 with diesel eng SN# up to 119938 except between SN# 117087-117104), WD45 with diesel engine. (Part No: 74517291)$145.42 [Show Picture]

Water Separator Element - WATER SEPARATOR ELEMENT For 200, L2, M, M2, MH2, N5, N6, N7 (Part No: 71367686)$29.10

 
Decals and Emblems
AC Diamond Decal - Black & White, Milwaukee, 6" x 6", Vinyl Cut. (Part No: R4634)$15.50 [Show Picture]

AC Diamond Decal - Orange Background, 5 1 2" x 5 1 2". (Part No: R4633)$9.62 [Show Picture]

AC Diamond Decal - Black & white, 4" x 4", Vinyl Cut. (Part No: R4632)$12.40 [Show Picture]

AC Diamond Decal - 1" x 1" orange, blue and gold printed on vinyl. (Part No: R5234)$3.10 [Show Picture]

AC Logo Decal - 1-1 2" x 8", black and orange on white. (Part No: R0675)$6.20 [Show Picture]

AC Logo Decal - 3" x 18", black and orange on white. (Part No: R0676)$14.72 [Show Picture]

AC Logo Decal - 24" long, black and orange. (Part No: R0677)$29.26 [Show Picture]

AC Logo Decal, New Style - 1-1 2" x 1-1 2" black and orange on white. (Part No: R5167)$4.66 [Show Picture]

AC Logo Decal, New Style - 3-1 2" x 3-1 2" black and orange on white. (Part No: R5168)$6.20 [Show Picture]

AC Logo Decal, New Style - 4-1 2" x 4-1 2" black and orange on white. (Part No: R5169)$7.76 [Show Picture]

AC Logo Decal, New Style - 8" x 8" black and orange on white, printed on vinyl. (Part No: R5233)$29.46 [Show Picture]

Crop Hustler Decals - One pair. For models 170, 175, 180, 185, 190, 190XT, 200. (Part No: R0672)$23.56

Decal Hood Set - Hood Only Decal Set for Allis Chalmers Model 5040. Printed on Vinyl. (Part No: R4038)$33.60

Decal Set - For model WC (1933-1938). Set of 10 self adhesive decals. Blue Letters, long letters A & C with border. Printed on Vinyl (Part No: ACWC)$23.95 [Show Picture]

Decal Set - For model WC (1939-1940). Set of 10 Self-adhesive decals. Blue letters, long letters A & S without border. Printed on Vinyl. (Part No: ACWCL)$23.95 [Show Picture]

Decal Set - For model WC (Black letters. 1941-1948). Set of 12 self adhesive decals. Printed on Vinyl. (Part No: ACWCB)$23.95 [Show Picture]

Decal Set - Side Panel Decals Only for Model 7045. (Part No: R4413)$120.96

Decal Set - Complete Decal Set for Allis Chalmers Model 200. Made of vinyl. (Part No: R3469V)$142.16

Decal Set - Hood Set for AC 7060. (Part No: AC7060)$53.37

Decal Set - For model C. BLUE Set of 13 self adhesive decals. Printed on Vinyl. (Part No: ACC)$23.95 [Show Picture]

Decal Set - For model C. Dress up that old work partner with a set of 13 self-adhesive decals. Printed on Vinyl. (Part No: ACCB)$23.95 [Show Picture]

Decal Set - For model G. Dress up that old work partner with a set of 6 self-adhesive decals (Includes wiring diagram decal). Printed on Vinyl. (Part No: ACG)$23.95 [Show Picture]

Decal Set - For model B. Set of 13 self-adhesive decals. This set has blue letters with the long A and S. Printed on Vinyl. (Part No: ACB)$23.95 [Show Picture]

Decal Set - For model B. Set of 13 self-adhesive decals. Black letters Printed on Vinyl. (Part No: ACBB)$23.95 [Show Picture]

Decal Set - For model B (Black letters with long A & S). Set of 12 self adhesive decals. Printed on Vinyl. (Part No: R2430)$34.88

Decal Set - For D15 Series II. Set of 17 self adhesive decals. Printed on Mylar. (Part No: R1870)$77.42 [Show Picture]

Decal Set - For model D10 (1957-1960). Set of 17 self-adhesive decals. Hood Decal is 25 1 2 inches long. Printed on Vinyl. (Part No: R1865)$41.85 [Show Picture]

Decal Set - For model D12. Set of 15 self-adhesive decals. Printed on Vinyl. (Part No: R1866)$41.85 [Show Picture]

Decal Set - For model D14. Set of 16 self-adhesive decals. Printed on Vinyl. (Part No: R1867)$41.85 [Show Picture]

Decal Set - For model D15. Set of 16 self-adhesive decals. Printed on Vinyl. (Part No: R1868)$41.85 [Show Picture]

Decal Set - For CA. Blue Letters. Complete decal set. Printed on Vinyl. (Part No: ACCA)$23.95 [Show Picture]

Decal Set - For CA. Black Letters. Complete decal set. Printed on Vinyl. (Part No: ACCAB)$23.95 [Show Picture]

Decal Set - For IB. Complete decal set. Printed on Vinyl. (Part No: R2549)$43.94

Decal Set - For RC. Blue Letters. Complete decal set. Printed on Vinyl. (Part No: ACRC)$23.95 [Show Picture]

Decal Set - For RC. Black Letters. Complete decal set. Printed on Vinyl. (Part No: ACRCB)$23.95 [Show Picture]

Decal Set - For U. Complete decal set. Printed on Vinyl. (Part No: R1276)$21.70

Decal Set - For UC. Complete decal set. Printed on Vinyl. (Part No: R1277)$27.90

Decal Set - For WF. Black Letters. Complete decal set. Printed on Vinyl. (Part No: ACWFB)$23.95 [Show Picture]

Decal Set - For WF. Black Letters with long A & S. Complete decal set. Printed on Vinyl. (Part No: ACWF)$23.95 [Show Picture]

Decal Set - For WF 1940 and up. Complete decal set. Printed on Vinyl. (Part No: R1864)$44.12

Decal Set - Decal Set for Allis Chalmers Model D17 (1957-1960 only). Printed on Vinyl. (Part No: R1869)$41.85 [Show Picture]

Decal Set - Complete set (With Oval Model Number) for Allis Chalmers Model D17. Printed on Vinyl. (Part No: R2545)$50.22

Decal Set - Complete set for Allis Chalmers Model D17 Diesel only. Printed on Vinyl. (Part No: R2546)$54.41

Decal Set - Decal Set for Allis Chalmers Model D17(Series IV only). Printed on Vinyl. (Part No: R1270)$77.42 [Show Picture]

Decal Set - Complete set for Allis Chalmers Model D17(Series IV Diesel Only). Printed on Vinyl. (Part No: R1872)$77.42

Decal Set - Complete set for Allis Chalmers Model D19(Diesel Only). Printed on Vinyl. (Part No: R2432)$123.46

Decal Set - Complete set for Allis Chalmers Model D21(Series II only). Printed on Vinyl. (Part No: R1271)$94.16

Decal Set - Decal Set for Allis Chalmers Model 160. Printed on Vinyl. (Part No: R2617)$35.25 [Show Picture]

Decal Set - Complete set for Allis Chalmers Model "One-Sixty" Only. Printed on Vinyl. (Part No: R2618)$131.07

Decal Set - Hood Only Decal Set for Allis Chalmers Model 170 with Black Stripe. Printed on Vinyl. (Part No: R2619)$35.25

Decal Set - Complete set for Allis Chalmers Model "One-Seventy". Black Letters on a White Background Printed on Vinyl. (Part No: R2620)$131.07

Decal Set - Hood only set for Allis Chalmers Model 175. Printed on Vinyl. (Part No: R2621)$35.25

Decal Set - Decal Set for Allis Chalmers Model 180. Printed on Vinyl. (Part No: R4031)$35.25 [Show Picture]

Decal Set - Complete set for Allis Chalmers Model 180. Printed on Mylar. Does not include Crop Hustler or Diesel decals, sold seperately. (Part No: R2622)$131.07

Decal Set - Hood Only Decal Set for Allis Chalmers Model 185. Printed on Vinyl. (Part No: R2623)$35.25

Decal Set - Hood only set for Allis Chalmers Model 190. Printed on Vinyl. (Part No: R4032)$35.25

Decal Set - Complete set for Allis Chalmers Model "One-Ninety" only. Printed on Vinyl. (Part No: R4033)$131.07

Decal Set - HOOD Decal Set for Allis Chalmers Model 190XT. Printed on Vinyl. (Part No: R4034)$35.25 [Show Picture]

Decal Set - COMPLETE Decal Set for Allis Chalmers Model "One-Ninety XT" only. Creme background with Black lettering. If you are ordering for a Diesel, you need to add 2 pieces of R0670 at $10 each. If needed place comment in the comments section of the order form. (Part No: R2624)$185.22

Decal Set - Complete set for Allis Chalmers Model "One-Ninety XT Series III" only. Printed on Vinyl. (Part No: R2625)$152.62

Decal Set - Hood Only Decal Set for Allis Chalmers Model 200. Printed on Vinyl. Complete Die cut Tractor Set is available as R3469V. (Part No: R3469)$35.25

Decal Set - Hood only set for Allis Chalmers Model 210. Printed on Vinyl. (Part No: R4035)$35.25

Decal Set - Complete set for Allis Chalmers Model "Two-Ten" only. Printed on Vinyl. (Part No: R2626)$147.42

Decal Set - Decal Set for Allis Chalmers Model 5020. Hood Decal Only. Printed on Vinyl. (Part No: R4036)$33.60 [Show Picture]

Decal Set - Decal Set (Hood Only) for Allis Chalmers Model 5030. Printed on Vinyl. (Part No: R4037)$33.60

Decal Set - HOOD ONLY Decal Set for Allis Chalmers Model 5050. Printed on Vinyl. (Part No: R4039)$33.60

Decal Set - Decal Set HOOD ONLY for Allis Chalmers Model 6060 . Printed on Vinyl. (Part No: R4040)$35.25

Decal Set - Hood only set for Allis Chalmers Model 6080. Printed on Vinyl. (Part No: R4041)$35.25

Decal Set - Hood only set for Allis Chalmers Model 6690(AGCO Allis). Printed on Vinyl. (Part No: R4042)$46.58

Decal Set - Side Panel set for Allis Chalmers Model 7000. Printed on Vinyl. (Part No: R4043)$46.58

Decal Set - Side Panel set for Allis Chalmers Model 7040. Printed on Vinyl. (Part No: R4044)$46.58

Decal Set - Side Panel set for Allis Chalmers Model 7050. These are BLACK. This model originally came in 2 colors. The Maroon Decals are not available. (Part No: R4045)$46.58

Decal Set - Side Panel set for Allis Chalmers Model 7080. Printed on Vinyl. (Part No: R4046)$46.58

Decal Set - Hood only set for Allis Chalmers Model 7600(AGCO Allis). Printed on Vinyl. (Part No: R4047)$46.58

Decal Set - Hood only decal set Allis Chalmers Model 8010. Printed on Vinyl. (Part No: R4048)$54.00

Decal Set - Hood only decal set Allis Chalmers Model 8610(AGCO Allis). Printed on Vinyl. (Part No: R4049)$54.00

Decal Set - Complete for IB. VINYL Decal Set. Vinyl sets are Individual Letter Numbers sets - Not full sheet type. (Part No: R2549V)$65.06

Decal Set - Gas - For model WD45. Set of 10 self-adhesive decals. Black letters. Printed on Vinyl. (Part No: ACWD45B)$23.95 [Show Picture]

Decal Set - Gas - For model WD45. Set of 10 self-adhesive decals. Blue letters with long A and S. Printed on Vinyl. (Part No: ACWD45)$23.95 [Show Picture]

Decal Set - Vinyl - Complete for C. VINYL Blue Letters WITH LONG A & S Decal Set. Vinyl sets are Individual Letter Numbers sets - Not full sheet type. (Part No: R0757V)$65.06

Decal Set - Vinyl - Complete for C. VINYL Black Letter Decal Set. Vinyl sets are Individual Letter Numbers sets - Not full sheet type. (Part No: R0761V)$63.79

Decal Set - Vinyl - Complete for CA. VINYL Black Letter Decal Set. Vinyl sets are Individual Letter Numbers sets - Not full sheet type. (Part No: R1269V)$63.79

Decal Set - Vinyl - Complete for G. Vinyl sets are Individual Letter Numbers sets - Not full sheet type. (Part No: R0760V)$41.92

Decal Set - Vinyl - Complete for RC. VINYL Blue Letter Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R1274V)$65.06

Decal Set - Vinyl - Complete for RC. VINYL Black Letter Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R1275V)$65.06

Decal Set - Vinyl - Complete for WC (1933-1938). VINYL Blue Letters WITH LONG A&S WITH BORDER Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R1278V)$103.88

Decal Set - Vinyl - Complete for WC (1939-1940). VINYL Blue Letters WITH LONG A&S WITHOUT BORDER Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R1279V)$66.43

Decal Set - Vinyl - Complete for WC (1941-1948) VINYL Black Letters Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R1280V)$63.79

Decal Set, Black Letters - For model WD. Set of 10 self adhesive decals. Letters are BLACK. Printed on Vinyl. (Part No: ACWDB)$28.88 [Show Picture]

Decal Set, Blue Letters - For model WD. Set of 10 self adhesive decals, BLUE letters. Printed on Vinyl. (Part No: ACWD)$23.95 [Show Picture]

Decal Set, Chassis - For model D17 includes model numbers for models with metal nameplates. (Part No: R4638)$32.55

Decal Set, Chassis - For model D15 includes model numbers for models with metal nameplates. (Part No: R4637)$32.55

Decal Set, Chassis - For model D12 includes model numbers for models with metal nameplates. (Part No: R4636)$32.55

Decal Set, Chassis - For model D10 includes model numbers for models with metal nameplates. (Part No: R4635)$32.55

Decal Set, Complete - Complete set with chrome. For model D10 series II. (Part No: R0419)$62.84

Decal Set, Complete - Complete set with chrome. For model D12 series II. (Part No: R0420)$62.84

Decal Set, Complete - Hood decal is Black Lettering on a Creme color background. For model D15 series II diesel. (Part No: R0440)$143.64

Decal Set, Complete - Complete set with chrome. For model D15 series II gas. (Part No: R0443)$269.33

Decal Set, Complete - Complete set with chrome. For model D17 series IV gas. (Part No: R0514)$377.06

Decal Set, Complete - Complete set with chrome. For model D15 series II diesel. (Part No: R0493)$269.33

Decal Set, Complete - For model ED40. Printed on vinyl. (Part No: R0573)$118.50

Decal Set, Complete - For model D17 diesel 1957-1960 with black bar grill. (Part No: R5232)$45.72

Decal Set, Die Cut - Complete for B. VINYL Black Letter Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R0755V)$63.79

Decal Set, Die Cut - Complete for B. VINYL Black Letters WITH LONG A & S Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R2430V)$63.79

Decal Set, Die Cut - Complete for B. VINYL Blue Letters WITH LONG LETTER A & S Decal Set. Individual Letter Numbers sets - Not full sheet type. (Part No: R0756V)$66.43

Decal Set, Diesel - This decal set contains 18 self adhesive decals. For model WD45D. (Part No: R2616)$43.74

Decal Set, Hood - Black and white, curved. For model 8070. (Part No: R4645)$54.00

Decal Set, Hood - Black and white, curved. For model 8030. (Part No: R4644)$102.06

Decal Set, Hood - Curved black and white. For model 5030. (Part No: R0587)$61.05

Decal Set, Hood - Curved to hood. For model 8050. (Part No: R5194)$54.00

Decal Set, Side Panels - Black chassis. For model 7060. (Part No: R4643)$54.00

Decal Set, Side Panels - For model 7030. (Part No: R4642)$54.00 [Show Picture]

Decal Set, Side Panels - Black chassis. For model 7010. (Part No: R4641)$120.96

Decal Set, Side Panels - For model 6040. (Part No: R4640)$33.60

Decal Set, Side Panels - For model 5045. (Part No: R4639)$33.60

Decal Set, Side Panels - Printed on vinyl. For model 440 Steiger. (Part No: R0581)$61.05

Decal Set, Side Panels Only - Maroon chassis. For model 7060. (Part No: R0588)$91.57

Decal Set, Side Panels Only - Black chassis. For model 7580. (Part No: R0608)$122.09

Decal Set, Side Panels Only - Black chassis. For model 8550. (Part No: R0613)$122.09

Decal Set, Side Panels Only - Vinyl, Maroon chassis. For model 7030. (Part No: R2015)$91.57

Decal Set, Vinyl - Complete set for Allis Chalmers Model D17(Series III Only). Printed on Vinyl. (Part No: R1871V)$362.62

Decal Set, Vinyl Cut - Decal Set for Allis Chalmers Model D19. Printed on Vinyl. (Part No: R1873)$325.25 [Show Picture]

Decals, Hood Set - For model 180. (Part No: AC180)$31.98

Diesel Decal - Individual decal, black lettering on creme. For models 160, 170, 180, 190, 190XT, 210, 220. (Part No: R0670)$12.40

Diesel Decal - Individual, creme lettering on black. FOr Models: 160, 170, 175, 180, 185, 190, 190XT, 200. (Part No: R0671)$12.40

Emblem - For models Late D15, D17, E-3 Gleaner. (Part No: 246724)$47.95 [Show Picture]

Emblem, Hood, AG Tractor - Qty (1). This is a raised-letter hood side emblem for Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has the Allis-Chalmers crθme background with black letters. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Part No: 70233854)$66.00 [Show Picture]

Emblem, Hood, INDUSTRIAL Tractors - Qty (1). This is a raised-letter hood side emblem for INDUSTRIAL Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has a black background with unpainted letters. Please Note: picture does not show correct color. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Part No: R4520)$67.50 [Show Picture]

Landhandler Decals - One pair. For models 170, 180, 190, 190XT, 210, 220. (Part No: R0673)$23.56

Power Shift Decals - One pair, white. For the cab on some Allis models. (Part No: R0674)$23.94

Power Steering Emblem - For models D14, D15, D17. (Part No: 232712)$64.73 [Show Picture]

 
Drive Train
Bearing Cup - Rear axle outer cup, Timken number 29620. For models 190, 190XT, D17. (Part No: 70057005)$22.94 [Show Picture]

Bearing Cup - Rear axle inner cup, Timken number 3920. For models 190, 190XT, D17. (Part No: 70202584)$19.28 [Show Picture]

Control Lever Knob - Three knobs used per tractor. Fits: D10, D12, D14, D15, D17, D19. Also Replaces 70228215. (Part No: 228215)$6.00 [Show Picture]

Coupling - For 180, 185, 190, 190XT, 200. Coupling can be used with 70246529 Gear. (Part No: 70261442)$85.96 [Show Picture]

Driveshaft Hanger Bearing, MFD - For models 8775, 8785. (Part No: 3386985M1)$39.90

Final Drive Clutch Knob - Plastic knob, 3 8" fine thread. For model CA. (Part No: R4572)$7.00 [Show Picture]

Final Drive Pan Gasket - For models B, C, CA, D10, D12, D14, D15, ED40, I60, I500, I600. Replaces 70233186, 70225103. (Part No: 70205515)$14.95 [Show Picture]

First and Second Mainshaft Gear - For models D17, 170, 175. First and Second Mainshaft Gear. (Part No: 70232532)$156.56 [Show Picture]

Gear Collar, 3rd & 4th - 15 outer teeth, 12 inner teeth, .838" wide. For models 190XT, 190XT III, (200 SN# 4001 and up). (Part No: 70257033)$88.31 [Show Picture]

Gear Shift Boot - This is an original-style gear shift boot for Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Part No: R4457)$13.90 [Show Picture]

Gear Shift Boot - 2-1 16" bottom I.D., 11 16" hole dia. For model G. (Part No: 800354)$19.20 [Show Picture]

Gear Shift Boot - For models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Part No: 233767)$13.90 [Show Picture]

Gear Shift Knob - Fits: B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. (Part No: 226023)$7.30 [Show Picture]

Gear, 1st, Main Shaft - 18 tooth. For models D10, D12, D14, D15. (Part No: 225415)$68.75

Gear, 1st, Pinion Shaft - 50 tooth. For models (CA SN# 13291 and up), (D10 SN# 3501 and up), (D12 SN# 3001-9000), D14, (D15 SN# up to 17565). (Part No: 70228296)$131.11 [Show Picture]

Gear, 2ND, Pinion Shaft - 41 tooth. For models CA SN# 13291 and up, D10, D12, D14, D15. Replaces 70228290. (Part No: 70234168)$158.70 [Show Picture]

Gear, 2nd, Mainshaft - 26 tooth. For models D10, D12, D14, D15. (Part No: 234167)$86.63

Gear, 3rd, Main Shaft - 30 tooth. For models CA, D10, D12, D14, D15. (Part No: 70225413)$115.92 [Show Picture]

Gear, 4th, Mainshaft - 49 teeth. For models D10, D12, D14, D15. (Part No: 225414)$113.92

Gear, 4th, Pinion Shaft - 24 tooth. For models (CA SN# 13291 and up), D10, D12, D14, D15. (Part No: 70228294)$116.71 [Show Picture]

Gear, Reverse - 24 tooth. For model 7000. (Part No: 70261963)$169.86 [Show Picture]

Gear, Reverse Countershaft - For models 180, 185, (190 SN# 9001 and up), 200. (Part No: 70246545)$102.79 [Show Picture]

Gear, Reverse Idler - 21 tooth. For models CA, (D10 SN# 3501 and up), (D12 SN# 3001 and up), (D14 SN# 19001 and up), D15. (Part No: 70232498)$122.61 [Show Picture]

Gear, Reverse Idler - 24 20 tooth. For models WC, WF, (WD, WD45 SN# up to 127007). (Part No: 70226113)$71.28 [Show Picture]

Gear, Reverse, Mainshaft - 19 teeth. For models D10, D12, D14, D15. (Part No: 234028)$99.34 [Show Picture]

Gear, Reverse, Pinion Shaft - 30 tooth. For models (CA SN# 13291 and up), (D10 SN# 7760 and up), (D12 SN# 6091 and up), D14, D15. (Part No: 70241367)$133.88 [Show Picture]

Input Shaft Seal, MFD - For models 8745, 8765, 8775, 8785, 9735, 9745, 9755, 9765. (Part No: 3428942M1)$23.93

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)$9.06 [Show Picture]

Main Shaft Coupling - For models D10, D12, D14, D15. Replaces 246528, 261442. (Part No: 232452)$67.28

Pinion Shaft Coupling - For models (CA SN# 13291 and up), D10, D12, D14, D15. Replaces 70225833. (Part No: 70228295)$102.69 [Show Picture]

Pinion Shaft Gear, 3rd - 37 tooth. Also replaces 228293, 233997, 234575. For models CA, D10, D12, 6090, D14, D15. (Part No: 70225831)$198.00

REVERSE GEAR - For D17, 180, 185, 190, 190XT, 200, (170, 175 without shutle clutch). Reverse Gear. (Part No: 70232529)$142.51 [Show Picture]

Rear Axle - Fits: G; Replaces: 70800667, 70800902, 800667, 800902 24-3 8" Overall Length (Part No: 70800902)$197.37

Rear Axle Oil Seal - For models B, B125, C, CA, IB. Outside diameter 3.5 inches. Inside diameter 2.5 inches. 7 16 inch thick. (Part No: 70206450)$14.80 [Show Picture]

Rear Axle Seal - For models D10, D12, D14, D15. (Part No: 70218284)$12.02

Second Gear - For models 180, 185, 190, 190XT, 200. Second Gear. (Part No: 70246531)$160.03 [Show Picture]

Second Mainshaft Gear - For model 175. Second mainshaft Gear. (Part No: 70255333)$143.96 [Show Picture]

Second Mainshaft Gear - For models D17, 170. Second Mainshaft Gear. (Part No: 70232408)$179.51 [Show Picture]

Shift Boot - For models 6060, 6070, 6080. (Part No: 72092568)$3.32 [Show Picture]

Sliding Gear Transmission Mainshaft - For models 180, 185, 190, 190XT, 200. Sliding Gear Transmission Mainshaft. (Part No: 70246535)$164.18 [Show Picture]

Third Gear - For models D17 SN# 24001 to 71326, D19 up to SN# 15151, 170, 175. Third Gear. (Part No: 70240940)$240.68 [Show Picture]

Third Gear - For models 180, 185, 190, 190XT, 200. Third Gear. (Part No: 70246529)$124.50 [Show Picture]

Third Gear Transmission Countershaft - For models 180, 185, 200, (190, 190XT SN# above 9001). (Part No: 70246543)$125.50 [Show Picture]

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both SN# 127007 and up). Third and Fourth Gear Coupling (Part No: 70232452)$99.73 [Show Picture]

Third gear, Countershaft - For models 170, 175, (190, 190XT, 190XT III all up to SN# 9001), (D17 SN# 24001 and up), (D19 SN# 15151 and up). (Part No: 70247728)$159.79 [Show Picture]

Transmission Input Shaft - For models 180, 185, 200, 190XT, (190 SN# 9001 and up). Transmission Input Shaft. (Part No: 70256571)$159.53 [Show Picture]

Transmission Input Shaft - For models D17, D19, 170, 175. Transmission Input Shaft. 21 - 20 - 8 Tooth. 9.92 inches in total length. (Part No: 70239530)$176.24 [Show Picture]

Transmission Main Splined Collar - For 180, 185, 200, (190, 190XT SN# 9001 and up). Transmission Main Splined Collar (Part No: 70246532)$96.96

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator - Remanufactured external regulator, 12 volt, 61 Amp. Use repair kit ARK-1. For 160, 190, 190XT, D21 (Part No: 1100883)$131.77 [Show Picture]

Alternator - Remanufactured internal regulator, 63 Amp. 3 terminal three o'clock position, use repair kit ARK-4. For 7030, 7040, 7050, 7060, 7080 (Part No: 1102920)$101.66 [Show Picture]

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator - 12 volt, 61 amp. For models (F2 1978-80 with either 292 gas, 4-200 dsl, or 2350 dsl), (G 1978-79 with either 250 gas or 2300 dsl), (K2 with 1978-81 with either 250 gas or 4-200 dsl), (L 1972-76 with either 350 gas or 6-301 dsl), (L2 1977-79 with either 6-301 dsl or 6-426 dsl), (M 1973-77 with either 350 gas or 6-301 dsl), (M2 1977-79 with either 350 gas, 6-301 dsl or 6-426 dsl), (6060, 6070, 6080 1980-86 with 4-200 dsl), (7000, 7010, 7020 1978-81 with 6-301 dsl), (7040, 7050, 7060, 7080 1974-75 with 6-426 dsl), (8010 1982-85 with 6-301 dsl). Replaces 1102936, 1103165, 1103035. (Part No: ADR0133)$123.38 [Show Picture]

Alternator - 12 volt, 55 amp. For models (E-III 1967-68 with 4-226 gas), (E-III 1969 with 6-250 gas), (F 1967-76 with 6-301 dsl), (F 1971-76 with 292 gas), (F 1967-70 with 6-262 gas), (G 1971-72 with 350 gas), (G 1967-70 with 2800 gas), (G 1967-72 with 6-301 dsl), (K 1969-76 with 250 gas), (D21 1963-65 with 6-426 dsl without tach drive), (190 1964-72 with 6-265 gas), (190 1964-67 with 6-301 dsl). Replaces 1100807, 1100808, 1100630, 1100720. (Part No: ADR0231)$112.33 [Show Picture]

Alternator - 12 volt, 105 amp. For models (F2 1981-82 with 292 gas or 4-200 dsl), (F3 1983-85 with 4-200 dsl), (K2 1981-85 with 4-200 dsl), (N5, N6 1978-86 with 6-426 dsl), (N7 1979-86 with 685 dsl). Replaces 1105539. (Part No: ADR0195)$125.53 [Show Picture]

Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For models (F2 1977 with 292 gas or 6-301 dsl), (K2 1977 with 250 gas or 4-200 dsl), F85, (7000 1975-77 with 6-301 dsl). Replaces 1102876, 1100580, 1100578. (Part No: ADR0239)$79.33 [Show Picture]

Alternator - For models (5040 1976-80 with 3-143 Uzina diesel), (7030, 7040, 7045, 7060, 7080, 7580 1976-81 with 6-426 diesel). Replaces A1-151. Please allow up to 2 weeks delivery on this item. (Part No: ANE0001)$843.48

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)$39.25 [Show Picture]

Alternator, Delco Type, 12 Volt - For models D, D10, D12, D14, D15, D17, D19, DD, H3, HD3, RT40. Replaces Delco # 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59)$213.92

Alternator, New - 12 volt, 65 amp, less pulley. For models 6670, 6680, 6690, 8610, 8630. Replaces Magneti Marreli# 63320013, 63320023, 63320037, 63321040, 63321042, 63321079, 636321418, MAN283, MAN770, MAN795; Iskra # 1A0463. (Part No: 72272430)$208.05 [Show Picture]

Battery Cable - Battery cables, ground. For D10, D12. (Part No: 70241893)$20.94 [Show Picture]

Brush Holder - Swing arm brush holder assembly for Delco tractor alternators: 1102920, 1102921, 1102922, 1103035, 1103165, 1105422, 1105423. For 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7050, 8010. (Part No: 70262167)$27.84 [Show Picture]

Coil Bracket - Universal Coil Bracket (Part No: R1940)$6.61 [Show Picture]

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)$35.99 [Show Picture]

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)$39.21 [Show Picture]

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)$32.82 [Show Picture]

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)$35.99 [Show Picture]

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)$36.89 [Show Picture]

Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)$35.25 [Show Picture]

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kitsor or any 6 volt system using the "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)$39.68 [Show Picture]

Distributor Cap - Distributor cap. For D19 (Part No: 74042704)$13.08

Distributor Cap - For 4 cylinder Clip Type Cap For Delco Distributors:: B, C, (CA engine SN# CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 SN# 136318 and up). Replaces Delco 811735, and 70225733. (Part No: 1750411M91)$9.60 [Show Picture]

Distributor Cap 6 Cylinder - Distributor cap. For 190 (Part No: 1960810)$11.26 [Show Picture]

Distributor Dust Cover - Fits early delco distributor with clip held cap. For models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734. (Part No: 1900119)$9.90 [Show Picture]

Distributor, Rebuilt - For model D10. (Part No: 1112609)$233.25

Distributor, Rebuilt - For models D10, D12, D14, D15, D17 all built between 1959 and 1965. (Part No: 1112593)$252.70

Distributor, Rebuilt - For model D14. (Part No: 1111745)$248.99

Electric Box Panel, Rear - For models RC, WC, WF. (Part No: 208129)$24.95 [Show Picture]

Electric Box Panels, Front & Rear - For models B, IB, C, CA. Replaces Front panel 210913, 225309, 218942 and Rear panel 210914. (Part No: ACS299)$49.50 [Show Picture]

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. For 12 Volt Negative Ground systems only. Tractor models D19, 180, 185, 190 and 190XT. (Part No: 1163A)$72.89 [Show Picture]

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. (Part No: 1142)$81.11 [Show Picture]

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Fits 170 and 175 with 4-cylinder 226 CID engines using Delco distributor #1112688. 12 Volt Negative ground. Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. (Part No: 1146A)$72.89 [Show Picture]

Electronic Ignition Conversion Kit, 12 volt negative ground - 12 VOLT NEGATIVE Ground. For Tractor Model D19. For the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on 12 VOLT NEGATIVE ground system. (Part No: 1168LS)$84.73

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models D19, 180, 185, 190, 190XT. (Part No: 91163A)$103.57 [Show Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models 170 and 175 with 4-cylinder 226 CID engines using Delco distributor #1112688. (Part No: 91146A)$101.05 [Show Picture]

Fairbanks Morse, Condenser - Services Fairbanks Morse Magneto: FM-J1A, B, 2A, 4A, K magnetos.Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: AXMR2433)$9.86 [Show Picture]

Fairbanks Morse, End Cap Cover - Services Fairbanks Morse Magneto: FM-J4, FM-OX4, FM-B1 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: C800)$87.76 [Show Picture]

Fairbanks Morse, End Cap Less Gear - Services Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Tractors: B, C, CA, WC, RC, WD, U, UC. (Part No: CX2430)$99.60 [Show Picture]

Fairbanks Morse, Gear with Shaft - Fits cap CX2430, for Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Does have timing marks. For tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: N5939)$53.22 [Show Picture]

Fairbanks Morse, Molded Coil - Services Fairbanks Morse Magneto: FM-JE4, FM-X4, FM-XE4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: R2477C)$61.60 [Show Picture]

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM, FM-H, FM-K, FM-OH, FM-R magnetos. On tractors, B, C, CA, RC, WC, WD, U, UC. (Part No: P2437)$77.91

Fairbanks Morse, Point Set - Services Fairbanks Morse Magneto: FM-J, FM-JE, JM-JG, FM-T magnetos. Tractors B, C, CA, RC, WC, WD, U, UC. (Part No: R2437POINTS)$26.90

Fairbanks Morse, Rotor - Services Fairbanks Morse Magneto with 2 piece cap: FM-J4, JV4, XV4 magnetos. Tractors: B, C, CA, RC, WC, WD, U, UC. (Part No: M2765)$16.95 [Show Picture]

Flasher Unit - 12 volt, round, 2 terminal, 4 light max. For models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5045, 5050, 6040, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8550, D21. (Part No: 70248109)$5.28

Generator - 6 volt, 35 amp. For models D10 SN# 3501 and below, D12 SN# 3000 and below, D14 SN# 19000 and below. Refundable $25.00 core charge will be added to orders. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 79004800. (Part No: TG-72)$266.48 [Show Picture]

Generator - 12 volt, 22 amp. For model 5000 1969-72 with Lucas generator. Does not include pulley. (Part No: GLU0001)$123.05 [Show Picture]

Generator, 12 Volt - Pulley not included. For models D10, D12, D14, D15, D17, D19 all from 1959-1965. Replaces 1100305. (Part No: 1100332)$243.48

Generator, 12 Volt - Pulley not included. For models D10, D12, D15, D17, D19 all from 1961-1964. Replaces 1100426. (Part No: 1100321)$352.85

Generator, 12 Volt - Pulley not included. For model WD45 diesel from 1954-1956. (Part No: 1100994)$147.01

Generator, 6 Volt - Pulley not included. For models D10, D12, D14 all gas built from 1957-1960. Replaces 1100055, 1100025, 1100042. (Part No: 1100052)$196.53

Generator, 6 Volt - Pulley not included. For model G built from 1948-1956. Replaces 1101854. Additional $40 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. PLEASE CALL AVAILABILITY. (Part No: 1101851)$249.44

Generator, 6 Volt, Rebuilt - Replaces 1101357, 1101363, 1101373, 1101378, 1101379, 1101382, 1101386, 1101413. For models B, C, CA, WC, WD, WF, WD45. All 1939-1958. Pulleys are NOT included. Add $25.00 Refundable Core Charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1191634)$208.98 [Show Picture]

Ground Strap - Battery cable, ground. 11 inches long. For models WD, WD45. (Part No: 70222510)$14.66 [Show Picture]

Ground Strap - Battery cable, ground. 12.5 inches long. For WD45. (Part No: 70226938)$15.54 [Show Picture]

Ground Strap - Battery cables, ground. For models D14, D17. (Part No: 70229941)$11.82 [Show Picture]

Ignition Kit - Ignition kit for Delco distributor with screw held cap. Contains points, condenser, and proper point gap gauge. For F, K (Part No: ATK10DS)$9.90

Ignition Kit, Comprehensive, Delco Clip-Held Distributor - For 4 Cylinder Gas Engines. Includes Spark Plugs, Points, Condenser, Rotor, Distributor Cap, and universal plug wire set. For AC tractors using CLIP-HELD Delco distributor and 14mm, 3 8" reach 13 16" hex spark plugs. Fits: CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco distributor # 112688. (Part No: ACTUNEKIT)$40.08 [Show Picture]

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. Contains points, condenser, rotor, and proper point gap gauge. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19. (Part No: ATK1DCR)$11.98 [Show Picture]

Ignition Switch - Ignition Switch, with keys. For models with distributor ignition. Models: B, C, CA, D14, WD, WD45. (Part No: 70225310)$8.84 [Show Picture]

Key Switch - 5 terminal, with keys and jam nut. For models D10, D12, (D14 from SN# 9500 and up), (D15 up to SN# 9000), (D17 up to SN# 75000), D19, D21. Replaces 235785, 231705, 233320, 229201, 234356. (Part No: 230163)$43.13

Light Switch - For models 160, 170, 175, 180, 185, 190, (190XT from SN# 19001 and up), 200, 210, 220, 6040. (Part No: 249142)$33.75 [Show Picture]

Light Switch Plate - For models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040. (Part No: 249141)$24.80 [Show Picture]

Magneto Cap - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: FXG2002A-2)$60.15

Magneto Cap Gasket - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: XHGK)$4.05

Magneto Coil - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: FXH2403)$57.50

Magneto Condensor - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: FXH2024)$15.25

Magneto Mounting Gasket - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: ABC556)$2.50

Magneto Point Set - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: FXH2100B_)$22.45

Magneto Rotor - For XH894 Wico Magneto. Models B, IB, C, RC, WC, WD, WF. (Part No: FXG1008)$33.95

Magneto, Rebuilt - Right hand flange mount. For 4 cylinder Models: SC and DC (Part No: R1196781)$540.47

Magneto, Wico XH - Complete magneto, includes mounting bracket. For models B, IB, C, RC, WC, WD, WF, U, UC & others. Replaces Fairbanks Morse FM series. (Part No: XH894)$410.05 [Show Picture]

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)$14.25 [Show Picture]

Resistor Kit - Resistor kit. Used with Voltage Regulator #VR1813 for conversion using cut-out, Delco 1116809. For B, C, CA, WC, WD, WD45, WF. (Part No: VRK1815)$36.51 [Show Picture]

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER)$0.00

Solenoid - Starter solenoid, 12-volt. Services Delco starters 1113412, 1113419. For models 7030, 7040, 7045, 7050, 7060, 7080, 7580. (Part No: 70269209)$41.18

Solenoid Switch - Solenoid switch, 6-volts For models using Delco starters 1108036, 1107466, 1107474. For B, C, 100, D10, D12, D14 (Part No: 70223334)$21.82 [Show Picture]

Solenoid Switch - Solenoid and manifold heater switch, 12-volt. Super sedes 233296. For models D10, D12, D14, D15, D17. (Part No: 70237136)$21.00 [Show Picture]

Solenoid, 12 Volt - Starter solenoid, diesel, 12-volt. For models 180, 185, 190, 200, 7000, 7020, D17. Replaces Delco #1115510 or OEM #'s 1028587M91, 159711AS, 65479C2 and R11292. (Part No: 70243828)$28.74 [Show Picture]

Solenoid, 12 Volt - Starter solenoid, 12-volt. Services Allis starter 273902 Lucas starter 26363, Allis starter 256898 Lucas starter 26435. For 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010 (Part No: 70272330)$50.09 [Show Picture]

Solenoid, 12 Volt - Starter solenoid. For models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. (Part No: 910687)$21.70

Solenoid, 12 Volt - Starter solenoid. For model D15 diesel. (Part No: 910703)$28.18

Solenoid, 12 Volt - Starter solenoid. For models (D17 diesel using Delco 1113082), (180, 185, 190 all diesel using Delco starter except 1107859), (190XT, 200, 7000, 7010, 7020 all with diesel engines and Delco starters). (Part No: 581959)$36.21

Solenoid, 12 Volt - Starter solenoid. For models (160, 170, 175 diesels using Delco starter), (170, 180 gas using starter 1107356), (180, 185, 190 diesels using 1107859 starter), (190, 190XT gas using Delco starters). (Part No: 25510)$28.78

Solenoid, 12 Volt - Starter solenoid. For models 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010 all using Lucas starters 26363, 26435 or AC starter 256898. (Part No: 608869)$42.94

Solenoid, 12 Volt - Starter solenoid. For models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 all using Delco starters 1114142, 1113419, 1113657. (Part No: 608844)$60.48

Solenoid, 12 Volt - Starter solenoid. For models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 all using Nippondenso starters 028000-3290, 028000-3930, 028000-3970, 028000-4930. (Part No: 603068)$55.67

Solenoid, 6 Volt - Starter solenoid. For models D10, D12, D14, D15 all with gas engines. (Part No: 581744)$28.45

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor high performance electronic ignition conversion kits. (Part No: S.66442)$14.48 [Show Picture]

Spark Plug Wire Set, Custom - For models (WD, WD45 with distributor), D10, D12, D14, D15, D17. (Part No: S.65034)$24.12 [Show Picture]

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)$20.02 [Show Picture]

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)$18.12 [Show Picture]

Start SW Cable - Starter to switch. For models D17, D19. (Part No: 70229490)$20.28

Starter - Remanufactured assembly for 6 volt systems (1950-1958). For models B, C, CA. Refundable $60.00 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: S14035)$214.80

Starter - 12 volt, 10 tooth, clockwise rotation. For models (8010 1982-1985 with 301 diesel), (180 1968-1973 with 301 diesel), (185 1970-1981 with 301 diesel), (200 1972-1975 with 301 diesel), (6060 1980-1984 with 200 diesel), (6070 1984-1985 with 200 diesel), (6080 1980-1986 with 200 diesel), (840, 940 1970-1983 with 433 or 649 diesel). Replaces 26363, 27518. (Part No: SLU0010)$151.93 [Show Picture]

Starter - 24 volt, 11 tooth, clockwise rotation. For model : T16 sugar babe 1962-1964 with 7000 diesel & 1965 with 3500 diesel. Replaces 1113855, 1113916, 1113900, 1113895, 1113898. (Part No: SDR0017)$244.33 [Show Picture]

Starter - 12 volt, 12 tooth, clockwise rotation. For models (7030, 7050 1974 with 6-426 diesel), (7040 1975-1977 with 6-426 diesel), (7045, 7060, 7080 1978-1981 with 6-426 diesel), (4580 1977-1981 with 6-426 diesel), (8030, 8050, 8070 1982-1985 with 6-426 diesel). Replaces 028000-4930. (Part No: SDR0054)$224.33 [Show Picture]

Starter - For models B, C both from 1942-1950 with autolite starter. (Part No: MAW4031)$284.78

Starter - For models B, C both from 1944-1956 with Delco starter. (Part No: 1107043)$268.18

Starter - For models D10, D12, D14 all from 1957-1960 with gas engines. Additional $35 core charge will be added to your order. Call for availability. Replaces 1107474. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1107466)$384.00

Starter - For model D15 from 1960-1963 with diesel engine. Call for availability. (Part No: 1107502)$477.65

Starter - For models CA 1950-58, B 1957-58 B. REBUILT Starter. 6 Volt, CCW, 14 teeth. $60.00 Refundable Core Charge. (Part No: 1107096)$280.29

Starter - For (D14, D15 Gas, both 1959-68), (H3 Crawler Gas 1960-69). REBUILT Starter with drive, 12 Volt. There is a refundble $60.00 Core Charge for this starter. (Part No: 1107758)$212.09

Starter - For models TL 545 Gas Loader 1965, D21 Gas 1967-68, 180 1964-72, 190 and 190XT both with Gas 1965. REBUILT Starter. 12 Volt. No exchange. Replaces 1108416. (Part No: 1107356)$181.88

Starter - For models 170 Diesel Combines 1967-72, 248 Diesel 1975-78, 170 Diesel 1967-74, 175 Diesel 1967-80. Refundable $60 core charge will be added to your order. (Part No: 1107859)$245.92

Starter Assembly, Diesel Engine - New Lucas style 12V starter assembly with solenoid (Replaces 273902), for tractors: 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010. With diesel engines. (Part No: 70273901)$205.85 [Show Picture]

Starter Drive - Remanufactured Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) D17, D19 (models 1959 & later using 1107235 or 1107695) (Part No: 70231310)$56.52 [Show Picture]

Starter Drive - Starter drive, gas, remanufactured. Used on Allis starter #0242136. To SN# 17000. For models 180, 190, 190XT, G. (Part No: 70243856)$40.50 [Show Picture]

Starter Drive - Remanufactured Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) D17 (uo to SN# 38963 with diesel engine) - 170, 180, 185, 190, 190XT, 200, 7000 (Part No: 70252044)$37.68 [Show Picture]

Starter Drive - Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) D10, D12, D14, D15 (models 1961 & later using Delco 1107265 or 1107758). (Part No: 70233295)$71.15

Starter Drive - 9 tooth. For models WD, WD45. (Part No: 1107213)$78.23

Starter Drive - For models D17, D19 both built prior to 1960 with diesel engines and starter 1113082 or 1113657. (Part No: 567891)$51.12

Starter Drive - For models D17, D19 both built 1961 and later with diesel engines and using 1113152 starter. (Part No: 566570)$99.25

Starter Drive - 9 tooth. For models D21, 210, 220 used with starters 1114117, 1114142. (Part No: 567925)$43.93

Starter Drive - For models 8010, 8030, 8050, 8070 all using starter 1113229, 1113419. (Part No: 567917)$65.49

Starter Drive - For models D10 SN# above 3501, D12, D14, D15. Starter Drive. (Part No: 1950398-R)$59.20 [Show Picture]

Starter Drive - For D17 with Diesel engine SN# up to 38964, (F, G, L all combine with Diesel Engine), (180, 185, 190, 190XT all with Diesel Engine. Starter Drive. 10 Teeth. (Part No: 1941157)$30.55 [Show Picture]

Starter Drive - Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) B, C, CA (models for 1940-1958 using starter 1107043 or 1107096 and auto-lite MAW4031) (Part No: 1880651)$52.89 [Show Picture]

Starter Drive - Fits WC, WD, WD45, D10, D12, D14 and G, 6 volt Replaces OEM# 1109605, 1109614, 1107017, 1107951, 1107474, 1107466, 1107962. (Part No: 565549)$36.52

Starter Drive - Remanufactured Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) WC, WF, WD, WD45 (models using Delco 1107017 or 1107951) - D10, D12, D14 (models for 1957-1960 using Delco 107474 or 1107466). Replaces 1868804. (Part No: 565549)$36.52

Starter Drive Housing - For models B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14. All with Delco starters 1107466, 1107006, 1107017, 1107024, 110743, 1107044, 1107045, 1107046, 1107096 or 1107951. (Part No: 1879156)$69.45

Starter Remanufactured - Starter assembly for 12 volt systems (1959-1964). For D14, D15. A Refundable $60.00 Core Charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: S14173)$222.19

Starter Remanufactured - Starter assembly for 6 volt systems. For WD, WD45. There is a refundable $60.00 Core Charge for this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: S14364)$219.90

Starter Repair Kit - Starter repair kit for starter 1107017. Contains all parts needed for overhaul. For WC, WF (Part No: SRK108)$9.14 [Show Picture]

Starter Repair Kit - Starter Repair Kit. Tractors: WD, WD45. For starter 1107951. (Part No: SRK110)$9.14 [Show Picture]

Starter Rod - For model G. Length 21 3 4 inches. (Part No: 800110)$24.95

Starter Solenoid, 12 Volt - For models 9630, 9650, 9735, 9745. (Part No: 72163342)$39.43

Starter Switch - Manual foot switch. For models B, C, CA, G, RC, (WC SN# 74330 and up), WD, WD45, (WF SN# 1904 and up). Replaces 70226128, 70217292, 70226126. (Part No: 1925781)$10.08 [Show Picture]

Starter Switch with Cold Start - For 5040, 5050. Starter Switch with COLD START. Also replaces 72089444, TX10954. *** NIS 02 15 07 NO DUE DATE *** (Part No: 677481A)$62.09

Starter, 12 Volt, Rebuilt - For model WD with gas engine. Additional $35 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1204296)$360.47

Starter, 6 Volt, Rebuilt - 10 tooth. For models WD, WD45 Gas, both 1948-55. REBUILT Starter. 6 Volt. There is also a $60.00 core charge. (Part No: 1107951)$230.72

Starter, Autolite, Rebuilt - For models WD, WH both from 1948-1951 with Autolite starter. Call for availability. (Part No: MCL6104)$293.79

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)$14.40 [Show Picture]

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)$14.40 [Show Picture]

Starter, Marelli - 12 volt, clockwise rotation, 9 teeth. For model 5040. (Part No: TX12433R)$237.22

Starter, New - 12 volt, clockwise rotation, 9 teeth. For model 6240. (Part No: 1163669)$173.05

Starter, New - 12 volt, 9 teeth, clockwise rotation. For models F, F2, G, K, K2, L, M, M2. (Part No: S-1171)$105.73

Starter, Rebuilt - For models WC, WF both from 1942-1985 with Autolite starter. (Part No: MAW4030)$170.62

Starter, Rebuilt - For models WC, WF 1944-1950 with Delco starter. Replaces 1107006. (Part No: 1107017)$234.81

Starter, Rebuilt - For model WD45 from 1954-1956 with diesel engine. Replaces 1113035. (Part No: 1108998)$341.77

Starter, Rebuilt - For models D17, 170 both from 1957-1972 with gas engines. (Part No: 1107695)$290.80

Starter, Rebuilt - For model D19 from 1961-1965 with gas engine. Additional $35 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1107235)$311.31

Starter, Rebuilt - For models D21, 210 both from 1963-1969 with diesel engines. Replaces 1114117. (Part No: 1114142)$265.66

Starter, Rebuilt - For models 180, 185, 190, 190XT all with diesel engines and Delco starter. (Part No: 1113657)$312.36

Starter, Rebuilt - For model 7050 diesel with Delco starter. (Part No: 1113412)$290.85

Starter, Rebuilt - For models (7040 with 3500 engine), (7580, 8030, 8050, 8070, 670, 7040, 7060, 7080, 7580 all from 1979-1982 with diesel engines). (Part No: 1113419)$252.27

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)$25.95

Switch - Starting switch, momentary push button type with cap and nut. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, D17, D19 (Part No: 70253322)$13.58 [Show Picture]

Tune Kit - Kit, with preassembled points, for Delco distributor with screw held cap. For 170, 190, F, K (Part No: ATK10DSR)$14.18 [Show Picture]

Tune Up Kit - for 4 Cylinder Gas Engines. Includes Spark Plugs, Points, Condenser and Rotor. For AC tractors using 14mm, 3 8" reach, 13 16" hex spark plug. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco distributor # 112688. (Part No: ACTK1)$25.46 [Show Picture]

Voltage Cutout 6 Volt - With cutout. For models B, C, CA, WC, WD, WD45, WF. (Part No: 574459)$39.03 [Show Picture]

Voltage Reducer with Bracket - 12 volt to 6 volt. (Part No: S.52671)$15.76 [Show Picture]

Voltage Regulator - 12-volt, using Delco generator 1100305 (VR1817). Also gas or diesel using Delco generators 1100345, 1100426. For D10, D12, D14, D15, D17, D19 (Part No: 70229484)$34.14 [Show Picture]

Voltage Regulator - Voltage regulator, 12-volt. For 170, 180, 190, D21 (Part No: 70243986)$27.88

Voltage Regulator - For model 5040. Replaces 72093853 (Part No: S.67989)$29.99

Voltage Regulator, 12 Volt - For model D19 with gas engine SN# up to 14698. (Part No: 220484)$38.99 [Show Picture]

Voltage Regulator, 12 Volt - 4 Post. For models D15, WD, WD45 all with diesel engines. Replaces 110327, 1100322, 1100994. (Part No: 568816)$42.75

Voltage Regulator, 12 Volt - For models D21, 190XT, 160, 170, 175, 180, 185, 190, 200. Replaces 1100822, 1100710. (Part No: 581710)$33.56

Voltage Regulator, 6 Volt - For models B, C, CA, IB, WC, WD, WD45, WF. (Part No: 74514722)$38.98 [Show Picture]

Voltage Regulator, 6 Volt, Positive Ground - For tractors using Delco generator 1100025 (VR1814). For D10, D12, D14. Replaces 70228365. (Part No: GDR6003)$24.95 [Show Picture]

WIRING HARNESS, MAIN - Main wiring harness for DEUTZ AC models: 5045, 5050. (Part No: 72091825)$112.25

Wire Harness, Main - For WD and WD45. Cloth covered harness is manufactured to restoration standards. Main harness does not cover light, accesories, etc. (Part No: 222532)$89.10 [Show Picture]

Wiring Harness, Complete - Includes engine harness, light harness, instructions and cutout relay. For model B up to SN# 13778. (Part No: 600458)$230.94

Wiring Harness, Complete - Includes engine harness, light harness, instructions, and cutout relay. For model B after SN# 13779. (Part No: 600459)$230.94

Wiring Harness, Complete - Includes engine harness, light harness, instructions. For Tractor systems with a cutout relay. For models WD, WD45 both with gas engines. (Part No: 600460)$220.38

Wiring Harness, Complete - Restoration quality. Includes engine harness, light harness, instructions, and cutout relay. For models RC, WC, WF with cutout relay. (Part No: 600462)$168.50 [Show Picture]

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For models B, C, CA. (Part No: 225591)$78.50 [Show Picture]

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For model G. (Part No: 800136)$38.21 [Show Picture]

 
Engine Bearings
Cam Bearing - Cam Bearings. Center. Overbore 4-1 8. For model D17. (Part No: 70229952)$41.46

Cam Bearing Set - Complete set (front and rear are one size, center is different size...all included in this set. Please check before ordering. For D10, D12, D14, D15 with 138 CID and 149 CID 4 cylinder gas engines (Part No: SH-505S)$36.00

Cam Bearing Set - For models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Part No: 811588)$95.10

Cam Bearing Set - For models 180, 185, 190XT, 200, 7000, 7010, 7020 all with gas or diesel engines. (Part No: 811216)$55.67

Cam Bearing, Gas Engine - 3 Required. For W, WC, WF, W25, WD, all with 201 CID 4 cylinder Gas Engine. For WD45 and D17 with 226 CID 4 cylinder Gas Engine. Sold Each. Order 3 for complete Bearing set. (Part No: 70229953)$38.72

Cam Bearing, Set - For tractors: D15 Diesel, D17 Diesel, WD45 Diesel, D19 gas & diesel. (Part No: 74514023)$38.99

Cam Bearing, Set of 3 - Fits 125, 138, 149 CID gas engines in Models: B, B15, IB, C, CA, 60H, RC all with B125 CID 4 cylinder gas engines.``Also Engines 134 & 149 CID: D10 w ESN <3501, D12 w ESN 3001>, D14, D15 except Series II w ESN 9001>``Replaces 70230795. Note: All three cam bearings are the SAME size diameter. Please check before ordering. (Part No: 70209130)$26.50

Cam Bushing Set - For models (6060, 6080 with D2200 diesel), (801 Cotton Picker, 860, 180, 185, 190, with 301 CID diesel 2800 series eng.), (TL-345B, TL-545, 545, 190, 190XT, 190XT III, 200, 7000, with 301 CID diesel 2900 series eng.), 7010, 7020, 8010. Replaces 74025025, 74025238. (Part No: CB2800)$36.90

Main Bearing Set - Bearing Kit..010, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For tractors: D15. For 220 (Part No: MBK-D15D5-010)$119.77

Main Bearing Set - Bearing Kit..020, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For tractors: D15. (Part No: MBK-D15D5-020)$138.12

Main Bearing Set - Main Bearing Kit. {standard} for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45 (Part No: MBKA3011)$153.99

Main Bearing Set - Main Bearing Kit..010, for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45 (Part No: MBKA3011-010)$177.09

Main Bearing Set - Main Bearing Kit..020, for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45 (Part No: MBKA3011-020)$181.79

Main Bearing Set - For B, IB, C, CA, RC with gas engines. Available in standard, .010 or .020 - specify size when ordering. (Part No: 70209867)$98.63

Main Bearing Set - For D15 with 4-cylinder diesel D175 engine. Available in standard, .010 or .020. Specify size when ordering. (Part No: MBK-D15D5)$119.77

Main Bearing Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Main Bearing Set (3). Available in standard, .010, .020, .030 (Part No: 2080078)$20.35

Main Bearing Set - For models 180, 185, 190, all with 2800 Series Engine. For models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. Available in standard and .010. (Part No: MBK190XT)$152.21

Main Bearing Set - With Thrust Bearings for G with Continental N-62. Main Bearing Set for 1 engine. Available in Std, .010, .020, .030 please tell us what size you want in the comments section. (Part No: MS-256C)$98.39 [Show Picture]

Main Bearing Set - Available in STD, .010, .020, .030 For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Specify size in Comments box when ordering. (Part No: MS-2002P)$170.80

Main Bearing Set .030 - Available in .030. For models B, C, CA, CB, CE, IB, RC. (Part No: MS-211P-030)$107.68

Main Bearing Set, .010 - Main Bearing Kit .010 undersize. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 220 (Part No: MBK-A426-010)$231.89

Main Bearing Set, .010 - Main bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: MBK-D10G-010)$151.12 [Show Picture]

Main Bearing Set, .020 - Main Bearing Kit .020 undersize. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 220 (Part No: MBK-A426-020)$231.89

Main Bearing Set, .020 - Main bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: MBK-D10G-020)$147.68 [Show Picture]

Main Bearing Set, .030 - Main bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: MS-902AL-030)$211.22 [Show Picture]

Main Bearing Set, 201 CID Gas, .010 - For models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas.(2.43" journal) Size is .010. This is 1 complete set for engine. (Part No: 70228620-010)$118.38

Main Bearing Set, 201 CID Gas, .020 - For models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas.(2.43" journal) Size is .020. This is 1 complete set for engine. (Part No: 70228620-020)$111.05

Main Bearing Set, 201 CID Gas, .030 - For models W25, WC, WD, WD45, WF. Engine: 201 CID Gas.(2.43" journal) Size is .030. This is 1 complete set for engine. (Part No: 70228830)$110.28

Main Bearing Set, 201 CID Gas, STD - For models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas.(2.43" journal) Size is STD. This is 1 complete set for engine. (Part No: 70228620)$129.92

Main Bearing Set, 226 Gas, .010 - .010". For models D17, 170 with G226 gas engine. (Part No: MBK-D17-010)$96.48

Main Bearing Set, 226 Gas, .020 - .020". For models D17, 170 with G226 gas engine. (Part No: MBK-D17-020)$105.35

Main Bearing Set, 226 Gas, STD - Standard size. For models D17, 170 with G226 gas engine. (Part No: MBK-D17)$104.27

Main Bearing Set, 262 Diesel, .010 - Main Bearing Kit..010", 3-9 16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. For models D17, WD45 (Part No: MBK-D17D7-010)$156.09

Main Bearing Set, 262 Diesel, .020 - Main Bearing Kit..020", 3-9 16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. For models D17, WD45. (Part No: MBK-D17D7-020)$128.09

Main Bearing Set, 262 Diesel, STD - Main Bearing Kit. Std. kit. 3-9 16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. For models D17, WD45. (Part No: MBK-D17D7)$156.09

Main Bearing Set, Std - Main Bearing Kit. {standard}. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: MBK-A426)$248.32

Main Bearing Set, Std - Main bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: MBK-D10G)$150.86 [Show Picture]

Rod Bearing - For G with Continental N-62. FOR ANGLE SPLIT RODS. Rod Bearing Pair. 4 Required per Engine. Available in Standard, .010, .020, .030. State size in comments section of Order Form. (rtp) (Part No: CB-524P)$50.35

Rod Bearing Pair - For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. Rod Bearing pair, 4 required per engine. Available in Standard, .010, .020, .030. Specify size required in comments section of order form. .060 available for an additional charge. Call for current price. 4 REQUIRED FOR ENGINE. (Part No: CB-345P)$20.79

Rod Bearing Pair, .010 - Individual connecting rod bearings .010, For tractors: B, 1B, C, CA, RC. (Part No: 223629-010)$23.72

Rod Bearing Pair, .020 - Individual connecting rod bearings .020, For tractors: B, 1B, C, CA, RC. (Part No: 223629-020)$23.72

Rod Bearing Pair, .030 or .060 - Single rod bearing (4 required). For models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Available in .030 or .060. Please specify size in comments section when ordering. (Part No: CB-179P)$22.90

Rod Bearing Pair, STD - Individual connecting rod bearings. Standard, For models B, 1B, C, CA, RC. (Part No: 223629)$25.92

Rod Bearing Set - Internal Engine Parts. Standard rod bearing kit. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426)$104.90

Rod Bearing Set - Internal Engine Parts. Kit.010 undersize. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426-010)$104.90

Rod Bearing Set - Internal Engine Parts. Kit.020 undersize. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426-020)$104.90

Rod Bearing Set - Rod Bearing Kit. Std. size, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For model D15. (Part No: CRK-D15D4)$59.83

Rod Bearing Set - Rod Bearing Kit..002, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For tractors: D15. (Part No: CRK-D15D4-002)$58.06

Rod Bearing Set - Rod Bearing Kit..010, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For tractors: D15. (Part No: CRK-D15D4-010)$59.83

Rod Bearing Set - Rod Bearing Kit..020, 175 CID, 4 cylinder diesel engines, 3-9 16 Std. bore. For tractors: D15. (Part No: CRK-D15D4-020)$59.83

Rod Bearing Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Connecting Rod Bearing Set (3). Available in standard, .010, .020, .030 (Part No: 72080082)$16.01

Rod Bearing Set - For models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series Engine. All with 301 CID 6 cylinder. Connecting Rod Bearing Set (3). Available in standard, .010 and.020. (Part No: CRK190XT)$69.28 [Show Picture]

Rod Bearing Set - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Connecting Rod Bearing Set (6). Available in Standard, .010 undersize, .020. Specify desired size in comments section of order form. (Part No: CRK-A426)$104.90

Rod Bearing Set 010 - AD3. 152 PERKINS For 160 (Part No: 737071M91)$16.52

Rod Bearing Set 020 - AD3. 152 PERKINS For 160 (Part No: 737072M91)$15.88

Rod Bearing Set 030 - AD3. 152 PERKINS For 160 (Part No: 737073M91)$13.44

Rod Bearing Set, .002 - Connecting rod bearing set..002", For models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-002)$87.10

Rod Bearing Set, .010 - Engine Bearing Kit For Gasoline Models..010 under. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC-010)$60.80

Rod Bearing Set, .010 - .010". For models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-010)$45.21

Rod Bearing Set, .010 - Connecting rod bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G-010)$49.29 [Show Picture]

Rod Bearing Set, .010 - Connecting rod bearing set..010", For models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-010)$90.37

Rod Bearing Set, .020 - Engine Bearing Kit For Gasoline Models..020 under. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC-020)$60.80

Rod Bearing Set, .020 - .020". For models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-020)$45.21

Rod Bearing Set, .020 - Connecting rod bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G-020)$61.79 [Show Picture]

Rod Bearing Set, .020 - Connecting rod bearing set..020", For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-020)$85.63

Rod Bearing Set, 152 Diesel, .010 - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 85036A)$9.83

Rod Bearing Set, 152 Diesel, .020 - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 85036B)$9.83

Rod Bearing Set, 152 Diesel, .030 - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 85036C)$9.83

Rod Bearing Set, 152 Diesel, Std - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 85036)$9.53

Rod Bearing Set, Standard - With Journals measuring 1.937 inches. Engine Bearing Kit For Gasoline Models. STANDARD Connecting rod bearing set. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC)$63.23

Rod Bearing Set, Standard - For models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW)$45.21

Rod Bearing Set, Standard - Standard, connecting rod bearing set. For models CA, WD45D, D17D, D19D with 6BD23 or DA262 6 cylinder engine. (Part No: CRK-D17D6)$88.75

Rod Bearing Set, Std - With Journals measuring 1.937 inches. Connecting rod bearing set. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G)$49.29 [Show Picture]

Rod Bearing, .002 - Single rod bearing. For model D15. (Part No: 74517332)$21.68

Rod Bearing, .010 - Individual connecting rod bearing. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802-010)$18.74 [Show Picture]

Rod Bearing, .010 - Single rod bearing. For model D15. (Part No: 74517333)$22.14 [Show Picture]

Rod Bearing, .020 - Individual connecting rod bearing. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802-020)$23.80 [Show Picture]

Rod Bearing, .020 - Single rod bearing. For model D15. (Part No: 74517334)$22.16 [Show Picture]

Rod Bearing, .030 - Individual connecting rod bearing. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CB-781AL-030)$20.42

Rod Bearing, .040 - Individual connecting rod bearing. For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CB-781AL-040)$25.26

Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings..010", For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-010)$16.84

Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings..020", For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-020)$18.42

Rod Bearing, 201 Gas, STD - Individual connecting rod bearings. Standard, For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Part No: 231125)$17.26

Rod Bearing, Std - Individual connecting rod bearing.For models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802)$18.74 [Show Picture]

Rod Bearing, Std - Single rod bearing. For model D15. (Part No: 74517331)$22.14 [Show Picture]

Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Part No: 70223619)$24.50

 
Engine Gaskets
Complete Gasket Set - Complete Overhaul Gasket Set for 125 CID 4-cyl gas engine. Does not include rear main crankshaft seal. For models B, C, CA, RC - Includes all gaskets for major engine overhaul. (Part No: 70226500)$68.46 [Show Picture]

Crankshaft Rear Main Seal - For G with Continental with N-62. (Part No: PC49910)$10.28 [Show Picture]

Crankshaft Rear Main Seal - With Press-on Oil Seal Retainer For D15 with 175 Diesel Engine (Part No: SS48048)$77.87

Crankshaft Rear Main Seal - With Press-on Oil Seal Retainer For D17 with 262 Diesel Engine. (Part No: SS48048)$77.87

Crankshaft Rear Main Seal - With Press-on Oil Seal Retainer For D19 with 262 Gas Engine. (Part No: SS48048)$77.87

Crankshaft Seal, Front - For models 170, 175, D17 with 226 CID gas engines. (Part No: 70229229)$22.68

Crankshaft Seal, Front - Seal O.D. is 2.01. If you need one that is 1.9375, you need part number 70225806 which we do not have. For models (60H, B, B15, C, CA, IB all with eng. SN# CE-177730 and up), W25, WC, WD, WF. (Part No: 70224929)$11.31

Engine Gasket Set - For G with Continental N-62. Comes with crank seals. (Part No: FS1850)$73.37

Engine Overhaul Gasket Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Engine Overhaul Gasket Set. Does not include crankshaft thrust washers (72080086 upper, 2 per engine. And 72080088 lower. 2 per engine. - order seperately). (Part No: FSA160D)$61.76

Full Gasket Set - For W, WC, WD, WF all with 226 CID gas engine. Comes with crank seals. (Part No: FS3162)$112.74 [Show Picture]

Full Gasket Set - For WD45, D17, 170, 175 all with 226 CID gas engine. Comes with crank seals. (Part No: FS3162)$112.74 [Show Picture]

Full Gasket Set - With Bolt-on Oil Seal Retainer For WD45 with 230 Diesel Engine. (Part No: FS3293VW)$193.24

Full Gasket Set - With Press-on Rear Main Seal Retainer For WD45 with 230 Diesel Engine. (Part No: FS3293VC)$146.46

Full Gasket Set - For D15 (From S#9001) with 160 Gas Engine (Part No: FS3332)$96.36

Full Gasket Set - With Bolt-on Seal Oil Retainer. For models D15 with 175 Diesel Engine. (Part No: FS3303VW)$140.72

Full Gasket Set - With Press-on Oil Seal Retainer For D15 with 175 Diesel Engine (Part No: FS3303VC)$157.99

Full Gasket Set - With Bolt-on Oil Seal Retainer. For D17 with 262 Diesel Engine. (Part No: FS3293VW)$193.24

Full Gasket Set - With Press-on Rear Main Oil Seal Retainer For D17 with 262 Diesel Engine. (Part No: FS3293VC)$146.46

Full Gasket Set - With Press-on Oil Seal Retainer. For D19 with 262 Gas Engine. (Part No: FS3300VC)$278.24

Gasket Set - This is a complete gasket set with main bearing seals, where required. For D17 with engine serial number 113009 to 119937 (not for engine serial number 117087 to 117104). For 262 CID 6-cylinder diesel engine. (Part No: FS7805B2)$151.29

Gasket Set - Complete overhaul gasket kit. For D15 diesel, D175 engine. (Part No: FS7768B1)$216.76

Gasket Set, Complete - Complete gasket set. For D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engines. Replaces 70255326. (Part No: 70277265)$91.09 [Show Picture]

Gasket Set, Lower - For AD3.152 Perkins Diesel. (Part No: 72080588)$22.10

Gasket Set, Top - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: U5LT0038)$35.76

Gasket Set, Upper - Upper gasket set for B125 4 cylinder gas engines. For models B, B15, C, CA, IB. (Part No: 70224768)$40.41

Gasket, Head - For AD3.152 Perkins Diesel. (Part No: 72080358)$11.15

Head Gasket - For models IB, B, B125, B15, C, CA. (Part No: 70206893)$27.68

Head Gasket - Cylinder Head Gasket. For tractors: W, WC, WF, WD, WD45, D17, 170. All with gas engines. (Part No: 70229406)$41.53 [Show Picture]

Head Gasket Set - For models D10, D12, D14, D15 with 138, 149 or 160 CID 4 cylinder gas engines. Replaces 70277264. (Part No: 70255323)$43.13 [Show Picture]

Head Gasket Set - For GAS engine in: D17, W, W25, WC, WD, WD45, WF. Includes Upper gasket set with head gasket. (Part No: 70277286)$56.93 [Show Picture]

Head Gasket Set - For models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series Engine. All with 301 CID 6 cylinder. (Upper gasket set with head gasket). (Part No: VGK6894D)$117.23

Head Gasket Set - For models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Head Gasket set. (Part No: VGK9192)$148.57

Head Gasket Set - Upper Gasket Set For G with Continental N-62. Head Gasket. (rtp) (Part No: HS1850)$44.10

Head Gasket Set - For WD45 with 230 Diesel Engine (Part No: HS3293VC)$91.77

Head Gasket Set - For D15 (From S#9001) with 160 Gas Engine (Part No: HS3332)$39.09

Head Gasket Set - For D15 with 175 Diesel Engine (Part No: HS3303VC)$109.63

Head Gasket Set - For D17 with 262 Diesel Engine (Part No: HS3293VC)$91.77

Head Gasket Set - For model D19 with 262 Gas Engine. (Part No: HS3300VC)$88.16

Intake & Exhaust Manifold Gasket Set - For models D17 series III, WC, WD, WD45, all with gas engine. (Part No: 70229958)$19.86 [Show Picture]

Lower Gasket - Gasket Set. Lower gasket set with crankshaft seals. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CS9192)$316.22

Lower Gasket Set - No front or rear seal included For 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 (Part No: 51-5056)$164.77

Manifold Gasket - MANIFOLD GASKET For D10, D12, D14, D15 (Part No: 70234140)$12.44 [Show Picture]

Oil Pan Gasket - 6 piece pan gasket set. For 201 and 226 CID 4 cylinder gas engines on: W, WC, WF, W25, WD, WD45, D17, 170. (Part No: 70229860)$16.90 [Show Picture]

Oil Pan Gasket - Oil pan gasket. For tractors: B, 1B, C, CA, RC, D10, D12, D14, D15, gas. For D10, D12, D14, D15 (Part No: 70232325)$13.72 [Show Picture]

Pan Gasket Set - Gasket Set. Pan gasket only. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 262, D19, GLEAMER C (Part No: PS30534)$13.12

Push Rod Cover Gasket - For tractors: WD, WD45. Both with gas engines. (Part No: 70218604)$11.50 [Show Picture]

Rear Crank Seal - Rear Crankshaft Seal. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For 170, 180, 185, 190, D17, D19, D21 (Part No: BS219)$38.15

Rear Crankshaft Seal - For models B, C, CA with 125 CID gas. Replaces OEM #s 225805 & 70225805. (Part No: 311268)$16.00

Rear Main Seal - For models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. (Part No: SS64550)$49.29

Rear Main Seal - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine (Part No: SS47882)$62.17

Rocker Arm Gasket - For models D10, D12, D14, D15. (Part No: 70255296)$22.02 [Show Picture]

Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019)$7.10 [Show Picture]

Seal, Front - FOR AD3. 152 Perkins diesel. Models: 160, 715B E SN# U106655N and up, 840, D175. (Part No: 2418F436)$10.72

Seal, Front Crank - For model 160. (Part No: 72080166)$17.79

Seal, Rear Main - FOR AD3. 152 Perkins diesel. 5.394" X 6.260" X.433", lip type seal, both rear seal types included in kit. (Part No: 303158411)$17.10

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)$7.14 [Show Picture]

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)$7.86 [Show Picture]

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)$11.78 [Show Picture]

Valve Cover Gasket - Valve Cover Gasket. Rocker Cover. For tractors: B, C, CA, RC. Must be ordered in mulitples of 2. (Part No: 70206892)$11.30 [Show Picture]

Valve Cover Gasket - GASKET. For models D17, W, W25, WC, WD, WD45, WF. All with gas engines. (Part No: 70255297)$17.62 [Show Picture]

Valve, Seals - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. ** Sold in qty of 6, priced each. ** (Part No: 33817117)$1.78

 
Engine Overhaul Kits
Basic Engine Kit - Made by TISCO. Tru Power Engine Kit 4-Cylinder Gas, 125 CID. 3-3 8" Standard Bore, 3-7 16" Overbore Supplied. Basic Engine Kit, less bearings. Contains sleeves, pistons & rings, pins, overhaul gasket set. For models B, IB, C, CA, B125 (Part No: BEKA1122-LCB)$344.90

Basic Engine Kit - Made by TISCO. For D10, D12, D14, D15 (except Series II SN# 9001 & up). With 138 or 149 CID 4-cylinder gas engines. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1127-LCB)$346.55

Basic Engine Kit - Made by TISCO. For W, WC, WF, W25, WD with 201 CID 4-cylinder gas enine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1120-LCB)$481.76

Basic Engine Kit - Made by TISCO. For WD45 with 226 CID 4-cylinder 4 1 8 overbore gas engine. This basic kit contains a sleeve and dished piston kit with rings, pins, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1121-LCB)$543.75

Basic Engine Kit - Made by TISCO. For D17 with 226 CID 4-cylinder 4 1 8 overbore gas engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1121A-LCB)$498.23

Basic Engine Kit - Made by TISCO. For D15 to engine serial number 119504 with 175 CID 4-cylinder diesel engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1128-LCB)$768.22

Basic Engine Kit - Made by TISCO. For D17 with engine serial number 113009 to 119937 (not for eng. SN# 117087 to 117104) with 262 CID 6-cylinder diesel engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1123-LCB)$1077.22

Basic In-Frame Overhaul Kit - Made by TISCO. Basic in-frame kit for 201 CID 4 cylinder gas engine, overbore from 4" to 4-1 8". Contains: PK120 sleeve and piston kit with rings and pins, 70277286 upper gasket set with head gasket, 70229860 oil pan gasket kit. For W, W25, WC, WD, WF (Part No: BIFA1120)$441.29

Basic In-Frame Overhaul Kit - Made by TISCO. Basic in-frame kit for 226 CID 4 cylinder gas engine. Overbore 4 1 8 Contains: PK121 sleeve and piston kit with rings and pins, 70277286 valve grind gasket set, 70229860 oil pan gasket kit. For D17, WD45 (Part No: BIFA1121)$442.08

Basic In-Frame Overhaul Kit - Made by TISCO. Tru Power Engine Kit. 4-Cylinder Gas, 125 CID. 3-3 8" Standard Bore, 3-7 16" Overbore Supplied. Basic In-Frame Kit. Contains sleeves, pistons & rings, pins, valve-grind gasket set, oil pan gasket. For models IB, B, B125, B15, C, CA. (Part No: BIFA1122)$370.74

Basic In-Frame Overhaul Kit - Made by TISCO. Basic in-frame kit for 138 & 149 CID 4 cylinder gas engine, except series II SN# 9001 & up. Contains: PK127 sleeve and piston kit with rings and pins, 70277286 valve grind gasket set, 70232325 oil pan gasket kit. For D10, D12, D14, D15. (Part No: BIFA1127)$292.76

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit with Standard Bearings. For 301 CID 6 cylinder~ 3-7 8 Std. bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeves, pistons & rings, pins & retainers, pin bushings, rod bearings, main bearings and gasket set. For models 180, 185, 190, 190XT. (Part No: BEKA1190XT)$1305.82

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit. For 301 CID 6 cylinder~ 3-7 8 Std. bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeves, pistons & rings, pins & retainers, pin bushings & gasket set. For models 180, 185, 190, 190XT. (Part No: BEKA1190XT-LCB)$974.59

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit with Standard Bearings. For 301 CID 6 cylinder, 2900 Series Diesel engine. 3-7 8 standard bore, 30 degree exhaust valve face angle. Kit contains: sleeves, pistons & rings, pins & retainers, pin bushings, standard size rod & main bearing For 200, 7000 (Part No: BEKA3010)$1349.41

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. Kit contains: sleeves, pistons & rings, pins & retainers, pin bushings & gasket sets. For tractors: 7010, 7020, 8010. For 200, 7000 (Part No: BEKA3010-LCB)$1231.06

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit with Standard Bearings. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. Kit contains: sleeves, pistons & rings, pins & retainers, pin bushings, standard size rod & main bearing For 7010, 7020, 8010 (Part No: BEKA3011)$1052.71

Basic Overhaul Kit - Made by TISCO. Basic Engine Kit with Standard Bearings. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. Contains: sleeves, pistons & rings, pins & retainers, pin bushings, gasket sets with crankshaft seals & wear sleeve. For tractors: D21, 7010, 7020, 8010 (Part No: BEKA426-LCB)$1438.73

Cylinder Head Valve Overhaul - Made by TISCO. For 180, 185, 190, all with 2800 series engine. For 190XT, 200, 700, all with 2900 series engine. For 7010, 7020, 8010, all with 649l-649T series engine. 6 cylinder 301 CID. Contains intake & exhaust valves, springs, guides and retainers. (Part No: VOKA301)$358.34 [Show Picture]

Cylinder Head Valve Overhaul - Made by TISCO. For D21, D210, D220, all SN# 3D16241 and up. For 7030, 7040, 7045, 7050, 7060, 7080, 7580, all with D3400 & D3500 Non Mark II engine. 6 cylinder 426 CID. (Part No: VOKA426)$415.35 [Show Picture]

Cylinder Head Valve Overhaul Kit - Made by TISCO. Contains intake & exhaust valves, springs, guides and retainers. For models W, WC, WF, W25, WD (with 4-cyl 201 CID gas engines) and WD45 (with 4-cyl 226 CID gas engine). (Part No: VOKA201)$168.01 [Show Picture]

Cylinder Head Valve Overhaul Kit - Made by TISCO. Contains intake & exhaust valves, springs, guides and retainers. For D17 with 4-cyl gas 226 CID engine. (Part No: VOKA226)$147.77 [Show Picture]

Cylinder Head Valve Overhaul Kit - Made by TISCO. Contains intake & exhaust valves, springs, guides and retainers. For D15 to engine serial number 119504 with 4-cylinder diesel 175 CID engine. (Part No: VOKA175)$409.94 [Show Picture]

Cylinder Head Valve Overhaul Kit - Made by TISCO. Contains intake & exhaust valves, springs, guides and retainers. For model D17 with engine serial number 113009 to 119937. Not for engine serial number 117087 to 117104. For 6-cylinder diesel engine 262 CID. (Part No: VOKA262)$604.46 [Show Picture]

Cylinder Head Valve Overhaul Kit - Made by TISCO. For model 160, 3 cylinder Perkins AD3-152. Contains intake & exhaust valves, springs, guides and retainers. (Part No: VOKA152)$75.32 [Show Picture]

Engine Major Overhaul Kit - Made by TISCO. For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D3400 & D3500 Non Mark II Diesel Engine, all for 426 CID Diesel, 426 CID 6 Cylinder. Engine Major Overhaul Kit includes: Piston Liner Kit, Pistons & Rings, Main Bearing Set, Thrust Washers, Conn Rod Bearing Set, Complete Gasket Set. Note Bearing Size of Standard, .010 or .020. (Part No: OK111)$1870.74

Engine Overhaul Kit - Made by TISCO. For AC D10 to SN# 3500, D12 to SN# 3000, D14 (138 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 3-3 8" to 3-9 16"). Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. Also available without bearings as EOK1127-LCB. (Part No: EOK1127)$654.24 [Show Picture]

Engine Overhaul Kit - Made by TISCO. For AC W, WC, WF, W25, WD (201 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4" to 4-1 8"). Complete Gasket Set with main bearing seals where required. Cam Bearings. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. Kit also available without bearings as EOK1120-LCB. (Part No: EOK1120)$680.10 [Show Picture]

Engine Overhaul Kit - Made by TISCO. For AC WD45 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4" to 4-1 8"). Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Cam Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. (Part No: EOK1121)$673.98 [Show Picture]

Engine Overhaul Kit - Made by TISCO. For AC D17 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4" to 4-1 8"). Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Cam Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. (Part No: EOK1121A)$693.66 [Show Picture]

Engine Overhaul Kit - Made by TISCO. For AC D17 Eng SN# 113009 to SN# 119937, not for Eng SN# 117087 to SN# 117104 (262 CID 6-cyl Diesel) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, standard bore 3-9 16"). Piston Pin Bushings. Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. Kit also available without bearings as EOK1123-LCB. (Part No: EOK1123)$1843.75 [Show Picture]

Engine Overhaul Kit - For D15 Series II with 160 CID Gas. Includes Pistons, Sleeves, Piston Pins, Pinston Pin Retainers, Overhaul Gasket Set, Main Bearing Set in Standard, .010, .020, or .030, Rod Bearing Set in Standard, .020, .020 or .030. State Bearing sizes needed in comment section of order form. (Part No: R4810-OHK)$1023.13

Engine Overhaul Kit - Made by TISCO. For AC 160 (AD3.152 Perkins 3-cyl Diesel) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, standard bore 3.6"). Piston Pin Bushings Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides. Does not come with Valve keys-order 731155M1 if needed.). Available with Std., .010 or .020 bearings. Kit also available without valves. (Part No: EOK1131)$367.50 [Show Picture]

Engine Overhaul Kit - Made by TISCO. For AC 180, 185, 190, with 2800 series engine. 190XT with 2900 series diesel engine (301 CID 6-cyl)Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, standard bore from 3-7 8"). Piston Pin Bushings. Valve Grinding Gasket Set. Lower Gasket Set. Crankshaft Seal. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. Valves are 30 Degree face angle. Replaces 4023379 older 45 degree exhaust valves. Requires replacement of seats. (Part No: EOK1190XT)$1661.54 [Show Picture]

Engine Overhaul Kit - Made by TISCO. Contains sleeve & piston kit, piston pin bushings, valve grinding set, lower gasket set, crankshaft seal, connecting rod bearing kit, main bearing kit and valve kit (intake & exhaust valves, springs and guides). Available with Standard, .010 or .020 bearings. For models 200 and 7000 with 2900 Series Diesel Engine, 301 CID 6-Cylinder. 3-7 8" standard bore, 30 degree exhaust valve face angle. Kit available without bearings as EOKA3010-LCB. (Part No: EOKA3010)$1702.21

Engine Overhaul Kit - Made by TISCO. Contains sleeve & piston kit, piston pin bushings, valve grinding set, lower gasket set, crankshaft seal, connecting rod bearing kit, main bearing kit and valve kit (intake & exhaust valves, springs and guides). Available with Standard, .010 or .020 bearings. For models 7010, 7020, 8010, 649I-649T Series Diesel Engine, 301 CID 6-Cylinder. 3-7 8" standard bore, 30 degree exhaust valve face angle. Kit also available without bearings as EOKA3011-LCB. (Part No: EOKA3011)$1233.11

Engine Overhaul Kit - Made by TISCO. For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. All with D3400 or D3500 Non Mark II Diesel Engine, 426 CID 6 Cylinder, 4 1 4" Bore. Engine Overhaul kit includes Sleeves, Pistons, Rings, Pins, Retainers, Pin Bushings, Rod Bearings, Main Bearings, Thrust Washers, Gaskets with Crankshaft Seals and Wear Sleeve. Bearings available in Standard, .010 and .020 undersize. (Part No: BEKA426)$1734.23

Engine Overhaul Kit - Less Bearings - Made by TISCO. For AC D17 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4 to 4-1-8). Cam Bearing Kit. Complete Gasket Set with main bearing seals where required. Valve Parts (intake & exhaust valves, springs, guides & keys). Engine bearings must be ordered separately. (Part No: EOK1121A-LCB)$589.99

Engine Overhaul Kit, Less Bearings - Made by TISCO. For AC WD45 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4 to 4-1-8). Cam Bearing Kit. Complete Gasket Set with main bearing seals where required. Valve Parts (intake & exhaust valves, springs, guides & keys). Engine bearings must be ordered separately. (Part No: EOK1121-LCB)$541.80

Engine Rebore Kit - For AC G with N-62 engine. STANDARD. Contains Pistons, rings, pins, and clips. (Part No: R2488)$248.06 [Show Picture]

Engine Rebore Kit - For AC G with N-62 engine..020 oversize. Contains Pistons, rings, pins, and clips. (Part No: R2489)$248.06 [Show Picture]

Engine Rebore Kit - For AC G with N-62 engine..040 oversize. Contains Pistons, rings, pins, and clips (Part No: R2490)$248.06 [Show Picture]

Engine Rebore Kit, .060 - For model G with N-62 engine..060 oversize. Contains Pistons, rings, pins, and clips (Part No: R2328)$236.25 [Show Picture]

In-Frame Overhaul Kit - 4 1 8 Overbore For W, WC, WD, WF with G201 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3308-IFK)$528.84

In-Frame Overhaul Kit - 4 1 8 Overbore For WD45 with G226 Gas Engine with FRONT Thrust Bearing. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. *** Same as BEKA1121-LCB*** NOTE: Please specify FRONT THRUST BEARING in comments section on your order for this kit. (Part No: R1968-IFKA)$543.75

In-Frame Overhaul Kit - 4 1 8 Overbore For D17, 170, 175 with G226 Gas Engine with CENTER Thrust Bearing. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. ** NOTE: Please specify CENTER THRUST BEARING in comments section on your order for this kit. (Part No: R1968-IFKB)$543.75

In-Frame Overhaul Kit - 3 1 2 Overbore For WD45 with 230 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3315-IFK)$1139.06

In-Frame Overhaul Kit - 3 9 16 Bore For D10, D12, D14, D15 (To S#9000) with 138 or 149 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3306-IFK)$618.75

In-Frame Overhaul Kit - 3 9 16 Bore For D15 with 175 Diesel Engine to engine SN# 119504. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3307-IFK)$731.25

In-Frame Overhaul Kit - 3 9 16 Bore For D17 with 262 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3310-IFK)$1031.25

In-Frame Overhaul Kit - 3 7 8 Bore For 200, 7000, 7010, 7020 with 301 Turbo Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. Need to verify if oil holes in main bears are round or oval. State this in the comments section of the order form if ordering on-line. (Part No: R3317-IFK)$1101.00

In-Frame Overhaul Kit - 4 1 4 Bore with 1 1 2 Pin Diameter For D21, 210, 220, 7030, 7040, 7045, 7050, 7060 with 426 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3312-IFK)$1260.00

Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)$6.71 [Show Picture]

Overhaul Kit - Made by TISCO. Engine overhaul kit overbore of 4-1 8. Kit contains sleeve and piston kit, cam bearings, gasket set, intake valves, exhaust valves, springs, guides, and keys. For tractors: W, WC, WF, W25, WD. (Part No: EOK1120-LCB)$565.03 [Show Picture]

Overhaul Kit - Made by TISCO. Engine overhaul kit 3-9 16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. Kit contains sleeve and piston kit, bushings, gasket set, intake valves, exhaust valves, springs, guides, and keys. For tractors: D17. (Part No: EOK1123-LCB)$1629.01

Overhaul Kit - Made by TISCO. Except Series II tractor SN# 9001 & up For D10, D12, D14, D15. Kit includes: sleeves, pistons, rings, pins, overhaul gasket set, valves, springs, guides and keys. (Part No: EOK1127-LCB)$475.16

Overhaul Kit - Made by TISCO. Engine Overhaul Kit for 175 CID engine. 3-9 16 Std. bore. Kit contains: sleeve & pistons, bushings, cam bearings, gaskets, rod bearings, standard bearings, intake valve & exhaust valve, springs, guides & keys. For tractors: D15. For D10, D12, D14, D15 (Part No: EOK1128)$1289.33 [Show Picture]

Overhaul Kit - Made by TISCO. Engine Overhaul Kit for 175 CID engine. 3-9 16 Std. bore. Kit contains sleeve and piston kit, gasket set, cam bearings, intake valves, exhaust valves, bushings, springs and keys. For tractors: D15. For D10, D12, D14, D15 (Part No: EOK1128-LCB)$1136.08

Overhaul Kit - Made by TISCO. Engine Overhaul Kit for AD3. 152 Perkins 3 cylinder diesel engine. Std. overbore 3.6. Kit contains: sleeve & pistons, bushings, gaskets, washers, exhaust valves, intake valves, springs & guides (Does not come with Valve keys-order 731155M1 if needed.). For tractors: 160. For D10, D12, D14, D15 (Part No: EOK1131-LCB)$367.50

Overhaul Kit - Made by TISCO. Engine Overhaul Kit. For 301 CID 6 cylinder~ 3-7 8 Std. bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeve & piston kit, bushings, seals, & valves. For tractors: 180, 185, 190, 190XT. For D10, D12, D14, D15 (Part No: EOK1190XT-LCB)$1121.94

Overhaul Kit - Made by TISCO. Engine Overhaul Kit for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. Kit contains: sleeve & piston kit, bushings, seals, & valves. For tractors: 7010, 7020, 8010. For D10, D12, D14, D15 (Part No: EOKA3010-LCB)$1408.62

Overhaul Kit - Made by TISCO. Engine overhaul kit overbore of 3-7 16". 4 cylinder gas engine. Kit contains sleeve and piston kit, gasket set, standard rod bearings, standard main bearings, cam bearings, valves, springs, guides & keys. Also available with .010 or .020 bearings. For models AC B, IB, C, CA, B15, B125. Comes with front crank seal, does not come with rear crank seal. (Part No: EOK1122)$531.88 [Show Picture]

Overhaul Kit - 4 1 8 Overbore For W, WC, WD, WF with G201 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3308-OHK)$593.75

Overhaul Kit - 4 1 8 Overbore For D17, 170, 175 with G226 Gas Engine with Center Thrust Bearing. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R1968-OHKB)$549.35

Overhaul Kit - 3 1 2 Overbore For WD45 with 230 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3315-OHK)$1195.94

Overhaul Kit - 3 9 16 Bore For D10, D12, D14, D15 (To S#9000) with 138 or 149 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3306-OHK)$650.00

Overhaul Kit - 3 9 16 Bore For D15 with 175 Diesel Engine to engine SN# 119504. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3307-OHK)$812.50

Overhaul Kit - 3 9 16 Bore For D17 with 262 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3310-OHK)$1062.50

Overhaul Kit - 3 7 8 Bore. For models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3316-OHK)$1308.75

Overhaul Kit - 3 7 8 Bore. For models 200, 7000, 7010, 7020 with 301 Turbo Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. Need to verify if oil holes in main bears are round or oval. State this in the comments section of the order form if ordering on-line. (Part No: R3317-OHK)$1179.60

Overhaul Kit, Less Bearings - Made by TISCO. Tru Power Engine Kit. 4-Cylinder Gas, 125 CID. 3-3 8" Standard Bore, 3-7 16" Overbore Supplied. Engine Overhaul Kit. Contains sleeves, pistons & rings, pins, overhaul gasket set, cam bearings, valves, springs, guides, keys. Bearings NOT included must be purchased separately. For models B, IB, C, CA, B15, B125. Comes with front crank seal, does not come with rear crank seal. (Part No: EOK1122-LCB)$539.43

Rebore Kit - For AC G with N-62 engine..030 oversize. Contains Pistons, rings with Top Chrome Ring, pins, and clips (Part No: R2327)$236.25 [Show Picture]

Valve Kit - For G with N62 engine. Includes Intake Valves, Exhaust Valves, Valve Springs, guides & locks. (Part No: 1044247)$159.90 [Show Picture]

Valve Overhaul Kit - Made by TISCO. Contains intake & exhaust valves, springs, guides and keys. For models B, C, CA (4-cyl gas 125 CID or 160 CID engines), D10, D12, D14, D15 (4-cyl gas 138 & 149 CID engines) and D15 Series II (4-cyl gas 160 CID engine). (Part No: VOKA125)$153.64 [Show Picture]

Valve Service Kit - Cylinder HEAD Service KIT For IB, B, B125, B15, C, CA, D10, D12, D14, D15. Contains: springs, guides, locks, (no valves). (Part No: VSKA125)$44.87

Valve Train Kit - For AD3.152 Perkins Diesel. With engine SN# ending in D.Kit includes 3 intake valves, 3 exhaust valves, 8 valve guides, 6 valve springs, 8 valve locks. (Part No: VTK302)$62.45

Valve Train Overhaul Kit - For model D15 diesel with engine SN# <119504. VERIFY EXHAUST VALVE SIZE: HEAD DIA. 1.249, OVERALL LENGTH 4.438 INCHES. Contains: Intake and exhaust valves, springs, guides and keepers. (Part No: VTK174)$233.46

 
Engine Parts
Bolts, Conn Rod - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 32762144)$3.57

Bushing, Connecting Rod - FOR AD3. 152 Perkins diesel. (Part No: 31134151)$4.32 [Show Picture]

Camshaft - New for 210, 220, 4W220, 7030, 7040, 7045, 7050, 7060, 7080, 8580, 8030, 8050, 8070. (Part No: 74029000)$305.46

Camshaft Timing Gear - 54 tooth. For models 170, 175, D17, W201 all with gas engines, and (W226, WD45 gas eng. SN# 45-48556 and up). Replaces 70203923. (Part No: 70227038)$171.53

Camshaft, Reground - For models WD45 & D17 gas, early with 11 tooth drive gear. Casting # 227032. (Part No: R1189059)$151.47 [Show Picture]

Camshaft, Reground - For models WC, WD with casting # U3027 (Part No: R1189067)$151.47

Camshaft, Reground - For model D17 gas, late with 14 tooth, drive gear and casting number 232533. Refundable $25 core charge will be added to your order. (Part No: R1189042)$151.47

Camshaft, Reground - For models B, C, CA all with 3 4 inch hole and casting # 206973. There is a refundable $25.00 Core charge on this part. This will be added to your order. If ordering on-line, it will be added when your order is processed and will not show up on your internet order receipt. (Part No: R1189026)$151.47

Camshaft, Reground - For models D14, D15 both gas with 7 8" hole and casting # 206973. A Refundable $25 core charge will be added to your order after it has been processed and will not show up on the order confirmation page. (Part No: R1189034)$155.52

Camshaft, Reground - For model D15 diesel with casting # 4516048. Additional $50 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1189075)$224.10

Camshaft, Reground - For model D17, D19 both with diesel engines. Refundable $40 core charge will be added to your order. Please specify your casting # in comments section. (Part No: R1189091)$209.84

Camshaft, Reground - For model D19 with gas engine. Please specify your casting # in comments section. (Part No: R1189109)$191.13

Camshaft, Reground - For models D21 diesel with bolt on cam gear and oil pump drive gear. Please specify your casting # in comments section. (Part No: R1189158)$232.17

Camshaft, Reground - For models D21, 7060 both with press on cam gear and oil pump drive gear. Please specify your casting # in comments section. (Part No: R1189174)$212.93

Camshaft, Reground - For model G with casting # N621400. Additional $25 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. **Call for availability**. (Part No: R1189018)$177.17

Camshaft, Reground - For models WD45 diesel. Please specify your casting # in comments section. (Part No: R1189083)$227.61

Camshaft, Reground - For model 190 gas with press on oil pump gear and fuel pump lobe. Please specify your casting # in comments section. (Part No: R1189190)$152.86

Camshaft, Reground - For model 190XT with press on cam gear and oil pump drive gear. Please specify your casting # in comments section. (Part No: R1189125)$232.17

Camshaft, Reground - For models (190XT early), 200, 7000 with bolt on cam gear and oil pump drive gear. Refundable $25 core charge will be added to your order. Please specify your casting # in comments section. (Part No: R1189133)$232.17

Camshaft, Reground - For models 200, 7000, 7010, 7020 all with bolt on cam gear wihout oil pump drive gear. Please specify your casting # in comments section. (Part No: R1189141)$232.17

Connecting Rod - For model D15 late model with gas engine and casting # 237633. Aditional $10 core charge will be added to your order. (Part No: R1203496)$211.23

Connecting Rod - For model D17 late model with gas engine and casting # 232441. (Part No: R1203454)$101.99

Connecting Rod - For models (D19 gas or diesel), (WD45, D17 diesel) all with casting # 4500141. (Part No: R1201490)$99.00

Connecting Rod - For model 160 with casting # 31337220. (Part No: R1202068)$106.59

Connecting Rod - For models 180, 185, 190 all gas or diesel with casting # 4020888. (Part No: R1202381)$99.69

Connecting Rod - For models 200, 6060, 6080 diesel with casting # 4007878. (Part No: R1203470)$121.18

Connecting Rod - For models 7060, 7080 all diesel with casting # 4036181. (Part No: R1203702)$179.98

Connecting Rod - For models 8050, 8070 both diesel with casting # 4036541. (Part No: R1202423)$128.30

Connecting Rod, Reconditioned - For models B, C, CA. All with gas engines and oil hole. (Part No: 207459)$101.99 [Show Picture]

Connecting Rod, Reconditioned - For models WC, WD, WD45, (D17 - Early). All with gas engines. Must have casting number of U3988. (Part No: U3988)$101.99 [Show Picture]

Crankshaft Damper Pulley - For models 7000, 7010, 7020, 8010. Replaces 74007157. (Part No: 74009848)$466.65

Crankshaft Pulley - For model 200. (Part No: 74009853)$415.84

Crankshaft Pulley - 3 groove, 7.562" O.D.. For models 7030, 7040, 7045, 7050, 7060, 8030, 8050. Replaces 74028472. (Part No: 74037126)$457.77 [Show Picture]

Crankshaft Pulley - For models D10, D12, D14, D15. Bore is 1.125 inches for a keyed shaft, outside diameter is 5 inches, fits a 5 8 inch belt. (Part No: 70236741)$58.98 [Show Picture]

Crankshaft, Reground - Fits 226 CID Gas engine on WD45. ** Add Core of $100.00 ** NOTE: IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 226535)$527.94 [Show Picture]

Crankshaft, Reground - For models B, C, CA with casting # 207145 or 206638. (Part No: R1197896)$564.32

Crankshaft, Reground - For models D10, D12, D14, D15 all gas with casting #227550. Additional $50 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1197805)$615.26

Crankshaft, Reground - For models D17, 170 both gas with casting # 229022. (Part No: R1197904)$729.59

Crankshaft, Reground - For models D21, 210, 220 all diesel with casting # 4025479. Refundable $50 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1197813)$714.19

Crankshaft, Reground - For models WC, WD both gas with casting # U3986. (Part No: R1197888)$588.18

Crankshaft, Reground - For model 160 3 cylinder diesel with splined nose and rope type rear seal. Additional $60 core charge will be added to your order. Please specify your casting # in comments section. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1205582)$522.80

Crankshaft, Reground - For models 170, 175 diesel with splined nose and rope type rear seal. Please specify your casting # in comments section. Refundable $50 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1198332)$582.16

Crankshaft, Reground - For models 180, 185, 190XT all with 3.5" nose and casting # 4020345 or 4022256. Additional $50 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1198001)$896.19

Crankshaft, Reground - For models 180, 185, 200, 7000, 7010, 7020 all with 4" nose and casting # 4023823 or 4008146. Refundable $200 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1205467)$1036.80

Crankshaft, Timing Gear - 27 teeth, For models (D17, 170, 175, all gas), (W226, WD45 all gas eng. SN# 45-11050. I.D. is 1.625 inches. (Part No: 70230217)$129.77 [Show Picture]

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but does NOT come with valves. For models B, C, CA all gas with casting # AM2917. (Part No: R1193960)$374.53

Cylinder Head, Rebuilt - CYlinder head comes with seats and guides but NOT valves. For model D14 gas with casting # AM4367. (Part No: R1193952)$409.50

Cylinder Head, Rebuilt - Cylinder heads come with seats and guides but NOT valves. For model D15 gas with casting # AM5481. (Part No: R1194810)$412.39

Cylinder Head, Rebuilt - Cylinder comes with seats and guides but NOT valves. For model D17 gas with casting # AM4472. (Part No: R1199389)$395.36

Cylinder Head, Rebuilt - Cylinder comes with seats and guides but NOT valves. For model D17 gas with casting # AM4659. (Part No: R1193549)$395.36

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For model D19 diesel with casting # 4514790. Refundable $100 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1199462)$1064.17

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For model D19 diesel with casting # 4512884. Refundable $100 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1194356)$977.21

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For model WC gas engine with 12-4" studs and casting # U3001. Refundable $30 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1200302)$353.79

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For models WC, WD gas 15-3" studs with casting # U3001. (Part No: R1194117)$419.89

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For model WD45 gas with casting # AM3820. (Part No: R1194075)$427.15

Cylinder Head, Rebuilt - Cylinder Head comes with seats and guides but NOT valves. For models WD45, D19 both with diesel engines and casting # 4506503. Refundable $100 core charge will be added to your order and will not show on your order confirmation. (Part No: R1194083)$962.73

Cylinder Head, Rebuilt - Cylinder head comes with seats anf guides but NOT valves. For models 180, 190 both with diesel engines and casting # 4021854. (Part No: R1199512)$940.11

Cylinder Head, Rebuilt - Cylinder head comes with seats and guides but NOT valves. For models 30, 7040, 7045, 7050, 7060 all diesel engines with casting # 4035246. Refundable $35 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1199504)$928.34

Cylinder Head, Rebuilt - Cylinder come with seats and guides but NOT valves. For models 7040, 7050 both diesel with casting # 4035247. Refundable $35 core charge will be added to your order after processing and will not show on your order confirmation. (Part No: R1200328)$901.62

Exhaust Valve - For models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21. (Part No: 74036609)$27.09

Exhaust Valve Set - For models AC B, 1B, C, CA, B15, B125, D10, D12, D14, D15 (4-Cyl Gas). Exhaust Valve set of 4. To order valve locks use part # 70206880. (Part No: 70228589)$53.08

Exhaust Valve Set, 226 or 201 Gas - Set of 4 exhaust valves for W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. (Part No: 70241527)$43.20 [Show Picture]

Exhaust Valves - TWO VALVES. For D15 to engine SN# 119504 with 175 CID 4 cylinder Diesel Engine. Exhaust Valve Set (2). (Part No: 74505210)$25.70

Exhaust Valves, 262 Diesel - TWO VALVES. For D17 to engine SN# 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine SN# 113009-119937 not including SN# 's 117087-117104. Exhaust Valve Set (2). (Part No: 74505210)$25.70

Exhaust Valves, Set of 2 - For 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series engine. All with 301 CID 6 cylinder. Exhaust Valves Set of 2. 30 Degree face angle. Replaces 4023379 older 45 degree valves. Requires replacement of seats. (Part No: 74009936)$27.82

Flywheel Ring Gear - Has 116 teeth, O.D. 11.12", I.D. 10, 86" Fits D10 (SN# 3501>), D12 (SN# 3001>), D14 (SN# 19001>), D15(Gas LP). (Part No: 70233196)$37.44

Flywheel Ring Gear - For models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Part No: 74001167)$90.53

Flywheel Ring Gear - Has 139 teeth, 14.0625 inch O.D. For D17, 170, 175 all with gas engine, W225 SN# PU96714 and up with gas engine. Flywheel Ring Gear. (Part No: 70226830)$26.49

Flywheel Ring Gear - 86 Teeth For G with Continental N-62 Engine (Part No: R0583)$60.75

Freeze Plug - Package of 10. Verify OEM part number of 72080009 or 159312A. For models 160, 6040 (Part No: 731356M1)$17.94

Governor - For B SN# 123996 and up, 1B SN# 2836 and up, CA, D10, D12, D14, D15. Governor Assembly does not include housing; distributor type. (Part No: 70225349)$151.88 [Show Picture]

Governor Rod Linkage Spring - Distributor or magento ignition, overall length 3-5 8". For models B, IB, C, CA, D10, D12, D14, D15, I40, I60, I600, RC. (Part No: 70212321)$12.50 [Show Picture]

Hand Crank Bracket - For model G. (Part No: 800068)$21.75

Hand Crank Holder Brackets - Both Front and Rear Clips. For models RC, WC, WD, WD45, WF. (Part No: 208443)$14.50

Hand Crank with Spinner - For model G. Also replaces 800646. (Part No: 800168)$42.95

Hand Crank with Spinner - For models B, C, CA. (Part No: 207893)$42.90

Hand Crank, Starter - With Spinner. For models WC, WD, WD45, WF, RC. Replaces U3972. (Part No: 70216933)$58.50 [Show Picture]

Intake Valve - For models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21. (Part No: 74037135)$24.98

Intake Valve - For D17 to engine SN# 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine SN# 113009-119937 not including SN# 's 117087-117104. (Part No: 74506505)$15.95

Intake Valve - For models (180, 185, 190, all with 2800 Series Engine), (190XT, 200, 7000 with 2900 Series Diesel Engine), (7010, 7020, 8010, all with 649I-649T Series engine or 301 CID 6 cylinder). (Part No: 74023378)$28.56

Intake Valve Set - For AC B, 1B, C, CA, B15, B125, D10, D12, D14, D15, (4-Cyl Gas). Intake Valve set of 4. To order valve Locks use part # 70206880. (Part No: 70234829)$35.34

Intake Valve Set - Set of 4 intake valves, For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. (Part No: 70209132)$51.57

Lifter - For AD3. 152 Perkins diesel. With engine SN# less than 2820092. Non-adjustable type. (Part No: 31434163)$5.98 [Show Picture]

Lifter, New - For models 180, 185, (190, 190XT, 190XT III gas or diesel), 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7060, 7080, 7045, (7050 diesel). (Part No: 74026699_)$19.03

Lifter, Refaced - For models WC, WD, WD45, D17, 175. All with gas engines. (Part No: 203017)$16.08 [Show Picture]

Lifter, Refaced - For Model: G. (Part No: 800254)$15.29

Lifter, Refaced - For model D21. (Part No: 74025012)$16.08

Lifter, Refaced - For models 180, 185, (190 gas or diesel), 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7060, 7080, 7045, (7050 diesel). (Part No: 74026699-R)$16.08

Manifold Stud - 7 16" - 14NC x 7 16" - 20NF x 4-3 4" long. 6 used per engine, sold individually. For gas or LP Models: D17, 170, 175, (E, E3, K with 226 gas engines), 616, 622, 802, 802. (Part No: 70229339)$5.95

Pushrod - For AD3. 152 Perkins diesel. With engine SN# less than 2820092. (Part No: 31434307)$5.16

Rear Main Seal - With Press-on Oil Seal Retainer For WD45 with 230 Diesel Engine (Part No: SS48048)$77.87

Ring Gear - Starter flywheel ring gear. For models WC, WD, WD45, WF. 12.68 inches O.D. 11.725 I.D. .50 thick, 100 tooth. (Part No: 70208132)$42.06 [Show Picture]

Rocker Arm - For models (180, 185, 190, 190XT all diesel), 200, 210, 220, 4W220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, D21. (Part No: 70277421)$47.06 [Show Picture]

Rocker Arm (LH) - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 41151483)$15.03 [Show Picture]

Rocker Arm (RH) - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 41151484)$15.03

Rod, Reconditioned - Connecting Piston rod fits N62 engine in model G. Casting # is N62A400. (Part No: R1202415)$106.42 [Show Picture]

Thrust Washer Set - For models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Engine Thrust Washers Set (1 set per engine). (Part No: TW426)$55.69

Thrust Washer Set - 4 Pieces - FOR AD3. 152 Perkins diesel.With engine SN# less than 2820092. (Part No: 31137211_21)$5.81 [Show Picture]

Thrust Washers - Set of 4 Halves - FOR AD3. 152 Perkins diesel. Eng SN# 8504190> with Offset tab. Replaces 31137551 61. Set of 4 to make 2 Complete Thrust Washers. (Part No: 31137551)$9.59 [Show Picture]

Timing Cover Seal - For models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. (Part No: 48160)$37.43

Valve Guide - Valve Guide for N62 engine. (Part No: 217-3678)$4.90

Valve Guide Set - Quantity of 8. For model 160 (Part No: 72080045)$16.07

Valve Guide, Exhaust - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 3343J002)$4.52

Valve Guide, Intake - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. Sold in quantities of 2, price is for 1. (Part No: 3343F002)$3.55

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00

Valve Service Kit - For D15. Contains: springs, guides, locks, (no valves). (Part No: VSKA175)$120.03

Valve Service Kit - For models D17, W, W25, WC, WD, WD45, WF. All with either 201 or 226 CID 4 cylinder gas engine. Contains: springs, guides, locks, (no valves). (Part No: VSKA201)$54.36

Valve Service Kit - For D17 with 262 CID 6 cylinder diesel. Contains: springs, guides, locks, (no valves). (Part No: VSKA262)$180.08

Valve Service Kit - For models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010. Contains: springs, guides, locks, (no valves). (Part No: VSKA301)$123.35

Valve Service Kit - For models 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21, D3400, D3500. Contains: springs, guides, locks, (no valves). (Part No: VSKA426)$133.97

Valve Spring, Exhaust - Spring with damper, exhaust valve. 3-9 16 Std. bore. For model D15 with 175 CID 4 cyl diesel eng SN# up to 119504 and D17 with 262 CID 6 cylinder diesel eng SN# 113009 to 119937 except SN# 117087 to 117104. Must be ordered in multiples of 2. Price is for 1. (Part No: 74513811)$10.24 [Show Picture]

Valve Spring, Intake - Spring with damper, intake valve. 3-9 16 Std. bore. For model D15 with 175 CID 4 cyl diesel eng SN# up to 119504 and D17 with 262 CID 6 cylinder diesel eng SN# 113009 to 119937 except SN# 117087 to 117104. Must be ordered in multiples of 2. Price is for 1. (Part No: 74513813)$18.36

 
Engine Pistons and Sleeves
Cylinder Hone - For bores from 1 1 2 to 3 inches. Easily adjusts. Length of 7 3 4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704)$28.83 [Show Picture]

Pin Bushing - Piston Pin Bushing. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7 8 Std. bore, 30 degree exhaust valve face angle. For models 7010, 7020, 8010. For 180, 185, 190, 190XT, D21. Must be ordered in quantities of 2, price is for 1. (Part No: 74020049)$23.16

Piston - For AD3. 152 Perkins Diesel. With engine SN# less than 2820092. Price is per piston. For models 160, 715B, 840, D175. (Part No: 68332)$28.24

Piston - For 4 1 8 inch overbore, Single piston, medium compression. For models 170, 175, D17 all gas and WD45. (Part No: PA31)$62.67

Piston & Sleeve, Single Cylinder, Dished Piston - Overbore from 4" to 4-1 8" For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: 'Dished' Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Part No: SK155)$105.89

Piston & Sleeve, Single Cylinder, Flat Piston - Overbore from 4" to 4-1 8" For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: 'Flat' Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Part No: SK156)$104.77

Piston Groove Cleaner - For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)$24.95 [Show Picture]

Piston Pin Bushing - Piston Pin Bushing. For D3400 & D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1 4 Std. bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 180, 185, 190, 190XT, D21 (Part No: 74025031)$25.04

Piston Pin Bushing - For models D15D, D17D, WD45D, D19 gas or diesel. For 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, D21. (Part No: 74507127)$21.52

Piston Pin Bushing - For model G. (Part No: 827998)$14.56

Piston Pin Bushing - For models (WD45, D14, D17 diesel), (D19 gas or diesel). (Part No: 827980)$29.12

Piston Pin Bushing - For models 180, 185, 190XT, 200, 6060, 6080, 7000, 7010, 7020. (Part No: 814715)$22.20

Piston Pin Bushing - For models 210, 220, D21, 7030, 7040, 7045, 7050, 7060, 7080. (Part No: 828558)$25.96

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)$35.67 [Show Picture]

Piston Sleeve - For 4 1 8 inch bore piston. For models (170, 175, D17 gas), W25, WC, WD, WD45, WF. (Part No: SW32)$54.42

Piston Sleeve Seals - 2 required per sleeve. Price is for each. Minimum order is 2. Must be ordered in quantities of 2. For WD45 with 226 CID 4 cylinder gas engine. (Part No: GE35)$8.00

Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine SN# less than 2820092. (Part No: U5MK0034)$52.54

Piston and Sleeve Kit - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. All with D3400 or D3500 Non Mark II Diesel Engein, 426 CID 6 Cylinder, 4 1 4" Bore. Sleeve and Piston Kit includes Sleeves, Pistons, Rings, Pins and Retainers. Complete for 1 engine. (Part No: PKA426)$1075.25

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)$63.87 [Show Picture]

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome & oil control ring set. Overbore from 3-3 8" or 3-1 2 to 3-9 16". For D10, D12, D14 with 138 or 149 CID 4-cylinder gas engines. Also for D15 except Series II s N 9001 & up. (Part No: PK127)$279.64

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome & oil control ring set. Overbore from 4" to 4-1 8". For models W, WC, WF, W25 and WD with 201 CID 4-cyl gas engines. (Part No: PK120)$423.13

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome & oil control ring set. Overbore from 4" to 4-1 8". For WD45 and D17 with 226 CID 4-cyl gas engines. (Part No: PK121)$412.92

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome & oil control ring set. For 3-9 16" standard bore. For D15 to engine serial number 119504 with 175 CID 4-cylinder diesel engine. (Part No: PK128)$679.41

Sleeve & Piston Kit - For D17 with engine serial number 113009 to 119937 (not for engine serial number 117087 to 117104). For 262 CID 6-cylinder diesel engine. Kit is complete for 6 cylinders, one used per engine. Contains sleeves, pistons, retainers, top chrome & oil control ring set for 3-9 16" standard bore. (Part No: PK123)$1019.99

Sleeve & Piston Kit - Sleeve And Piston Kit B, IB, C, CA, B15, B125 - 3 7 16" Overbore (Part No: PK122)$315.60

Sleeve & Piston Kit - 3 7 8 Bore. For models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. (Part No: R3316)$878.75

Sleeve & Piston Kit - 3 7 8 Bore. For models 200, 7000, 7010, 7020 with 301 Turbo Diesel Engine. Need to verify if oil holes in main bears are round or oval. State this in the comments section of the order form if ordering on-line. (Part No: R3317)$834.00

Sleeve and Piston Kit - For 160 with AD3.152 Perkins 3 cylinder diesel engine. Sleeve and piston kit contains sleeves, pistons, rings, pins and retainers for 3.6" standard bore. (Part No: PK131)$204.65

Sleeve and Piston Kit - For AC 180, 185, 190, with 2800 series engine. 190XT with 2900 series diesel engine (301 CID 6-cyl). Sleeve and Piston kit includes Sleeves, Pistons, rings, pins and retainers for 3 7 8" standard bore. (Part No: PK190XT)$947.59

Sleeve, Perkins 152 Diesel - FOR AD3. 152 Perkins diesel.Price is per sleeve.Flange is (.150").With engine SN# less than 2820092. (Part No: 31358345)$32.47

 
Engine Rings
Piston Ring Set - Overbore 4-1 8" for 201 CID 4 cylinder gas engine. Contains 12 compression rings at 3 32, 4 oil rings at 1 4 inch. Contains: Ring set for 4 pistons~ For tractors: W, WC, WF, W25, WD. For 262, D19, GLEAMER C (Part No: PRS120)$57.62

Piston Ring Set - Ring set for 4 pistons. Overbore 4-1 8, 3 compressions rings 3 32 and 1 oil ring 1 4 for each piston. For tractors:WD45. For 4 cylinder gas engine. For 262, D19, GLEAMER C (Part No: PRS121)$57.62

Piston Ring Set - Ring set for 4 pistons. Overbore 3-3 8 To 3-9 16~ For tractors: D10 to No. 3500, D12 to No. 3000, D14. For 4 cylinder gas engines. For 262, D19, GLEAMER C (Part No: PRS127)$44.06

Piston Ring Set - For N62 4-cylinder engine in Model G (Standard bore is 2-3 8"). Contains: (8)3 32" compression rings and (4) 3 16" oil rings. This is for a STANDARD bore set. The following overbore sizes are available at $10 additional cost:.020, .030, .040, .060. Specify in COMMENTS when ordering if overbore size is needed. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 2C5671)$101.37

Piston Ring Set - For models B, IB, C, CA, B125 with 125 CID gas engines, D10 (all), D12 (to SN# 3501 with G138 engine only). Complete engine set with four-ring 3-3 8" bore pistons. This kit is for one engine. Contains 3 compression rings 1 8 inches, and 1 oil ring 3 16 inches per cylinder. (Part No: 70230093)$45.63 [Show Picture]

Piston Ring Set - For D10, D12 (SN# 3501 & up), D14, D15 (G149 engine). For four ring, 3-1 2" bore pistons. Complete for 1 engine. (Part No: 70230092)$74.25 [Show Picture]

Piston Ring Set - Complete set. 4" standard bore. Comes with 3 compression rings 1 8" and 1 oil ring 3 16". For models (W, W25, WC, WD, WF all with 201 CID gas engines), (WD45, 170, D17 all with 226 CID gas engines). (Part No: 70230091)$87.10 [Show Picture]

Piston Ring Set - 4 Cylinder - Piston Ring Set for WD, WD45, D17 with 4 1 8 inch bore piston, 2 Compression at 3 32, 1 Compression at 1 8 inch, and 1 Oil at 1 4 inch. Complete set for 1 engine. (Part No: 2C7794)$125.27

Piston Ring Set, 4" Bore - For G226 engine in: WD45. Complete set for 4 cylinder engine. Has (3) 1 8" compression and (1) 3 16" oil ring per cylinder. Standard 4" bore. (Part No: 2C702)$112.56

Piston Ring Set, Overbore - Ring set for 4 pistons. Overbore to 3-7 16, 3 compression rings at 3 32 and 1 oil ring at 3 16. 4 cylinder gas engine. For tractors: B, 1B, C, CA, B15, B125. (Part No: PRS122)$64.15

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00

Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine SN# less than 2820092. (Part No: 47P347)$13.99

Piston Rings - 3-7 8" bore, 18 compression rings at 3 32", 6 oil rings at 3 16". FOr Models: 180, 190, 190XT, 7000 Turbo. (Part No: 2C7174)$224.99

 
Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 (Part No: CHROMEEXHAUST)$0.00 [Show Picture]

Exhaust Elbow - For model 7000, 7010. (Part No: 70253661)$74.25

Exhaust Elbow - For models 5040, 5045, (5050 eng SN# 600000-699999). Replaces 72089361, 72091541. (Part No: 72091261)$79.96 [Show Picture]

Exhaust Elbow - For models 7030, 7040, 7045, 7050, 7060. (Part No: 70267640)$79.68

Exhaust Elbow - For 190, 190XT, 200, Gleaners G, L2, M, M2. (Part No: R3207)$66.83 [Show Picture]

Exhaust Manifold, Front - For models 7030, 7040, (7045 SN# 70-20417 and up), (7050, 7060, 7580 SN# 70-20714 and up), 7080, 8030, 8050, 8070. (Part No: 74036827)$153.31 [Show Picture]

Exhaust Stack, Chrome - Curved, double wall, Chrome Stack - 29" Tall - 3 1 2" O.D. For GAS Models: WC, WD, WD45, D17 To S#42000. (Part No: R4447)$138.92 [Show Picture]

Exhaust Stack, Chrome, Curved - Deluxe double-walled chrome curved stack. For models B, C, CA, RC, D10, D12, D14, (D15 up to SN# 9001). (Part No: R4936)$128.99

Exhaust Stack, Chrome, Straight - Deluxe Double-walled chrome straight pipe. For models B, C, CA, RC, D10, D12, D14, (D15 SN# up to 9001). (Part No: R4935)$109.15 [Show Picture]

Extension Pipe - Muffler, vertical exhaust stack and aluminized. 42 long, inlet I.D. 3, outlet O.D. 3. For models 190, 190XT. (Part No: 70244555)$37.91 [Show Picture]

Intake & Exhaust Manifold - For D14 (all serial numbers) and D15 (SN# 9001 and below) with gas engines. Intake and Exhaust Manifold. Does Not come with gasket. Gasket Available Part #70234140 for an additional charge. Note in comments section of order form if gasket required. (Part No: 70234143)$250.43 [Show Picture]

Intake & Exhaust Manifold - For D17 series III, WC, WD, WD45, all with gas engine. Intake & Exhaust Manifold, non threaded outlet. Manifold has improved larger throat. Uses Muffler #70234494. Also replaces OEM# 70224782. This does not include gasket set. Gasket set part #70229958. (Part No: 70229416)$174.12 [Show Picture]

Manifold - Fits Allis-Chalmers D10 (after serial #3501) and D12 (after serial #3001). It replaces OEM #70233235. Gasket set for this manifold is $8.00 additional - specify part # R0171G in 'Comments' if needed. (Part No: 70233235)$279.95 [Show Picture]

Manifold - For diesel models: 190XT, 200, 7000, 7010, 8010. Gaskets NOT included. (Part No: 74007652)$145.08 [Show Picture]

Manifold - For gas model: D19. Gaskets NOT included. Gasket Available as Part #4013G. (Part No: 74516769)$246.55 [Show Picture]

Manifold - For gas models: D17 series IV, 170, 175. Has threaded outlet. Gaskets NOT included. (Part No: 70257485)$163.08 [Show Picture]

Manifold - Intake and exhaust manifold for Model G. Does Not come with gasket. (If gasket is needed add note in comment section part R0279G.) (Part No: 800333)$91.14

Manifold - Intake and exhaust manifold for Model B, C, CA, RC. Gasket is available. Order Part # 70226096 if needed. Indicate in comment section when ordering - if needed. (Part No: 70225323)$138.05 [Show Picture]

Manifold Gasket - Manifold Gasket Set. Intake & exhaust. For tractors: B, C, CA, RC. (Part No: 70226096)$13.28 [Show Picture]

Manifold Pipe - Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For model D19. (Part No: R0055P)$18.76 [Show Picture]

Muffler - Round Muffler, after 106509 - M28A. For WC, WF (Part No: 70210137)$27.45

Muffler - Muffler, includes clamp & bracket. Gas and diesel.2-1 2" inlet length, 1-5 8" inlet I.D, 16-1 2" shell length, 10" outlet length, 1-3 4" outlet O.D. For D17, WD45. Type of clamp may vary slightly from the picture. (Part No: 70229531)$35.40 [Show Picture]

Muffler - Muffler, 32000 thru 42000. For D17 (Part No: 70234494)$39.27 [Show Picture]

Muffler - Muffler, oval, for D10 and D12 SN# 9002 and up. Inlet I.D. 1-3 8" , Outlet O.D. 1-1 2", Overall length 33-1 4" (Part No: 70242070)$70.67 [Show Picture]

Muffler - Muffler, 42001 and up. Vertical Exhaust Inlet I.D. 1-15 16", Outlet I.D. 2", Overall Length 29". For D17. Supersedes OEM# 237397. (Part No: 70246129)$47.02 [Show Picture]

Muffler - Vertical Muffler, diesel. For 180, 185. 2 3 4 INLET LENGTH, 2 3 8 INLET I.D. 16 1 4 SHELL LENGTH 15 OUTLET LENGTH, 2 OUTLET O.D. 34 OVERALL LENGTH, Oval Body - 4 1 4 X 9 Shell Dimension (Part No: 70248883)$68.21

Muffler - Gas, oval. For model 170. (Part No: 70249324)$51.21 [Show Picture]

Muffler - Muffler, vertical, gas & non-turbo diesel. SN# 19001 and up. For 190, 190XT (Part No: 70250632)$71.67 [Show Picture]

Muffler - Vertical muffler, overall length 40, round body, inlet 3 I.D., outlet 3 O.D. For models 210, 220. (Part No: 70253660)$89.36 [Show Picture]

Muffler - Vertical muffler for standard tractors, horizontal for low clearance. Overall length 40, round body, inlet 3 I.D., outlet 3 O.D. For 6060, 6070, 6080 (Part No: 70263428)$140.14 [Show Picture]

Muffler - Vertical muffler with aspirator tube. Overall length 49, oval body, inlet 4 I.D., outlet 4 O.D. For 7080, 7580 (Part No: 70269031)$194.71 [Show Picture]

Muffler - Vertical muffler, overall length 48, round body, inlet 3 I.D., outlet 3 O.D. For SN# 8553. For 200, 7000 (Part No: 70271755)$87.49 [Show Picture]

Muffler - muffler, oval - diesel. For 170 (Part No: 79015994V)$66.78 [Show Picture]

Muffler - Vertical muffler with aspirator tube. Overall length 44-1 4, oval body, inlet 4 I.D., outlet 4 O.D. For 4W-305, 8550 (Part No: 70259460)$454.05 [Show Picture]

Muffler - Combine muffler, horizontal, with Buda diesel. For A, C, CH, CR (Part No: 71136466)$71.64 [Show Picture]

Muffler - For model G (Part No: 800458)$43.28 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 1 5 16 Outlet O.D. - 2 Overall Length - 29 For D17 Gas (From S#42001). Use R1751 Clamp, Use R1800 Rain Cap (Part No: R1050)$54.96 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 Overall Length - 27 For D19 Gas. OEM# 70246130, Use R1753 Clamp, Use R1800 Rain Cap (Part No: R1563)$56.24 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. 1-11 16", Outlet O.D. 1-3 4", Overall Length 35". For models 160 with Perkins Diesel 1968-1973, 6040 Diesel 1980-1982. OEM# 70207310, Uses R1749 Clamp, and R1799 Rain Cap. (Part No: R1565)$44.32 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 1 15 16 Outlet O.D. - 2 Overall Length - 34 For 170, 175 Gas. OEM#, Use R1751 Clamp, Use R1800 Rain Cap (Part No: R1566)$58.66 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 3 4 Overall Length - 18 For 190 Gas & Diesel (To S#19000). OEM#, Use R1753 Clamp, Use R1756 Clamp (Part No: R1569)$79.50 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 1 2 Overall Length - 50 For 190 Gas (From S#19001). OEM#, Use R1753 Clamp, Use R1802 Rain Cap (Part No: R1570)$63.13 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 3 Outlet O.D. - 3 Overall Length - 40 For 190XT, Early 200, 210, 220 Diesel. OEM#, Use R1756 Clamp, Use R1805 Rain Cap (Part No: R1571)$50.09 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 3 Outlet O.D. - 3 Overall Length - 48 For 190 with Turbo Diesel, Late 200, 7000 (To S#8553) Diesel. OEM#, Use R1756 Clamp, Use R1805 Rain Cap (Part No: R1572)$75.52 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - Triangle Base Plate Outlet O.D. - 2 Overall Length - 28 For 5020, 5030. OEM#, Use R1800 Rain Cap (Part No: R3379)$220.71 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 3 Outlet O.D. - 3 Overall Length - 46 For 6060, 6070, 6080. OEM#, Use R1756 Clamp, Use R1805 Rain Cap (Part No: R1574)$128.49 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - Triangle Base Plate Outlet O.D. - 2 Overall Length - 36 For 6140 Diesel. OEM#, Use R1800 Rain Cap (Part No: R1573)$185.11 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 3 Outlet O.D. - 3 Overall Length - 48 For 7000 (From S#8553), 7010, 7020, 7030, 7040, 7045, 7050, 7060 Diesel. OEM# 70261975, 70268785, Use R1756 Clamp, and R1805 Rain Cap. (Part No: R1051)$99.14 [Show Picture]

Muffler - Vertical Exhaust Inlet I.D. - 4 Outlet O.D. - 4 Overall Length - 49 For 7080, 7580 Diesel with Aspirator Tube. OEM#, Use R1759 Clamp, Use R1807 Rain Cap (Part No: R1575)$208.66

Muffler - Vertical Exhaust Inlet I.D. - 4 Outlet O.D. - 4 Overall Length - 44 1 4. For models 8550, 4WD-305(4WD Articulated) with Aspirator Tube. OEM#, Use R1759 Clamp, Use R1807 Rain Cap (Part No: R1575)$208.66

Muffler - Horizontal Exhaust Inlet I.D. - 3 1 2 Outlet O.D. - 3 Overall Length - 25 For model 440 Steiger. OEM#, Use R1758 Clamp, Use R1805 Rain Cap (Part No: R1608)$112.21 [Show Picture]

Muffler - Dual Outlet Vertical Exhaust Inlet I.D. - 2 3 8 Threaded Outlet O.D. - 1 3 4 Overall Length - 12 For V460D, V461D, V465D. OEM# (Part No: R1744)$52.73

Muffler - Horizontal Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 Overall Length - 20 For V460D, V461D, V465D. OEM#, Use R1753 Clamp (Part No: R1745)$45.95

Muffler - With Adapter & Clamp Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 1 2 Overall Length - 12 For V460D, V461D, V465D. OEM# WD-58 (Part No: R1746)$45.09

Muffler, Horizontal - Round body. Inlet 2-3 8" I.D, outlet 2-3 4" O.D, 18" overall length. For models 190 to SN# 19000 1964-1968. (Part No: 70243283)$89.61 [Show Picture]

Muffler, Thru Hood - 2 1 2" INLET LENGTH, 1 3 8" INLET I.D., 16 1 2" SHELL LENGTH, 10" OUTLET LENGTH, 1 1 2" OUTLET O.D., 29" OVERALL LENGTH, REPLACES : 70233450 NOTE : Vertical Round Body - 3 1 4" Shell Diameter (INCLUDES BRACKETS - (1) TO HEAD BOLT & (1) TO MANIFOLD) Fits Models: B THRU HOOD - 1938-1957, C THRU HOOD - 1938-1957, CA THRU HOOD - 1938-1957, D10 with GAS ENGINE SN# <9001, D12 with GAS ENGINE SN# <9001, D14 with GAS ENGINE SN# <9001, D15 with GAS ENGINE SN# <9001 (Part No: 70227240)$42.21 [Show Picture]

Muffler, Underhood, Vertical - A= 1" inlet length, B= 1-3 8" inlet I.D., C= 4-1 4" shell length, D= 3-3 4" outlet length, E= outlet bent pipe, F= 9" overall length. For models B, C, CA all 1938 to 1957. (Part No: 70210082)$56.28 [Show Picture]

Muffler, Underhood, Vertical, Long Type - A= 7" inlet length, B= 1-3 8" inlet I.D., C= 12-3 4" shell length, D= 9-1 4" outlet length, E= 1-1 2" outlet O.D., F= 29" overall length. For models B, C, CA all with long type underhood. (Part No: 70210081)$29.92 [Show Picture]

Muffler, Vertical - Muffler, less clamp and bracket. 2-1 4" inlet length, 1-5 8" inlet I.D, 16-1 2" shell length, 10-1 4" outlet length, 1-3 4" outlet O.D, 29: overall length, round body, 3-1 4" shell diameter. Gas & diesel. For models D17, WD, WD45. (Part No: 70219534)$27.45 [Show Picture]

Muffler, Vertical - Oval muffler for D15 SN# 9002 and up. Inlet I.D. 1-3 4", Outlet O.D. 1-3 4" Overall length 27" (Part No: 70237811)$46.08

Muffler, Vertical - Oval body. Inlet 2-3 8" I.D, outlet 2" O.D, 27" overall length. For models D15 diesel SN# 9002 and up, D17 diesel SN# 38964 and up, 1960 to 1967. (Part No: 70237290)$57.49 [Show Picture]

Muffler, Vertical - Round body. Inlet base plate, outlet 2" O.D, 36" overall length. For models 6140 Diesel. (Part No: 70299482)$195.37 [Show Picture]

Muffler, Vertical - Round body. Inlet base plate, outlet 2"O.D, 28" overall length. For models 5020, 5030(1984). (Part No: 72099119)$273.80 [Show Picture]

Muffler, Vertical - Round body 3-1 4" shell dia. A= 3" inlet length, B= 3" x 4-1 8" base plate, C= 16-1 2" shell length, D= 6-1 2" outlet length, E= 2-1 4" outlet O.D., F= 26" overall length. For models (D15 with diesel engine and SN# up to 9001), (D17 with diesel engine and SN# up to 38964). (Part No: 70234493)$43.29 [Show Picture]

Straight Pipe - Vertical Exhaust Inlet I.D. - 3 Outlet O.D. - 3 Overall Length - 40 For D21 Diesel190 Gas (Use with R1569 Muffler)190XT Diesel. OEM#, Use R1756 Clamp, Use R1805 Rain Cap (Part No: R1564)$40.37 [Show Picture]

Straight Pipe, Chrome - This is a Chrome Straight Stack, Double Walled - 29" Tall - 3 1 2 O.D. Vertical exhaust Stack for Allis-Chalmers GAS ENGINE models: WC, WD, WD45, and D17 To S#42000. (Part No: R4446)$109.15 [Show Picture]

 
Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on gas model. (A) Bowl O.D. at top: 7-1 4. (B) Cone I.D. at top: 3-1 2. (C) Bowl side height: 3. (D) Overall height: 4-1 8. Small bowl 7-1 4 diameter, for 2 to 3 inlet. For A, C, CH, CR, D17, F, F2, G, K, K2, L, M (Part No: 71125804)$11.98 [Show Picture]

Air Cleaner Cap - Fits 1-1 4" applications only. Inlet diameter 1-5 8, O.D. of cap 4, Overall height 1-3 8. For models B, C, CA, D10, D12. Replaces 225860, 242072 (Part No: 70242072)$18.95 [Show Picture]

Air Cleaner Cap - 1-3 4". For models WD, WD45, W6, D15. (Part No: 70208222)$25.98 [Show Picture]

Air Cleaner Clamp - Air cleaners with spring clip cup retainer require this clamp. For models B, C, CA. (Part No: 70225817)$17.54 [Show Picture]

Air Cleaner Cup - For models B, C, CA. (Part No: 70225818)$22.15 [Show Picture]

Air Cleaner Hose - Hose, air cleaner to carburetor. For models WC, WD, WF. Measures 1.472 I.D. and 8 1 4 length. (Part No: 70208114)$11.56 [Show Picture]

Air Cleaner to Carb Hose - 1-7 8" I.D. both ends, 8-7 16" outside curved length. For model WD45 SN# 96714 and up. (Part No: 70226266)$18.95 [Show Picture]

Air Filter - Air cleaner element for gas engines, SN# 42001 & up. Also D17 Series IV. For model D17. (Part No: 70237395)$24.62 [Show Picture]

Carburetor Float - For Zenith caruretor models 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981. For Tractor models: B, C, CA, D10, D12, WC, WD. (Part No: CTP28)$22.00

Carburetor Float - For G. Carburetor Float. (Part No: 70800472)$29.58 [Show Picture]

Carburetor Float - For models B, C, CA, RC, WC, WF, D14, D15. Carburetor Float for Marvel Schebler with small bowl. Carbs: TSX138, 154, 159, 186, 264, 305, 363, 380, 422, 470, 486, 670, 701, 815, 844. (Part No: 70219985)$11.80 [Show Picture]

Carburetor Float - For models WD, WD45, D17, 175. Carburetor Float for Marvel Schebler Large Bowl measures 2 3 4 inches at widest point: TSX561, TSX773, TSX869, TSX871, TSX928. Replaces OEM part number 70226456. (Part No: 70226456)$25.66 [Show Picture]

Carburetor Float - Use with Holley Carbs For 190 (Part No: R3589)$37.50

Carburetor Fuel Needle - Main jet adjusting needle assembly for Zenith carburetor series 61 & 62, model numbers: 0-9707, 0-10981, 0-12401, 0-12749. For D10, D12, W, WC, WD, WF. (Part No: 71-28)$12.62 [Show Picture]

Carburetor Kit, Basic - FOR ZENITH Carburetor 10698A OR ALLIS CHALMERS Carburetor 212845 For B, C, RC. (Part No: BK21AV)$29.70 [Show Picture]

Carburetor Kit, Basic - FOR ZENITH CARBS 9705, 9706 OR ALLIS CHALMERS CARBS 212845-2, 212844-2 For B, C, RC. (Part No: BK22V)$24.98 [Show Picture]

Carburetor Kit, Basic - Zenith carbs 9507, 9492 or Allis Chalmers carbs 209663, 209662. For model RC. (Part No: BK23V)$27.57 [Show Picture]

Carburetor Kit, Basic - For ZENITH carbs 9797A, 9797C, 10981A, 8979, or Allis Chalmers carbs 213348-3, 224749, 209312 For tractors: WC, WD, WF. (Part No: BK25V)$34.67 [Show Picture]

Carburetor Kit, Basic - FOR MARVEL SCHEBLER CARBS TSX159, TSX422 OR ALLIS CHALMERS CARBS 222088, 224750 For W, WC, WD, WF (Part No: BK27V)$30.00 [Show Picture]

Carburetor Kit, Basic - FOR ZENITH CARBS 11141, 11142, OR ALLIS CHALMERS CARBS 225621, 225622 For CA. (Part No: BK29V)$26.34 [Show Picture]

Carburetor Kit, Basic - For B with 211954 carb, carb 9804. Contains: throttle shaft, float valve, float lever pin & gaskets. (Part No: C524AV)$35.12

Carburetor Kit, Basic - Kit for Zenith 13303 or 13327 carbs used on 190. (Part No: Z108)$28.00 [Show Picture]

Carburetor Kit, Basic - Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Part No: Z101)$26.36 [Show Picture]

Carburetor Kit, Basic - Kit for Zenith 13294, 11588, 12217, 12590, 12232 carbs used on 170, D17, WD45. (Part No: Z104)$29.88 [Show Picture]

Carburetor Kit, Basic - Kit for Marvel TSX464, TSX561, TSX773, TSX871, TSX869, TSX928 carbs used on 170, 180, 185, D15, D17, WD45. (Part No: MS102)$23.26 [Show Picture]

Carburetor Kit, Basic - Kit for Marvel TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX670, TSX701, TSX815, TSX844 carbs used on B, C, CA, D14, D15, WC, WD. (Part No: MS101)$22.94 [Show Picture]

Carburetor Kit, Basic - Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Part No: MS103)$22.00 [Show Picture]

Carburetor Kit, Basic - Kit for Marvel TSV13 carb. Used on Model: G (Part No: MS100)$28.00 [Show Picture]

Carburetor Kit, Basic - Kit for Zenith 7078, 7971 carbs used on WC. (Part No: Z109)$28.00 [Show Picture]

Carburetor Kit, Basic - Kit for Holley 3257, 2871, 2871-1 carbs on 190. (Part No: H102)$28.00 [Show Picture]

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Part No: K2119)$25.86 [Show Picture]

Carburetor Kit, Comprehensive - 10699A Zenith carburetor or 216937 Allis Chalmers carb number. For model C. (Part No: BK21V)$27.57 [Show Picture]

Carburetor Kit, Comprehensive - FOR ZENITH Carburetor 11588 OR ALLIS CHALMERS CARB 227101 For D17, WD45. (Part No: BK28AV)$26.94 [Show Picture]

Carburetor Kit, Comprehensive - For 6496, 6699, 6817 ZENITH Carburetor NUMBERS U1750, 2043, 2212 ALLIS CHALMERS CARB NUMBERS. For models U, UC. (Part No: C520)$32.22 [Show Picture]

Carburetor Kit, Comprehensive - Allis Chalmers Carburetor numbers 224641, 224640. For model C. (Part No: C521AV)$36.14

Carburetor Kit, Comprehensive - For model C with Carburetor 216937. (Part No: C521V)$39.92

Carburetor Kit, Comprehensive - For Zenith carbs 9705, 9706 or Allis CHalmers carbs 212845-2, 212844-2. For models B, C, RC. (Part No: C522V)$34.83

Carburetor Kit, Comprehensive - For Zenith carbs 9507, 9492 or Allis Chalmers carbs 209663, 209662. For model RC. (Part No: C523V)$36.18

Carburetor Kit, Comprehensive - Complete repair kit to Zenith 10698A or Allis Chalmers carb 212845. For models B, RC. (Part No: C524V)$38.06

Carburetor Repair Kit - Complete carburetor repair kit for Zentih carburetors 8879 or Allis Chalmers Carb 209312. For models WC, WF. (Part No: C525AV)$49.00 [Show Picture]

Carburetor Repair Kit - Complete carburetor repair kit is that same as the basic kit but comes with both throttle and choke shafts, for Zenith carbs 11141, 11142, or Allis Chalmers carbs 225621, 225622. For model CA. (Part No: C529V)$34.16

Carburetor, New - Copy of the original Marvel Schebler TSV13. Fits the Model G. (Part No: R4528)$345.26 [Show Picture]

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: D19 replaces Marvel-Schebler # TSX394, TSX777, TSX848, TSX268, TSXU839, TSXU995. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 14997)$305.00 [Show Picture]

Carburetor, New - With reversible linkage, This Zenith carburetor outperforms the original carbs used on: G230 engine replaces TSX591, TSX821, TSX876, TSX918, TSXU838, TSXU1007. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 14999)$285.00 [Show Picture]

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5 16 INCHES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Part No: 12522)$269.50 [Show Picture]

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carburetor replacing the Marvel TSX815 used on: 1957-CA, D14 1956 and up, D15, H-3 & T-102 Crawlers, T-100 crawler. Center to center on 2 mounting bolts is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 12566)$256.00 [Show Picture]

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: Fits D17 (1956-63), 170, 100 Harvester, WD45 Crawler, 2 row cotton pickers, D-Graders, Replaces TSX464, TSX561, TSX773, TSX853, TSX869, TSX871, TSXU835, TSXU836. Center to center on the 2 mounting bolts is 2 3 8 inches. Made in USA, 1 year warranty. (Part No: 14991)$289.33 [Show Picture]

Carburetor, Rebuilt - Fits B, C - replacement for OEM 9705, 9706, 11544B. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1102-CARB)$147.39

Carburetor, Rebuilt - Fits B, C - replacement for OEM 11544B, 9706, 10697, 10699. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1104-CARB)$167.49 [Show Picture]

Carburetor, Rebuilt - Fits B, C - replacement for OEM TSX305, TSX154. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1106-CARB)$147.39

Carburetor, Rebuilt - Fits CA - replacement for OEM 11141A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1107-CARB)$147.39

Carburetor, Rebuilt - Fits CA - replacement for OEM TSX470, TSX486. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1108-CARB)$147.39

Carburetor, Rebuilt - Fits CA - replacement for OEM 11142A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1109-CARB)$147.39

Carburetor, Rebuilt - Fits G - replacement for OEM TSV13, TSV24. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1110-CARB)$216.75 [Show Picture]

Carburetor, Rebuilt - Fits WC (1934-1937) - replacement for OEM 0-7178, 7078. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1112-CARB)$147.39

Carburetor, Rebuilt - Fits WC (1938 & UP) - replacement for OEM 10698, 10698A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1114-CARB)$147.39

Carburetor, Rebuilt - Fits WC, WD - replacement for OEM 10981A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1115-CARB)$147.39

Carburetor, Rebuilt - Fits WC 1938 & UP, WD, WD45 - replacement for OEM TSX159, TSX422. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1116-CARB)$147.39

Carburetor, Rebuilt - Fits WD, WD45 - replacement for OEM 9707. We MUST have either your old carburetor part number or the distance between the mounting studs on the manifold (stud center to center). Two different size carbs were used on these tractors. Specify in 'COMMENTS' when ordering. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1118-CARB)$147.39 [Show Picture]

Carburetor, Rebuilt - Fits WD45 - replacement for OEM TSX464, TSX561, TSX871, TSX773. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1120-CARB)$147.39

Carburetor, Rebuilt - Fits D10, D12 (1961-68) - replacement for OEM 12749, 12401. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1122-CARB)$147.39

Carburetor, Rebuilt - Fits D14, D15 - replacement for OEM TSX701, TSX670, TSX815, TSX844, . Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1124-CARB)$147.39

Carburetor, Rebuilt - Fits D17 - replacement for OEM 11588. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1125-CARB)$147.39

Carburetor, Rebuilt - Fits D17 (EARLY) - replacement for OEM TSX561, TSX464, TSX773, TSX871, . Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1126-CARB)$147.39

Carburetor, Rebuilt - Fits D17 (LATE), 170 - replacement for OEM TSX869. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1127-CARB)$147.39

Carburetor, Rebuilt - Fits D17 (LATE) - replacement for OEM 12217. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1128-CARB)$147.39

Carburetor, Rebuilt - Fits D19 - replacement for OEM TSX848. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1130-CARB)$147.39

Carburetor, Rebuilt - Fits 175 - replacement for OEM TSX928. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1131-CARB)$147.39

Carburetor, Rebuilt - Fits 170, 175 - replacement for OEM 13294. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1132-CARB)$147.39

Carburetor, Rebuilt - Fits 180, 185 - replacement for OEM 13416. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1134-CARB)$147.39

Carburetor, Rebuilt - Fits 190XT - replacement for OEM 13327. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1136-CARB)$147.39

Carburetor, Rebuilt - Fits 190 WITH G2800 ENG. - replacement for OEM 13303. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1137-CARB)$164.73

Carburetor, Rebuilt - Fits 190 - replacement for OEM R3257-3A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1138-CARB)$164.73

Choke Cable - Universal choke cable 72 inches long, 7 16 inch thread dia. (Part No: CC72)$15.22 [Show Picture]

Float Valve - Viton float valve for Zenith carburetors. For models D17, WD45. (Part No: 70223909)$19.06 [Show Picture]

Fuel Bowl - Fuel filter bowl, uses 251397 or 70251397 element. For 5040, 5050, 6040 (Part No: 2091267)$8.82 [Show Picture]

Fuel Filter - Spin-on, O.D. 3.81", I.D. 15 16"-16 thread, height 5.53". FOr Models: 180, 185, 190, 190XT, 190XT III, 210, 220, 6060, 6070, 8550, D21. (Part No: 74028945)$9.94 [Show Picture]

Fuel Filter, CAV type - For models 160, 170, 175, 4660, 5040, 5045, 5050, 5670, 5680, 6040, 6140, 6670, 6680, 6690, 4650. Replaces 70251397. NOTE: verify you have CAV type filter before ordering. (Part No: S.00296)$5.86 [Show Picture]

Fuel Filter, Glass Body - For models 200, 7000, 7020, 7030, 7040, 7050, 7580, L, L2, M, M2. (Part No: 71367687)$25.88 [Show Picture]

Fuel Filter, In-Line, 1/4 inch - Inlet 1 4, outlet 1 4, O.D. 1-29 32, length 4-1 16. (Part No: 6511393)$6.92 [Show Picture]

Fuel Filter, In-Line, 3/8 inch - Inlet 3 8, outlet 3 8, O.D. 1-29 32, length 3-7 8 (Part No: BF836)$6.28 [Show Picture]

Fuel Filter, In-Line, 5/16 inch - Inlet 5 16, outlet 5 16, O.D. 1-29 32, length 4-5 32. (Part No: BF840)$6.22 [Show Picture]

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5 16, outlet 5 16, O.D. 2-1 8, length 3-21 32. (Part No: BF7736)$5.94 [Show Picture]

Fuel Filter, Metal Body - For models 7000, 7020, 7030, 7040, 7045, 7060, 7080, 7580. (Part No: 74036432)$26.63 [Show Picture]

Fuel Injection Pump - For models 5040, 5045. (Part No: CAV3233F430)$673.65

Fuel Lift Pump with Bowl, Perkins Diesel - For models 160 with Perkins 152 Diesel. (Part No: 3637288M91)$26.25 [Show Picture]

Fuel Line - Steel Fuel Line YOU MAY HAVE TO TRIM TO FIT. For models B, C, CA, D10, D12, (D14 Auxiliary engine only, not tractor). Also replaces OEM 70215478 and 70207278. (Part No: 70243108)$31.50

Fuel Line, Steel - 1 4" O.D, 11" overall length, 1 8" NPT thread, inverted flare nuts. For model G. (Part No: 800066)$24.90 [Show Picture]

Fuel Pump - For models 5040, 5045, 5050. Fuel Pump with 0-ring replaces 2089595, 2091469 and 2092036. (Part No: 72093848)$22.62 [Show Picture]

Fuel Pump - With O-Ring For Deutz F1 2 FL511, F1 2 F410, F2 L511. OEM# 1172782, 1173937, 1260045 (Part No: FP4003)$40.92

Fuel Pump - For Deutz FL 912, FL 912W (Part No: FP4002)$42.52

Fuel Pump - With O-Ring For Deutz F3L 812, F3L 912, F3L 912W, F5L 912, F5L 912W, F6L 812, F6L 912, F6L 912W. OEM# 4231021 (Part No: FP4001)$34.35

Fuel Pump Repair Kit - For models 170, 175. (Part No: 1883344M92)$19.79 [Show Picture]

Fuel Sending Unit - For models 170, 175. (Part No: 70249218)$50.15 [Show Picture]

Fuel Sending Unit - For models (180 SN# up to 12800), 185. (Part No: 70261619)$29.79 [Show Picture]

Fuel Sending Unit - For models 190, 190XT, 190XT III, D21. Replaces 70239788. (Part No: 70276224)$45.16 [Show Picture]

Fuel Strainer Assembly - 1 8" inlet, 1 8" outlet. For model G. (Part No: 70800069)$23.25 [Show Picture]

Fuel Tank - For models 5040, 5045, 5050. (Part No: 72089848)$279.40

Fuel Tank - Primer color may vary, steel, sealed with Red Kote tank liner. For model G. (Part No: 800070)$389.00

Fuel Tank Cap - For models B, C, CA, WD, WD45. Replaces OEM 70253690. This is a non-vented cap. (Part No: D5NN9030A)$9.98 [Show Picture]

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)$29.99 [Show Picture]

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)$65.00 [Show Picture]

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)$27.62 [Show Picture]

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)$8.38 [Show Picture]

Idler - For models F2, F3, K2, L, L2, L3, M, M2, M3, MH2. (Part No: 79008328)$24.96

Idler Block - Wooden idler block. For A, AH, B, C, CH, E, R. Price is for EACH. Minimum Order is 4. (Part No: 71116256)$22.88 [Show Picture]

Injector - For models 7000, 7010, 7020. ** Refundable $30 core charge per Injector will be added to your order. (Part No: 74007968-R)$57.04 [Show Picture]

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)$9.97 [Show Picture]

Nozzle - Injector nozzle, new. For 190 and 190XT with 2900 engine, 200, 7030 after SN# 3D53558, 7040, 7045, 7050 after SN# 353558, 7060, D21 with 3500 engine, and combines G, L with 3500 engine, M with mark I 120 HP engine, N5. (Part No: 74036044)$75.03 [Show Picture]

Pre-Cleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on diesel models D2900, 649T prior to SN# 12201. (A) Bowl O.D. at top: 10-1 2. (B) Cone I.D. at top: 5-9 16. (C) Bowl side height: 3. (D) Overall height: 4. Large bowl 10-1 2 diameter, for 3 to 4 in For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, D21, G, L, L2, M, M2 (Part No: 70651270)$17.16 [Show Picture]

Sediment Bowl - Assembly, large bowl, single inlet type. For models 170, 180, D15, D17, D19, D21, WC, WD45, WF. (Part No: 237946)$25.90 [Show Picture]

Sediment Bowl - Small Bowl, 2 outlet type for Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Part No: 70239167)$23.04 [Show Picture]

Sediment Bowl Assembly - Sediment bowl. Fits Model B, C, CA, R, D14, D17, D19. Replaces 70237944. (Part No: 910513)$28.68 [Show Picture]

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1 8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R)$1.50 [Show Picture]

Sediment Bowl, Large - For models WD45D, D15D, D17, D19, D21, 170, 180. All with diesel engines. (Part No: 581355)$28.04 [Show Picture]

Throttle Knob - Plastic knob, 3 8" fine thread. For model D21. Also can be used for PTO knob. (Part No: R4572)$7.00 [Show Picture]

Throttle Lever Friction Block - For models WC, WD, WD45, WF. (Part No: 222454)$30.00

Throttle Lever Knob - For models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 220901)$9.80 [Show Picture]

Throttle Quadrant - Comes with bushing. For models WD, WD45. (Part No: 227004)$90.00

Throttle, Traction Booster, Hydraulic and PTO Levers Knob - Plastic knob, 3 8" fine thread. For models 190, 190XT, 200, 210, 220. (Part No: R4572)$7.00 [Show Picture]

Turbo Elbow - For models 190, 200. (Part No: 70244418)$68.65

Turbocharger - For models 190XT, 200, 7010, 8010 all TO4B80 turbo models. (Part No: 74009171)$504.44 [Show Picture]

Turbocharger - For models 6060, 6070, 6080. Replaces 74062759, 74009831. (Part No: 74063533)$727.26 [Show Picture]

Turbocharger - For models 7080, 7580, 8030, 8050, 8070. Replaces 74036606, 74035196, 74036395, 74062752. (Part No: 74057982)$823.89 [Show Picture]

Turbocharger, NEW - For models 7030, 7040, 7045, 7050, 7060 all with model TO4B90. Includes Mounting Gaskets. BOLT ON REPLACEMENT FOR AIRESEARCH. IF REPLACING RAY JAY TURBO, LINES & AIR TUBE NEED TO BE CHANGED OR MODIFIED. Replaces 74029309, 74029207, 74036513, 74062751, 84062751, 409080-5009. (Part No: D4029309)$515.46 [Show Picture]

 
Gaskets
Gasket Material, Cork Rubber - 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)$10.95 [Show Picture]

Gasket Material, Cork Rubber - 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)$13.75 [Show Picture]

Gasket Material, Exhaust Manifold - 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)$19.95 [Show Picture]

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)$14.90 [Show Picture]

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)$22.90 [Show Picture]

 
Gauges
Ammeter - For models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Part No: 70254407)$18.00 [Show Picture]

Ammeter - For models B, C, CA, RC, WC, WD, WD45, WF. (Part No: 70275840)$11.16 [Show Picture]

Ammeter - 30-30 Style - White Face with AC Logo. For D14, D15, D17. OEM# 240987 (Part No: R4017)$29.93 [Show Picture]

Amp Gauge - With Allis-Chalmers logo. White face, chrome bezel. 60-0-60. For models B thru WD45, D10 thru D21, and 160 thru 220. (Part No: ACS1833)$29.95

Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1 4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)$43.69 [Show Picture]

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)$38.40 [Show Picture]

Instrument Cluster Assembly - With panel and all gauges and lights. For model 5040. Replaces OEM number 72091823. (Part No: 72089936)$163.11

Instrument Cluster Assembly - Instrument housing with all gauges and lights. For Models 5045, 5050. (Part No: 72093725)$146.64

Instrument Cluster Wire Harness - For model 5040. (Part No: S.67268)$33.33

Instrument Panel - For model G. Made in the USA. (Part No: 800124)$44.82 [Show Picture]

Instrument Panel Trim - Stainless steel. For models (D15 SN# 9001 and up), (D17 SN# 32001 to 75000), D19. (Part No: 234433)$70.47 [Show Picture]

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Part No: 70207834)$21.72 [Show Picture]

Oil Gauge - OIL GAUGE For D10, D12, D14, D15, D17 (Part No: 70228718)$14.24 [Show Picture]

Oil Gauge Copper Line Kit - Universal, for tractors using 1 8 x 6 ft. copper oil line. Includes 6 Ft 1 8 Line, 2 x 5 16 -24 UNF Nuts, 2x Compression sleeves, and a 1 8-27 NPTF Female to 5 16-24 UNF male adapter. (Part No: UNI523)$22.75 [Show Picture]

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 8" tube. Brass. (Part No: 919095)$14.35

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 4" tube. Brass. (Part No: IHS626)$14.35 [Show Picture]

Oil Pressure Gauge - Zone Style - White faced with black lettering 0-30 lb. range. For D10, D12, D14, D15, D17 Series I & II. OEM# 70228719, 70232546 (Part No: R4015)$31.43 [Show Picture]

Oil Pressure Gauge - For models D10, D12, D14, D15, D17. (Part No: 2348811)$25.98 [Show Picture]

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002)$15.95 [Show Picture]

Oil Pressure Gauge - White Face. 30 psi, engine mounted. For models B, IB, C, CA, G, RC, WC, WF, WD, WD45. Replaces 70207834. (Part No: 207834)$32.50

Oil Pressure Gauge - Zone Style - with AC Name 0-45 lb. Range For D17 Series III & IV, 170. OEM# 70228719, 70232546. (Part No: R4016)$50.08 [Show Picture]

Oil Pressure Gauge 1949-57 - Orange Bezel, White Face Replaces OEM# 70207834H. No studs. For models B, IB, C, CA, WD, WF, WC, WD45. (Part No: 2348803-O)$19.95

Oil Pressure Gauge 194o-49 - Black Bezel, White Face Replaces OEM# 70207834H. No studs. For models B, IB, C, CA, WD, WF, WC, WD45. (Part No: 2348803-B)$19.95

Oil Pressure Gauge After 1957 - Chrome Bezel, White Face Replaces OEM# 70207834H. No studs. For models B, IB, C, CA, WD, WF, WC, WD45. (Part No: 2348803)$19.95 [Show Picture]

Proofmeter Drive Assembly - With Cover, 2 gears, 2 gaskets. For models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 (Part No: 720046764)$35.43

Tach Drive Cable - For models 5040, 5045, 5050. Replaces OEM number 72093805. (Part No: 72091198)$17.28

Tach Drive Right Angle - 16 MM. For models 5040, 5045, 5050. (Part No: 72091195)$23.19

Tachometer - With AC name on face. For models D14, (D15 gas up to SN# 6630), D17 gas. Replaces 70261728, 70261779, 70228818, 70234095. (Part No: 70229755)$47.74 [Show Picture]

Tachometer - For models (D15 SN# 6631 and up), I-60, I-600. (Part No: 70236777)$113.40

Tachometer - For model D21. (Part No: 70239731)$189.00

Tachometer - For model D19. Replaces 236655. (Part No: 70236655)$166.05

Tachometer - Tach drive runs off cam. For model 190 up to SN# 20599. (Part No: 70243569)$127.58

Tachometer - Tach drive runs off the alternator. For models (190 from SN# 20600 and up), 190XT, 200. Replaces 70255036. (Part No: 70252409)$127.58

Tachometer - Includes tachometer, bracket and clamp. For models D10 and D12 up to SN# 9000. Replaces 23218A. Uses tach cable 244104. (Part No: 232189)$192.38 [Show Picture]

Tachometer - For model D17 diesel. Replaces 0230062-2, 70242374. (Part No: 70230062)$159.97 [Show Picture]

Tachometer Bracket - For models G, GN, GW, 70 (Gas & LP). (Part No: F1508R)$33.59

Tachometer Cable - For models D10 and D12 up to SN# 9000. (Part No: 244104)$29.25 [Show Picture]

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)$23.85 [Show Picture]

Temperature Gauge - For models B, C, CA, RC, WC, WD, and WD45. Stem is 3 3 8" overall length. This gauge screws into top radiator hose inlet. (Part No: R0934)$27.00 [Show Picture]

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)$25.30 [Show Picture]

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For models CA, WD, WD45, (D10 up to SN# 9199), (D12 up to SN# 9167), D14, (D15 up to SN# 9000), (D17 up to SN# 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598. (Part No: 70228977)$99.95 [Show Picture]

Tractor Meter w/ 90 degree Drive - For models 5040, 5045, 5050. Also replaces OEM numbers 72091876, 72091194, 72091404. (Part No: 72089939)$74.68

Water Temperature Gauge - With 63" Lead - with AC Name. For models WD45 Diesel, D10, D12, D14, D15, D17. (Part No: R4014)$58.73 [Show Picture]

 
Hitch / Drawbar
3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: WD and WD-45 - Cat. I II (Use original swinging drawbar)Weight is 175#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK305)$749.00 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D14, D15 - Cat. I II (Use original swinging drawbar). Weight is 175#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK306)$1003.32 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: CA - Cat. I (Swinging drawbar included). Weight is 120#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK307)$1173.15 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: B, C - Cat. I (Hyd. cylinder and hoses included.)(NOTE: Tractors must be equipped with hydraulic pump and standard drawbar - parts available from used parts companies if needed.) Weight is 110 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK308)$726.52 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series I-III - Cat I II (Use original swinging drawbar.) Weight is 205 Lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Typical freight is $100.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK315)$1009.73 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series IV - Cat I II (Use original swinging drawbar.) Weight is 175 Lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK317)$991.58 [Show Picture]

Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)$17.62