(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Accessories & Universal Parts
[ Turn Off Pictures ]
 
Brakes
Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3 8" deep throat x 2-1 8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$89.00 [Enlarge Picture]

 
Cooling System
Drain Tap (1/4 Inch X 18 NPT)
- Fits many models. Please check dimensions before ordering. Fits many radiators and engine blocks. (Part No: 1KS517)
$5.99 [Enlarge Picture]

Lower Radiator Hose Heater, 1-1/2 in
- 600 watts.Fits many models. For 1-1 2 in I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Part No: GEH150)
$42.66 [Enlarge Picture]

Lower Radiator Hose Heater, 1-1/4in
- 600 watts.Fits many models. For 1-1 4" I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Part No: GEH125)
$44.04 [Enlarge Picture]

Lower Radiator Hose Heater, 1-3/4
- 600 watts.Fits many models. For 1-3 4" I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Part No: GEH175)
$41.12 [Enlarge Picture]

Lower Radiator Hose Heater, 2 inch
- 600 watts.Fits many models. For 2 in I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Part No: GEH200)
$40.89 [Enlarge Picture]

Universal Heat Indicator
- Heat Indicator for 2" mounting hole. Complete assembly with bracket and adaptors. 70" capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Part No: UTG25)
$29.06 [Enlarge Picture]

 
Drive Train
Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.06 [Enlarge Picture]

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)$106.29

Alternator, Unicharge
- Unicharge alternator, 63 amp. (Part No: ALT263SE)
$106.29 [Enlarge Picture]

Alternator, Unicharge - Unicharge alternator, 80 amp. (Part No: ALT280SE)$129.28

Battery Blanket
- Battery thermal wrap, length 28", 120 volts, 60 watt. Simply wraps around battery to heat and insulate. Oil and acid resistant cover. (Part No: GEBB22200)
$43.90 [Enlarge Picture]

Battery Blanket
- Battery thermal wrap, length 28", 120 volts, 60 watt. Simply wraps around battery to heat and insulate. Oil and acid resistant cover. (Part No: GEBB22100)
$41.38 [Enlarge Picture]

Battery Cable
- Standard battery ground strap. 5.5 inches center to center. (Part No: D1NN14301H)
$11.82 [Enlarge Picture]

Battery Cable
- 6 volt, 11 inches long. Standard battery connector with 7 16 inch connector on other side. (Part No: FAE14301B)
$14.66 [Enlarge Picture]

Battery Trickle Charger - 6 and 12 volt powerful 900mA multiple feature fully sealed charger employing state of the art electronics. Automatically senses the state of charge and adjusts charging rate. For use with 6 or 12 volt wet-cell lead acid batteries, fully sealed lead-acid batteries, gel-cell batteries, AGM and deep cycle batteries. Universal AC input 100-240 VAC, 50 60 Hz. Includes ring terminal adapter with fuse and alligator clips. Includes 12 ft. output cable lead. (Part No: B1TL1206)$56.00

Cable, Battery to Starter
- 75 inches long-Gauge 1. Replaces OEM #AF1754R, AR20253. (Part No: AR88485)
$39.68 [Enlarge Picture]

Cable, Battery to Starter
- 64 inches long-Gauge 1. Replaces OEM #AR20216 (Part No: AR26621)
$33.34 [Enlarge Picture]

Cable, Battery to Starter
- 45 inches long- Gauge 1. Replaces OEM #AR35213. (Part No: AT13528)
$24.86 [Enlarge Picture]

Cable, Battery to Starter
- 38 inches long. (Part No: AR28950)
$17.98 [Enlarge Picture]

Cable, Battery to Starter
- 19 inches long. (Part No: AR51395)
$16.37 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011) (Part No: 40011)
$32.82 [Enlarge Picture]

Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) (Part No: 40501)
$35.99 [Enlarge Picture]

Hour Meter
- DC voltages from 12V to 36V nominal. Heavy duty glass reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage.Fits 2-1 4 inch opening, three mounting screws with nuts and blade terminals included. (Part No: HM771)
$43.69 [Enlarge Picture]

Key Switch
- Fits .75 inch hole. For most models. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) (Part No: 8N3679C)
$8.84 [Enlarge Picture]

Light Switch, Universal, Push/Pull Type - Fused 20 amp, 2 position, threaded mounting stem 1 2" dia., 5 8" long. (Part No: L5007)$8.97

Primary Wire 14 Gauge - 100 Ft Spool. (Part No: S.23316)$25.05

Primary Wire 16 Gauge - 100 Ft Spool. (Part No: S.23317)$19.97

Revolving Beacon
- The 3 Magnetic pads adjust independently and are ideally suited to the contoured surface of the metal tractor cab roof. 7 inches high, 6 12 inches wide. NOTE: to be used on slow moving vehicles only! (Part No: S12337)
$89.63 [Enlarge Picture]

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Spark Plug
- Standard tip, 7 8"-18 thread, 5 8" reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$6.18 [Enlarge Picture]

Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$3.66 [Enlarge Picture]

Spark Plug
- Standard tip, 14mm thread, 3 8" reach. Replaces Champion CJ8, Motorcraft A7NX. NOTE: Verify spark plug type before ordering. (Part No: AL255)
$2.64 [Enlarge Picture]

Spark Plug - Standard tip, 14mm thread, 3 8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Part No: AL456)$2.64

Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$17.22 [Enlarge Picture]

Spark Plug Wire Set, Universal, 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$20.02 [Enlarge Picture]

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER)$0.00

Starter, Generator Tag, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.40 [Enlarge Picture]

Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.40 [Enlarge Picture]

Switch to Starter Cable - Red. 44 inch length. (Part No: 26A244)$22.00

Switch to Starter Cable - Red. 15 inch length. (Part No: 26A215)$12.00

Switch to Starter Cable - Red. 38 inch length. (Part No: 26A238)$19.50

Universal Heat Indicator
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch capillary line. Fits all liquid cooled engines. (Part No: UTG25)
$29.06 [Enlarge Picture]

Voltage Reducer with Bracket
- 12 volt to 6 volt. (Part No: S.52671)
$11.82 [Enlarge Picture]

Voltage Regulator
- Volatage regulator, 6 volt. (Part No: VR1818)
$59.49 [Enlarge Picture]

Voltage Regulator, 12 Volt
- Voltage regulators, 12 volt. (Part No: VR1816)
$36.51 [Enlarge Picture]

Wire Terminal Assortment
- 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213)
$15.48 [Enlarge Picture]

 
Engine Gaskets
Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$7.14 [Enlarge Picture]

Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)
$7.86 [Enlarge Picture]

Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$11.78 [Enlarge Picture]

 
Engine Parts
Block Heater
- 1-3 4 inch frost plug type. 600 watts. (Part No: GE24)
$33.42 [Enlarge Picture]

Block Heater
- 1-1 2 inch diameter cup type frost plug model. 600 watts. (Part No: D0NN8B152C)
$32.01 [Enlarge Picture]

Block Heater
- 1-5 8 inch diameter block type with o-ring seal. Fits most 6 cylinder models. 600 watts. (Part No: GE315)
$42.42 [Enlarge Picture]

Block Heater
- Engine heater, 3 4 inch pipe thread. Fits most diesels. 400 watts. (Part No: 839071M94)
$42.44 [Enlarge Picture]

Block Heater
- Frost plug engine heater. 1-1 4 inch diameter clamp and o-ring mounting. Fits most diesels. 600 watts. (Part No: 19841A91)
$53.90 [Enlarge Picture]

Engine Heater, Tank Type
- 850 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 16-22 quart capacity liquid cooled engines. (Part No: GE850)
$66.99 [Enlarge Picture]

Engine Heater, Tank Type
- 1000 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 23-30 quart capacity liquid cooled engines. (Part No: GE1000)
$69.48 [Enlarge Picture]

Engine Heater, Tank Type
- 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Part No: GE1500)
$88.33 [Enlarge Picture]

Engine Heater, Tank Type
- 2000 watt tank type engine heater with built-in thermostat. Draws 16.6 amp. For use on 41-60 quart capacity liquid cooled engines. (Part No: GE2000)
$171.29 [Enlarge Picture]

 
Engine Pistons and Sleeves
Piston Groove Cleaner
- For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)
$24.95 [Enlarge Picture]

Piston Ring Compressor
- Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)
$35.67 [Enlarge Picture]

Ridge Reamer
- Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$63.87 [Enlarge Picture]

 
Exhaust System
Chrome Exhaust Stacks
- Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 (Part No: CHROMEEXHAUST)
$0.00 [Enlarge Picture]

Rain Cap
- This rain cap is for a 1.5 inch pipe. (Part No: R1798)
$8.74 [Enlarge Picture]

Rain Cap
- This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$8.94 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$9.30 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.250 inch pipe. (Part No: R1801)
$9.64 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$9.80 [Enlarge Picture]

Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$10.56 [Enlarge Picture]

Rain Cap
- This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$11.42 [Enlarge Picture]

Rain Cap
- This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$13.06 [Enlarge Picture]

Rain Cap
- This rain cap is for a 4.50 inch pipe. (Part No: WC14)
$16.02 [Enlarge Picture]

Rain Cap
- This rain cap is for a 5.0 inch pipe. (Part No: WC15)
$16.84 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.10 [Enlarge Picture]

 
Fuel System / Air Intake
Choke Cable
- Universal choke cable 72 inches long, 7 16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$15.22 [Enlarge Picture]

Diesel Additive 16 OZ
- StarTron Diesel Engine Additive 16 oz. Treats 512 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD16)
$29.81 [Enlarge Picture]

Diesel Additive 32 OZ
- StarTron Diesel Engine Additive 32 oz. Treats 1, 024 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD32)
$51.83 [Enlarge Picture]

Diesel Additive 8 OZ
- StarTron Diesel Engine Additive 8 oz. Treats 256 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD8)
$25.20 [Enlarge Picture]

Fuel Can, Metal Safety - Safety Can, 5 gallon. Eagle Type-I. Transport and handle flammable fluids safely and easily. Designed to help prevent flammables from igniting and protecting personnel from fire or explosion. Flashback is prevented by double-mesh flame arrestor screen inside spout. Spring-loaded cap closes automatically after pouring. Synthetic gaskets are used to resist virtually all liquids maintaining a long life and a tight seal. This Type 1 Storage Can has an extra large pour-fill opening to speed dispensing flow. Constructed from Galvanized Steel for storing petroleum where purity and color are not critical. • Eagle Type-I safety cans are made of galvanized steel and meet OSHA and NFPA Code 30 requirements and are UL and ULC listed and FM approved for safe handling and storage of gasoline and other flammable liquids. • All Type I fuel cans come with B1F15 funnel. Includes plastic funnel (Part No: michael)$62.74

Fuel Cap with Gauge - 2 Inch Inside Diameter cap with gauge in cap. For 9 inch deep tank depth - has float that moves up and down twisted shaft to move gauge. (Part No: B1AC09)$19.70

Fuel Filter, In-Line, 1/4 inch
- Inlet 1 4, outlet 1 4, O.D. 1-29 32, length 4-1 16. (Part No: 6511393)
$6.92 [Enlarge Picture]

Fuel Filter, In-Line, 3/8 inch
- Inlet 3 8, outlet 3 8, O.D. 1-29 32, length 3-7 8. (Part No: BF836)
$6.28 [Enlarge Picture]

Fuel Filter, In-Line, 5/16 inch
- Inlet 5 16, outlet 5 16, O.D. 1-29 32, length 4-5 32. (Part No: BF840)
$6.22 [Enlarge Picture]

Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$29.99 [Enlarge Picture]

Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$65.00 [Enlarge Picture]

Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$27.62 [Enlarge Picture]

Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$8.38 [Enlarge Picture]

Fuel Transfer Pump
- Fill-Rite 1210C DC pump dispenses up to 15 GPM (57 LPM). The pump weighs less than 27 pounds (12.2kg), with hose and nozzle, and has a draw that’s easy on the DC power source. Explosion-proof UL listed 1 4 HP motor with permanent magnet and ball bearings, Heavy-duty switch, Thermal overload protection and junction box, Heavy-duty three-wire battery cable, Iron rotor, Automatic bypass valve, Built-in strainer, 12' (3.7m) hose with static ground wire, Manual nozzle with nozzle boot that protects against dirt and contamination, 2 inch threaded base for tank openings Corrosion-Proof adjustable section pipe, Machined carbon vanes Pump may be padlocked, No foot valve required. (Part No: FR1210C)
$417.52 [Enlarge Picture]

Fuel Transfer Pump, Piston Style (hand)
- Fill-Rite Piston Hand Pump Series 5200 This compact, high flow, dual-action design delivers up to 20 GPM (76 LPM) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil or a wide variety of approved liquids. Lightweight cast aluminum body, Stainless steel inner liner, Easy mount 2 inch tank adapter, Corrosion-Proof adjustable suction pipe, Pump flow can be reversed by rotating piston 180°, Steel yoke handle, All models UL listed, Anti-siphoning device, Pump may be padlocked. (Part No: FR152)
$162.51 [Enlarge Picture]

Fuel Transfer Pump, Piston Style (hand)
- Fill-Rite Hand Lever Piston and Air Operated Pump Series 20. The economical way to transfer tough industrial fluids easily, safely and accurately. Perfect for barrels, storage tanks and drums, the FR20 Hand Lever Piston Pump transfers at approximately 11 fl. oz. (325ml) per stroke.Telescoping suction pipe for drums up to 36½ (91.4cm) in depth, Body made from durable poly-propylene, Nitrile seals. (Part No: FR20)
$77.14 [Enlarge Picture]

Fuel Transfer Pump, Rotary Style (hand)
- Fill-Rite Rotary Hand Pumps Series 100 Especially effective with medium viscosity liquids, as well as oils, gasoline and diesel fuels, the rotary action of these easy-to-use pumps allows smooth, continuous transfer at up to 10 GPM (38 LPM) per 100 revolutions. Lightweight cast aluminum body, Built-in check valve and strainer, Easy mount 2 inch tank adapter, Corrosion-Proof adjustable suction pipe, Anti-siphoning device, Pump may be padlocked, All Models UL Listed. (Part No: FR112)
$192.20 [Enlarge Picture]

Gasoline Additive 8 0Z
- Star*Tron Gasoline Additive 8 oz. Treats 128 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG8)
$23.58 [Enlarge Picture]

Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$9.97 [Enlarge Picture]

Pre-Cleaner Assembly
- For 4.00" dia. inlet tube, height 7.66", body dia., 10.63". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Part No: H000858)
$67.81 [Enlarge Picture]

Pre-Cleaner Assembly
- For 3.00" dia., inlet tube, height 6.19", body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Part No: H001249)
$39.51 [Enlarge Picture]

Pre-Cleaner Assembly
- For 2.50" dia. inlet tube, 6.19" hieght, body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Part No: H001251)
$42.00 [Enlarge Picture]

Pre-Cleaner Assembly
- For 2.25" dia. inlet tube, height 6.19", body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Part No: H001250)
$43.65 [Enlarge Picture]

Pre-Cleaner Assembly
- For 2" dia. inlet tube, height 4.75", body diameter 5.59". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Part No: H002040)
$43.64 [Enlarge Picture]

Precleaner Assembly - 2.25 inch base. (Part No: ABC383)$74.95

 
Gaskets
Gasket Material, Cork Rubber
- 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR3321)
$10.95 [Enlarge Picture]

Gasket Material, Cork Rubber
- 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.75 [Enlarge Picture]

Gasket Material, Exhaust Manifold
- 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$19.95 [Enlarge Picture]

Gasket Paper, .0160
- .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$14.90 [Enlarge Picture]

Gasket Paper, .0275
- .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.90 [Enlarge Picture]

 
Gauges
Ammeter
- Terminal type Ammeter. 30 - 30. Chrome Ring. 2 Inch. (Part No: A0NN10670A)
$8.98 [Enlarge Picture]

Ammeter Gauge
- 60-0-60, 12 volt, 2" body dia. (Part No: AMG60)
$23.14 [Enlarge Picture]

Hourmeter, Analog
- 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40 [Enlarge Picture]

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 8" tube. Brass. (Part No: 919095)$14.35

Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 4" tube. Brass. (Part No: IHS626)
$14.35 [Enlarge Picture]

Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002)
$15.95 [Enlarge Picture]

Temperature Gauge
- Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.85 [Enlarge Picture]

Temperature Gauge, Universal
- For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$25.30 [Enlarge Picture]

 
Hitch / Drawbar
Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.62 [Enlarge Picture]

Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$7.96 [Enlarge Picture]

Drawbar
- Standard Heat Treated Drawbar Blue, 30 1 2" L Hole Center To Hole Center, 2 1 2" Wide, 1" Thick (drawbar fits between lift arms) (Part No: 9N5182HTB)
$40.38 [Enlarge Picture]

Drawbar Blue
- Extra H.D. Heat treated drawbar, 1-1 2" x 3" x 26", with Cat. II pins. (1-1 8"). (Part No: DKN5182)
$55.34 [Enlarge Picture]

Drawbar Blue
- Standard BLUE drawbar - 1" x 2-1 2" x 26", with 7 8" pins, (Category I). (Part No: 9N5182B)
$40.56 [Enlarge Picture]

Hitch Pin, 1/2 inch
- 3-5 8" usable length, 1 2" usable dia., 9 64" hair pin hole dia. Heat treated. (Part No: 7811)
$4.92 [Enlarge Picture]

Hitch Pin, 3/4 inch
- 6-1 2" usable length, 3 4" useable dia., 5 32" hair pin hole dia. Heat treated. (Part No: 7832)
$7.86 [Enlarge Picture]

Hitch Pin, 5/8 inch
- 5-1 2" usable length, 5 8" usable dia., 5 32" hair pin hole dia. Heat treated. (Part No: 7822)
$6.32 [Enlarge Picture]

Hitch Pin, 7/8 inch
- 6-1 2" useable length, 7 8" useable dia., 5 32" hair pin hole dia. Heat treated. (Part No: 7842PIN)
$9.82 [Enlarge Picture]

LINCH PIN
- LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316)
$3.90 [Enlarge Picture]

Leveling Assembly
- Universal Economy Leveling Assembly. 1-5 16" body of high strength tubing, thread size, 7 8" fine thread-study clevis at each end with 5 8" pin holes. May be used right or left. Can Replace NCA577A & Fork. 18 inches closed, 28 inches open. (Part No: LB152)
$24.27 [Enlarge Picture]

Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$284.34 [Enlarge Picture]

Ratchet Top Link
- Top link, 16" body. 1" Category II ball joints. Forged ends with 1-1 4" NC threads. Swedged steel center section. Adjusts 25-3 4" to 32-1 4" overall. Dichromate plated (Part No: TL175)
$119.99 [Enlarge Picture]

Top Link
- Heavy duty top link, 1-1 4" NC threads. Forged ends with 1" sockets. 16" body, adjusts 23" to 32" overall. Dichrome Plated. (Part No: EC0N576AA)
$43.22 [Enlarge Picture]

Top Link
- Top link, 16" body, 1". Category II ball joints. Forged ends with 1-1 8" NC threads. Swedge steel center section. Adjusts 21" to 31". Dichromate plated. Comparable to our JSA2000B and JSA2000R except body and ends are plated. Not available in colors. (Part No: TL162)
$35.85 [Enlarge Picture]

Top Link Assembly
- Top Link Assembly, CAT I & II. Verify required length before ordering. This Top Link Adjusts From 24 1 2" to 34 1 2" (Part No: D0NN576B)
$80.49 [Enlarge Picture]

Top Link Blue
- Top link, 16" body, 3 4". Category I ball joints. Adjusts 20-1 2" to 29" overall. Painted blue. (Part No: JSA1000B)
$25.95 [Enlarge Picture]

Top Link Blue
- Top link, 20" body, 3 4". Category I ball joints. Adjusts 25" to 35" overall. Painted blue. (Part No: JSA1020B)
$35.25 [Enlarge Picture]

Top Link Blue
- Top link, 24" body, . Category 1 ball joints (3 4"). Adjusts 29" to 39" overall. Painted blue. (Part No: JSA1024B)
$34.47 [Enlarge Picture]

Top Link Blue
- Top link, 16" body. Combination Category II tractor & Catagory I implement ends. Adjusts 19-1 2" to 29-1 2". Painted blue. (Part No: JSA1200B)
$32.31 [Enlarge Picture]

Top Link Blue
- Top link, 16" body, 1". Category II ball joints. Adjusts 21" to 33" overall. Painted blue. (Part No: JSA2000B)
$32.55 [Enlarge Picture]

Top Link Blue - Top links, 20 inch body, 1 inch. Category II ball joints. Adjusts 25" to 37". Painted blue. (Part No: JSA2020B)$34.02

Top Link Blue - Top link, 24" body, 1". Category II ball joints. Adjusts 29" to 41". Painted blue. (Part No: JSA2024B)$47.14

Top Link-Economy Forged
- Category 1 application only! Forged, bright plated ends with 1-1 8 inch threads. 9 inch center body is one-piece with swedged ends. Easy to use lever type locking device. Convenient adjustment handle to body center. 9 inch body, 3 4 inch ball joints. Adjust 13 to 19 inch overall. Dichromate plated center body. (Part No: JSA1009)
$28.94 [Enlarge Picture]

Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1" thick x 2-1 2" width) . Prevents drawbar from rotating. (Part No: 49A29)
$26.72 [Enlarge Picture]

Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$27.98 [Enlarge Picture]

Universal Stabilizer Chain Kit
- Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH)
$47.67 [Enlarge Picture]

 
Hydraulic System
FILTER ELEMENT
- 10 Micron replacement element for SF1-10. (Part No: 1A9021)
$10.66 [Enlarge Picture]

FILTER ELEMENT
- 25 Micron replacement element for SF1-25. (Part No: 1A9023)
$10.64 [Enlarge Picture]

FILTER ELEMENT
- 10 Micron replacement element for SF2-10. (Part No: 1A9251)
$28.94 [Enlarge Picture]

Filter Assembly, Hydraulic Oil
- 20 GPM Capacity Assembly with 10 Micron Element. 3 4 NPT ports. 4 inch diameter-7-1 2 inches long. Equipped with standard By-Pass Valve-opens at 15 PSI. Includes filter element. Order Replacement Element as part number 1A9021 (Part No: SF1-10)
$32.19 [Enlarge Picture]

Filter Assembly, Hydraulic Oil
- Full Flow Hydraulic Oil Filter. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 20 GPM Capacity Assembly with 25 Micron Element. 3 4" NPT ports. 4" dia., 7-1 2" long. (Part No: SF1-25)
$32.49 [Enlarge Picture]

Filter Assembly, Hydraulic Oil
- Full Flow Hydraulic Oil Filter Assembly. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 60 GPM Capacity Assembly with 10 Micron Element. 1-1 4" NPT ports. 5-1 2" dia., 11-1 2" long. (Part No: SF2-10)
$76.28 [Enlarge Picture]

Filter Assembly, Hydraulic Oil
- Full Flow Hydraulic Oil Filter Assembly. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 60 GPM Capacity Assembly with 25 Micron Element. 1-1 4" NPT ports. 5-1 2" dia., 11-1 2" long. (Part No: SF2-25)
$71.79 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: H42-2M-12)
$13.84 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 15 inch
- Universal. 15 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: H42-2M-15)
$23.10 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 18 inch
- Universal. 18 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: H42-2M-18)
$16.20 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1 2 inch I.D. double wire braid (SAE-2R) with 1 2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Part No: H42-2M-24)
$15.72 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: H42-2M-30)
$21.44 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 36 inch
- Universal. 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Part No: H42-2M-36)
$23.54 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 42 inch
- Universal. 42 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: H42-2M-42)
$26.78 [Enlarge Picture]

Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Part No: H42-2M-48)
$28.18 [Enlarge Picture]

Hydraulic Hose Sleeve
- Comes in a 50 foot roll at $1.39 per foot. Nylon Hose Sleeve, black in color. Outside flat 1.88 inches. Nom I.D. 1.14 inches. Abrasion resistant fabric sleeve. Extends indivdual hose life. Excellent product for holding two or more hoses in a single bundle. (Part No: NHS114X600)
$2.46 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 5000 PSI Gauge. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. Serves as master gauge to check pump & valve output. Normal recommendation use gauge with twice the capacity of average hydraulic working pressure. (Part No: PMHG2)
$13.60 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG60)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG100)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG160)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG200)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG300)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 2000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG2000)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 5000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG5000)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 3000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG3000)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 1500 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG1500)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG1000)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG600)
$14.40 [Enlarge Picture]

Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG400)
$14.40 [Enlarge Picture]

 
Implements
BLADE BOLT KIT
- For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1 8-12 inch, B = 3 1 2 inch, C = 1 3 8 inch, D = 1 inch, E = 9 16 inch, F = 1 2 inch, G = 2 1 2 inch, H = 1.492 (for 1 1 2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607)
$16.66 [Enlarge Picture]

Caster Assembly
- Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2" diameter, 8" overall length, 7-1 4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$172.49 [Enlarge Picture]

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)$27.92

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)$40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)$75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)$95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)$98.19

Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.20 [Enlarge Picture]

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)$21.27

 
Lights
12 Volt Head Light
- (Single) Head Light Assembly 12-volt, grey - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. (Part No: L525HG-12V)
$30.71 [Enlarge Picture]

2 Sided Flashing Amber Warning Light
- Universal Mount to Fender. 2 Sided Flashing Amber Warning Light. Has thick rubber mounting gasket and an on-off switch. Steel body, grey finish. (Part No: L660A-12V)
$63.61 [Enlarge Picture]

Headlamp Assembly, 12 Volt Blue
- Metal body and bezel, blue enamel finish, 5-3 4" diameter. Price is for one. (Part No: L5525D-12VB)
$61.36 [Enlarge Picture]

Implement Light
- Tractor Implement Light. Durable, molded weatherproof housing cushions the par 36 sealed beam from road shock and vibration. Universal, 5 16 inch stud and adjustable zinc-plated bracket allow mounting in any position. 10 inch lead wire exits through the back of the housing. Sealed beam snaps into housing for fast and easy service. (Part No: L505-12V)
$24.88 [Enlarge Picture]

Light Switch
- Push Pull Type Universal Light Switch. 2 Position, 2 Terminal. Threaded mounting on 1 2 inch stem 5 8 inches long. (Part No: 20A1716)
$9.95 [Enlarge Picture]

Light Switch
- Chrome knob push-pull, 2 position vertical, non fused. (Part No: L5011)
$10.98 [Enlarge Picture]

Light Switch
- Chrome knob push-pull, single pole vertical, non fused for grounded frame. (Part No: L5031)
$12.62 [Enlarge Picture]

Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$19.56 [Enlarge Picture]

Red Lens Tail Lamp
- Lamp complete with bulb. Universal bracket, black finish, 3-3 4 inch lens diameter. 12 volts. (Part No: L428-12V)
$16.62 [Enlarge Picture]

Rotating Beacon Warning Lights - Amber, Dual Bar, Bolt on. 12 Volt. (Part No: VLC2096)$204.59

STROBE LIGHT
- 4 IN AMBER DUAL FLASH. PrecoStrobe lighting safety lights. Magnetic mount, double flash, amber lens color. 80 double flashes per minute, 12 - 24 volt systems. Height: 4.649" (118mm). Width: 6.400" (163mm). (Part No: SL3416AD)
$207.71 [Enlarge Picture]

Safety Light Amber
- 12 volt Amber Safety Light, 4 and a 1 4 dia., 3 8Dia by 5 8 mounting Stud.Does not include Flasher. (Part No: S.61357)
$23.90 [Enlarge Picture]

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585)$61.13

Universal Headlamp
- 12 Volt 5 3 4" Headlamp Assembly. Metal Body and Bezel. Blue enamel finish. (Part No: 310068)
$61.36 [Enlarge Picture]

Universal Headlamp
- 6 Volt 5 3 4" Headlamp Assembly. Metal Body and Bezel. Grey enamel finish. (Part No: 310066F)
$54.90 [Enlarge Picture]

Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$120.44 [Enlarge Picture]

Worklight 12 Volt
- Red 12 Volt worklight with handle, on off switch, swivels and rotates. (Part No: S.42792)
$29.93 [Enlarge Picture]

Worklight 12 Volt Black
- 12 Volt worklight with handle, on off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771)
$31.65 [Enlarge Picture]

 
Miscellaneous
Back Up Alarm
- Mechanical alarm sounds when vehicle reverses. 8 inch alarm contains four hammers. Mounts on to wheel. Comes complete with universal mounting hardware. Complies with OSHA regulationsfor construction, industrial, and agricultural equipment. (Part No: CVA8)
$115.88 [Enlarge Picture]

CabCAM Camera Observation System
- When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C)
$339.62 [Enlarge Picture]

CabCAM Video System
- Includes 5.5" Black & White CRT Monitor, Black & White Camera, Cigarette Lighter Adapter, DC Adapters. Weatherproof Black & White Camera.Infrared Illuminators allow up to 32 ft of night vi sibility, made to withstand off-road conditions, audio capabilities.CRT Black & White Monitor.High resolutionmonitor. Features POWER button, contrast knob, brightness knob, volume knob, channel 1 & 2 camera button, mode (auto manual), day night brightness button, manual mirroring switch for two cameras, loudspeaker, external speaker jack, audio video output. This system can be wired to automatically display camera CH1 on screen when triggered by another circuit. The day night auto brightness option can also be wired to be triggered by a lamp switch. Adjustable Mounting Bracket, Anti-V ibration Pad, Weatherproof Video Cables, Cigarette Lighter Adapter, DC Adaptor. This system can be expanded to support up to two cameras. Color cameras are compatible, but still display black & white on screen. (Part No: CC55BW)
$167.46 [Enlarge Picture]

CabCAM Video System, Quad
- (Includes 7" Monitor and 2 Cameras) Includes 2 Waterproof Cameras. CCD Color with Audio, 18 Infrared Illuminators Allow up to 16 feet of Visibility in Dark, Image Mirroring Function, Made to Withstand Off-Road Conditions.7" LCD Color Quad Monitor Is Able To Show 4 Camera Views At One Time. Control Box For Direct Power Input For Cameras, AV1, AV2, AV3 & AV4 Video Inputs Allow Hook-up To Four Cameras. Color LCD Screen, Menu Button, DVD Input, Loudspeaker.Power Supply Cord. Plug AV Conversion Cable In The Front To Play A DVD. The Main Harness Has RCA Output Jacks To Hook To Larger Screen (TV) Or A Recording Device. AV Conversion Cable, Swivel Mounting Bracket with Mounting Pad, Stationary Mounting Bracket with Thumb Screws, 22 Pin Harness, Remote Control, Cigarette Lighter Power Adapter. NOTE:Total Camera Power Usage Cannot Exceed 1200mA. CAM87 Cameras Included In This Kit Use 300mA at Full Power. Please Check Camera Max Power Consumption Before Adding Additional Cameras. (Part No: CC7M2CQ)
$633.60 [Enlarge Picture]

CabCAM Video System, Wireless
- Includes 5.6" Monitor and 2 Cameras. 200 yd barrier-free Transmission range.Wide-Angle Color Camera.Monitor with antenna.Four camera capability 2.4GHz wireless receiver.The monitor includes power indicator, remote receiving window, MENU button, channel selection, loudspeaker, support attaching slot and power supply terminal.Weatherproof Color Camera.One Channel 3 and one Channel 4 camera.Infrared Illuminat ors allow up to 32 feet of night visibility, image mirroring function, made to withstand off-road co nditions, audio capabilities.Each camera has an antenna and a power supply jack.Require 12V power source.Base-Mounted Remote Antenna with 9.75' cord, Ball Swivel Mounting Bracket with Mountin g Pad, U-Support Mounting Bracket with Thumb Screws, 6 Pin Power Wire Harness with Jack for AC Cigarette Lighter DC Adaptor, AC Power Adaptor, RCA Cable, Full-Featured Remote Control. This system can be expanded to support up to four cameras. (Part No: WL56M2C)
$538.85 [Enlarge Picture]

Canopy
- 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$402.16 [Enlarge Picture]

Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$70.84 [Enlarge Picture]

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)$61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602)$103.07

Canopy, Small Tractors
- 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$350.00 [Enlarge Picture]

Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R)
$220.12 [Enlarge Picture]

Fulton Implement Jack
- Gray painted along with base, handle & securing pin, zinc irridite plated. Mounts drilled in four places to allow jack to swing in 90 degree increments. Top crank models feature fold away handles. Uses 9 16 diameter pin. Handle mounted on top. 2000lb capacity, 10 inch lift height, 15 inch overall height. Center of mount to base is 11 inches. (Part No: ASJ210TH15)
$52.59 [Enlarge Picture]

Fulton Implement Jack
- Painted gray. Includes base plate, handle, securing pin, zinc irridite plated. 2000 lb lifting capacity, 15 inch lift height, handle is on side, 20 inch overall height, 16 inches center of mount to base. (Part No: ASJ215ST20)
$69.19 [Enlarge Picture]

Fulton Implement Jack
- Painted gray. Includes base plate, handle and securing pin, zinc irridite plated. Mounts drilled in four places to allow jack to swing in 90 degree increments. 5000lb capacity, lift height 15 inches, handle is positioned on the side, 20 inch overall height, 16 inches center of mount to base. (Part No: ASJ515SH20)
$82.46 [Enlarge Picture]

Fulton Implement Jack
- Painted gray. Includes base plate, handle, securing pin, zinc irridite plated. Mounts drilled in four places to allow jack to swing in 90 degree increments. 5000lb capacity, 10 inch lift height, handle positioned on top, 15 inch overall height, 11 inches center of mount to base. (Part No: ASJ510TP15)
$39.95 [Enlarge Picture]

Fulton Implement Jack
- Painted gray. Includes base plate, handle, securing pin, zinc irridite plated. Mounts drilled in four places to allow jack to swing in 90 degree increments. 2000lb capacity, 10 inch lift height, handle mounted on top, 15 inch overall height, 11 inches center of mount to base. (Part No: ASJ210TS15)
$47.90 [Enlarge Picture]

HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$24.48 [Enlarge Picture]

Mower Deck Height Stabilizer Kit
- Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets, two lower brackets with chain and instructions. (Part No: MHSK1)
$26.84 [Enlarge Picture]

Ratchet Jack-Heavy Duty
- Use in place of hydraulic cylinder on many implements. Welded steel body. 1-1 4 inch diameter. NC thread both ends. 1 inch diameter clevis pins. 10, 000 lbs. push and 15, 000 lbs. pull capacity. adjustable from 20 to 28 inches. (Part No: SL1541)
$55.63 [Enlarge Picture]

Slope Indicator
- Accurate to less than plus or minus 1 degree. Oil in tube will not considerably change consistency from -40 to 170 degrees F. Dimensions are 3 inches x 6 1 2 inches. Includes brackets and mounting instructions. (Part No: SI7489)
$60.93 [Enlarge Picture]

Slope Indicator
- Oil in tube will not considerably change consistency from minus 40 to 170 degrees F. Indicator is accurate to less than positive or minus 1 degree. Dimensions are 1-3 4 inches x 3-1 2 inches. Includes brackets and mounting instructions. (Part No: SI7490)
$40.67 [Enlarge Picture]

Turnbuckle Implement Jack
- For use on implements requiring infrequent or fine adjustment. Replaces standard hydraulic cylinders. 20 inch closed, 30 inch open, 1-1 4 inch thread size, 1 inch pin holes. Painted red. (Part No: SL153)
$62.57 [Enlarge Picture]

Universal Stop/Fuel Shot off Cable
- 72 inch cable. Knob is red with 'STOP' printed on the face. (Part No: CC66)
$10.12 [Enlarge Picture]

Video Borescope, 5.5mm Probe Diameter, 2.4
- Kit includes 2.4" TFT LCD Color Monitor, 5.5 mm Probe, operates 8 hours on 4 AA batteries(Batteries Included).Comes In A Durable, Black Carrying Case. Has Video Output to View On TV Monitor.Useful For Inspection & Observation In Areas Not Visible By Human Eye. (Part No: PVB2455)
$523.88 [Enlarge Picture]

Video Borescope, 7mm Probe Diameter, 2.5
- Kit includes 2.5" Color Monitor, 39" video cable, 7mm Diameter Lighted Probe, Comes In A Durable, Black Carrying Case. Insertion Tube Resistant To Water, Oil & Weak Acid.Operates Over 3 Hours With 3 AA Batteries (Batteries Are Included) .Useful For Inspection & Observation In Areas Not Visible By Human Eye. (Part No: VB25)
$436.33 [Enlarge Picture]

Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$37.50 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$119.95 [Enlarge Picture]

 
Oil System
Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$12.93 [Enlarge Picture]

Oil Pressure Gauge
- Oil Pressure gauge. Fits most models with 2 inch gauge. Reads 0-80 PSI. (Part No: 911107)
$16.22 [Enlarge Picture]

 
PTO / Driveline
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1 2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1 16) bearing diameter x 74.6mm 2.940 (2-15 16). 1333mm (52-1 2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$164.92 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 6 spline Q.D. tractor yoke. 1-3 8 round bore with 1 2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16) overall length (43-3 4) . Verify length before ordering. (Part No: AB4111WY)
$183.74 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-1 4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R)
$181.20 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 - 6 spline Q.D. tractor yoke, 1-3 8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1 16) earing dia. x 74.6mm - 2.940 (2-15 16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33)
$278.82 [Enlarge Picture]

PTO Adapter
- I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA01)
$27.48 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 21 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inch, Length: 6.375 inch Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA08)
$23.25 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA09)
$35.25 [Enlarge Picture]

PTO Adapter
- I.D. 1.125 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 2.5 inches, Length: 4.625 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA04)
$24.34 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA05)
$16.23 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA06)
$24.20 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 21 spline female to O.D. 1.375 inch 21 spline male, Extends:4.125 inches, Length: 5.875 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA10)
$22.61 [Enlarge Picture]

PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA11)
$21.78 [Enlarge Picture]

PTO Adapter
- I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA12)
$63.18 [Enlarge Picture]

PTO Adapter
- I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA14)
$63.18 [Enlarge Picture]

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3 8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5 16 - 12 ORB. Outlets 1 1 16 - 12 ORB. Recommednded hose sizes 1 1 4 inlet, 3 4 outlet. (Part No: HC-PTO-1A)$876.56

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3 8 Shaft. 7.1 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5 16 - 12 ORB. Outlets 1 1 16 - 12 ORB. Recommednded hose sizes 1 inlet, 1 2 outlet. (Part No: HC-PTO-7A)$769.50

PTO Mounted Hydraulic Pump - For 1000 RPM 21 spline 1 3 8 Shaft. 23 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5 16 - 12 ORB. Outlets 1 1 16 - 12 ORB. Recommednded hose sizes 1 1 4 inlet, 3 4 outlet. (Part No: HC-PTO-3A)$769.50

PTO Overide Clutch
- Overide Coupler For 1 1 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C690F)
$56.86 [Enlarge Picture]

PTO Overide Clutch
- Overide Coupler For 1 3 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C680F)
$56.86 [Enlarge Picture]

PTO Overide Clutch
- Overide Coupler For 1 3 8" Female To 1 3 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C660F)
$44.94 [Enlarge Picture]

PTO Overide Clutch
- Overide Coupler For converting 1 1 8" Male To 1 3 8" Male, (Has 1 1 8" female at one end and 1 3 8" Male at the other)6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C670F)
$44.94 [Enlarge Picture]

PTO Safety Clutch, 40 HP
- 1-3 8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$210.57 [Enlarge Picture]

 
Paint
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$24.00 [Enlarge Picture]

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P)$44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP)$27.96

Dakota Prep & Shine, Twin Pack
- Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK)
$38.48 [Enlarge Picture]

Dakota Prep, 1 Gallon
- Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G)
$83.37 [Enlarge Picture]

Dakota Shine, 1 Gallon
- Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G)
$138.26 [Enlarge Picture]

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)$71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT)$29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP)$51.68

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)$27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

 
Safety
SMV Sign, Metal
- Slow moving vehicle safety sign, metal, center yellow orange triangle visable by day. Safety red border glows in headlight beams at night. Meets all state requirements, ASAE & SAE standards. (Part No: 6A60)
$11.50 [Enlarge Picture]

 
Seats
Bucket Style Seat & Frame
- Red Seat Cushion on a Black Frame. (Part No: BS100RD_)
$106.14 [Enlarge Picture]

Pan Seat
- Pan Seat 19 inch wide fixed with Nine Holes. (Part No: 8N400)
$43.04 [Enlarge Picture]

Pan Seat
- 19 inch wide Pan Seat - Flip over style. May come in a different blue than in picture. (Part No: C5NN400AE)
$42.09 [Enlarge Picture]

Pan Seat, Steel, Padded
- Padded steel pan seat. Two bolt mounting, 2 inch center to center. Three drain holes. Black leatherette upholstery.(TI) (Part No: TS1200)
$39.78 [Enlarge Picture]

Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865)
$36.96 [Enlarge Picture]

Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$75.84 [Enlarge Picture]

Seat, Universal INDUSTRIAL with SLIDES
- Seat, universal, non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1 4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND)
$70.15 [Enlarge Picture]

Tie-On Seat Cover
- Orange & White, 21 wide. Deluxe with 2 inches of foam. (Part No: R1012)
$42.53 [Enlarge Picture]

Tie-On Seat Cover
- Red & White, 21 wide. Deluxe with 2 inches of foam. (Part No: R1015)
$30.00 [Enlarge Picture]

Tie-On Seat Cover
- Green & White, 21 wide. Deluxe with 2 inches of foam. (Part No: R1016)
$36.00 [Enlarge Picture]

Tie-On Seat Cover
- Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014)
$36.00 [Enlarge Picture]

Tie-On Seat Cover
- Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Part No: R2600)
$30.00 [Enlarge Picture]

Tie-On Seat Cover - Black for 19 inch metal pan seats. (Part No: XYFR30BLACK)$30.09

Universal Folding Armrest Kit
- Folding armrest kit. For seats TS1030, TS1075, TS1085. (Part No: TS1075ARS)
$64.54 [Enlarge Picture]

Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015)
$172.58 [Enlarge Picture]

Universal Seat
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$93.40 [Enlarge Picture]

Universal Seat
- Dimensions: W-18 inches, H-14 inches, D-13 inches. Universal mounting hole pattern accomodates wide range of compact tractors. Includes mounting bracket(not shown). Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. Replacement cushion for TS1020 seat. (Part No: TS1000)
$84.82 [Enlarge Picture]

Universal Seat
- Dimensions: W- 15 inches, H- 14 inches, D- 15 inches. Universal mounting hole pattern accomodates wide range of compact tractors and forklifts. Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. No provisions for seatbelt attachment. (Part No: TS1010)
$77.69 [Enlarge Picture]

Universal Seat
- Dimensions: W- 18 inches, H- 14 inches, D- 13 inches. Special slotted base for mounting to wide range of compact tractors. Five position adjustable base for multiple seat angles. Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. Internal suspension, weight adjustable. (Part No: TS1020)
$217.61 [Enlarge Picture]

Universal Seat
- Non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 8-1 2 inches to 13-1 4 inches for mounting. Leatherette upholstery, vacuuum formed and watertight for use in all weather conditions. Folding armrests are optional (TS1080ARS). No provisions for seatbelt attachment. For use on forklifts, compact tractors, and skidsteers. (Part No: TS1030FLC)
$77.81 [Enlarge Picture]

Universal Seat
- Seat assembly with seatbelt and headrest. Internal suspension, weight adjustable. Backrest tilt adjustment. Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. Slide track for forward rear adjustment. Several mounting holes and slots in track and seat base are spaced from 9-1 2 inches to 13 inches apart side to side, and at various spacings from 4 inches to 11-5 8 inches front to back. For use on forklifts and construction equipment. (Part No: TS1035IND)
$140.49 [Enlarge Picture]

Universal Seat
- Scissor suspension with four springs and one shock absorber. Completely adjustable for weight, height, and forward rear position. Folding armrests are optional (TS1080ARS). Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1080SAT)
$265.55 [Enlarge Picture]

Universal Seat
- Dimensions: W- 19 inches, H- 15 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS95)
$67.32 [Enlarge Picture]

Universal Seat - Black Cloth
- Weight and height adjustment, with slide track for forward rear adjustment. Scissor suspension. Headrest, armrests and backrest with adjustable recline. Lumbar support. (Part No: TS1086BC)
$604.29 [Enlarge Picture]

Universal Seat - Black Cloth
- APS (automatic positioning system). Forward rear adjustment (7 inch range). Lumbar support adjustment, retracting seatbelt, folding armrests with adjustable height, 12 volt compressor controlled air suspension. (Part No: TS1090GR)
$861.90 [Enlarge Picture]

Universal Seat - Black Leatherette
- APS (automatic positioning system). Forward rear adjustment (7 inch range). Lumbar support adjustment, retracting seatbelt, folding armrests with adjustable height, 12 volt compressor controlled air suspension. (Part No: TS1090GRV)
$861.90 [Enlarge Picture]

Universal Seat - Leatherette
- Specially designed for cab tractors. Headrest, armrests, and backrest with 5 degree tilt adjustment. Lumbar support. Weight and height adjustment, slide track. Scissor suspension with 4 springs and 1 shock absorber. Reinforced poly holders for spring attachment. Double peg stop on seat slide position lock. (Part No: TS1085CAB)
$604.29 [Enlarge Picture]

Universal Seat Mounting Bracket
- For seats TS1000, TS1010. Contains all hardware for mounting 1-3 8" pin, 1-7 16" pin & 1-1 2" pin. (Part No: TS1010BRK)
$25.56 [Enlarge Picture]

Universal Seat, Black
- Dimensions: W- 20 inches, H- 14 inches, D- 15 inches. Leatherette upholstery vacuum formed over foam on a drawn steel frame. Cushion designed with an opening for positive drainage and ventilation. Universal tractor seat accomodates various mounting patterns. (Part No: TSA560)
$85.86 [Enlarge Picture]

Universal Seat-High Back (Black)
- Dimensions: W- 18 inches, H- 15 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS97HB)
$65.79 [Enlarge Picture]

Universal Seat-High Back (Yellow)
- Dimensions: W- 18 inches, H- 15 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS97HBY)
$65.79 [Enlarge Picture]

Universal Seat-Low Back (Black)
- Dimensions: W- 18 inches, H- 10 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS97)
$53.68 [Enlarge Picture]

Universal Seat-Low Back (Black)
- Dimensions: W- 18 inches, H- 10 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS97)
$53.68 [Enlarge Picture]

Universal Seat-Low Back (Yellow)
- Dimensions: W-18 inches, H- 10 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3 4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Part No: LGS97Y)
$53.68 [Enlarge Picture]

 
Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$24.00 [Enlarge Picture]

Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$30.09 [Enlarge Picture]

DZUS Fasteners Kit
- Universal Set of 5 fasteners. 1 4 Turn Fasteners. For 13 32 inch holes, Head Diameter is 11 16, springs are 1 7 8 inch in length. Verify size before ordering. (Part No: DZUS2)
$16.00 [Enlarge Picture]

Tool Box
- Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685)
$29.40 [Enlarge Picture]

Tool Box
- Universal tool box. Solid metal construction. 16 1 2L x 4 1 4W x 4 1 2D. Painted Blue. (Part No: R2675)
$29.40 [Enlarge Picture]

Tool Box
- Metal, Approx Dimensions: Width 11 inch, Depth 4 inch, Height 4 inch. Painted red primer. (Part No: 825633M91)
$31.59 [Enlarge Picture]

Tool Box, Fender Mount
- This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM)
$43.86 [Enlarge Picture]

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308)$37.50

 
Steering
Eaton Power Steering Pump Replacement - Replaces Eaton Style Belt Driven Power Steering Pump. Also replaces Eaton numbers 503-1005-005, 20928, P761. Redesigned pump uses a bearing instead of original bushing. Can be adapted to tractors using Char-Lynn Power steering with Easton Pump. Does not include brackets, or top mounted reservoir or pulley. Shaft diameter .670 inches. Shaft length (where pulley mounts) .575 inch diameter. There is a 2 inch thick pump housing where bracket bolts. Some applications will require a new pressure hoste to be made of 3 8 male inverted flare. Pressure is preset at 1.32 GPM (Part No: S03-1003)$319.35

Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$10.00 [Enlarge Picture]

Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$11.70 [Enlarge Picture]

Tie Rod Boot Assortment
- Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16" x 5 8" x 5 8", 1 15 16" x 3 4", 3 4", and 1 3 8" x 1" x 1 2". (Part No: TIERODBOOTS)
$15.30 [Enlarge Picture]

Wheelspinner-Ball Bearing
- Wheel Spinner, Black knob, Universal (Part No: WSV124B)
$9.70 [Enlarge Picture]

 
Tools
*Combination Wrench Set
- 22 pieces SAE Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1 4 thru 7 8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069)
$29.99 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Coarse
- Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Fine
- Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Medium
- Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549)
$17.48 [Enlarge Picture]

Adjustable Engine Cylinder Hone
- Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542)
$38.37 [Enlarge Picture]

Belt Measurer
- Measures 3 8, 1 2 and 5 8 fractional bels as well as A and B section industrial belts up to 110 inches. (Part No: B1SB9108)
$48.72 [Enlarge Picture]

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)$19.95

Blade Grinder
- Designed to be the most affordable blade grinder available. Features a totally enclosed standard-duty 1 2 HP motor which requires an arbor to mount the grinding wheel. • 1, 725 RPM and has a specially designed reversing switch which allows you to grind both right and left hand blades to a fine hollow grind. Quick guard removal for easy wheel replacement. This grinder comes with an 8" x 1" x 5 8" ruby wheel. (Part No: B1SB1735)
$699.76 [Enlarge Picture]

Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1 4" throat, 1 8" dia. rivet punch. (Part No: RIVET_TOOL)
$35.25 [Enlarge Picture]

Chain Breaker
- For use with #35, #40, #41, #42, #43 and #50 chains. Fast, simple method for taking apart rivet type roller chain. (Part No: B1SB1733)
$17.95 [Enlarge Picture]

Combination Wrench Set
- Set includes 22 combination wrences Standard and metric. Standard sizes 1 4 to 7 8 inches (11 pieces). Metric 6 to 19 MM (11 pieces). (Part No: 17398)
$42.89 [Enlarge Picture]

Combination Wrench Set
- 11 pieces. Sae sizes 1 4 to 7 8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061)
$21.00 [Enlarge Picture]

Compression Tester
- Up to 300# cylinder compression tester for use with 14mm and 18mm plug holes. (Part No: B1AC9036)
$58.95 [Enlarge Picture]

Compression Tester
- Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579)
$32.48 [Enlarge Picture]

Cotter Pin Assortment
- 150 Pieces. Contains sizes of 1 8x2, 5 32x2 1 2, 3 16 x 3, 1 4 x 2, 1 4 x 3, 5 16 x 2 1 2. All in a convenient re-sealable plastic case. (Part No: W5206)
$12.48 [Enlarge Picture]

Cotter Pin Assortment, Small
- 560 piece assortment of 1 16" x 1", 3 32" x 1", 3 32" x 1-1 2", 1 8" x 1-1 4", 1 8" x 2", 5 32" x 2-1 2" all in convenient re-sealable plastic case. (Part No: W5205)
$9.40 [Enlarge Picture]

Diesel Compression Test Kit
- Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy + - 2 percent. (Part No: W89731)
$59.95 [Enlarge Picture]

Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$36.11 [Enlarge Picture]

Disposable Gloves - Extra Large - 100 count box of Nitrile 5 mil. shop disposable gloves. 100% synthetic rubber. Provices superior resistance to grease, oil, diesel fuel, acids and many petroleum based products. Textured Fingers for secure grip. (Part No: PRM08186)$34.08

Disposable Gloves - Large - 100 count box of Nitrile 5 mil. shop disposable gloves. 100% synthetic rubber. Provices superior resistance to grease, oil, diesel fuel, acids and many petroleum based products. Textured Fingers for secure grip. (Part No: PRM08185)$34.08

Drill Bit Set
- 204 Piece Master Set in Quad-Fold Case. Includes 42 nitrate treated high speed steel drill bits, 51 titanium coated high speed drill bits, 8 brad point wood boring drill bits, 6 wood boring drill bits, 4-12 inch wood boring bits, 3 hex-shanck pilot bits, 3-12 inch masonry drill bits, 11 masonry drill bits, 10 power nut drivers, 20-2 inch power screw driver bits, 27-1 inch power screw driver bits, 3 nailsets, 1 center punch, 3 drill stoppers, 3 screw finders, 1-2.5mm allen wrench, 1-2 inch magnetic extension, 1 counter sink, 1 drill gauge, 4 holesaws, 1 holesaw arbor. (Part No: 16204)
$49.99 [Enlarge Picture]

GREASE GUN
- GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$28.88 [Enlarge Picture]

GREASE GUN
- Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$26.74 [Enlarge Picture]

GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$35.16 [Enlarge Picture]

GREASE GUN CLAMP
- Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102)
$12.44 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$109.95 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$270.05 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$376.87 [Enlarge Picture]

GREASE HOSE 12 INCH
- 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. Must order 2. (Part No: G115)
$10.86 [Enlarge Picture]

GREASE HOSE 18 INCH
- 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118)
$9.90 [Enlarge Picture]

Hair Pin Assortment
- 150 pieces. Includes 6 different sizes from 1 3 16 Length to 2 15 16. All in a convenient re-sealable plastic case. (Part No: W5210)
$8.32 [Enlarge Picture]

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S58474)$249.90

Heavy Duty Puller - 4 Inch
- Three Jaw Puller. Drop-forged and manufactured with heat-treated screws and floating screw center Points. Adjustable and reversible. (Part No: B1SB9020)
$33.39 [Enlarge Picture]

Heavy Duty Puller - 8 Inch
- Three Jaw Puller. Drop-forged and manufactured with heat-treated screws and floating screw center Points. Adjustable and reversible. (Part No: B1SB9022)
$66.34 [Enlarge Picture]

Heavy Duty Valve Spring Compressor
- Parrallel-Lift style Removes oil and grease seals with a two-sided hardened working head. Heavy-duty shaft and large comfort-grip handle. Overall Length 12 inches. (Part No: 900562)
$78.39 [Enlarge Picture]

Hobby Tool Kit
- With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709)
$23.74 [Enlarge Picture]

Hobby Tool Kit
- With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709)
$23.74 [Enlarge Picture]

Hose Clamp Assortment
- Total of 120 hose clamps from sizes 3 16 to 1 Inch. 20 each of 6 types sizes. (Part No: B1SB7204)
$59.23 [Enlarge Picture]

Hose Clamps Assortment
- 26 pieces. Includes sizes of: 5 8, 7 8, 1, 1 1 16, 1 1 4, 1 1 2 inch. All in a convenient re-sealable plastic case. (Part No: W5348)
$8.06 [Enlarge Picture]

Locking Plier Set
- 3 Piece set comes with one 5 inch, 7 inch and 10 inch standard jaw. Chrome vanadium steel. Comfortable TPR Getta-Grim handles. (Part No: 18450)
$38.99 [Enlarge Picture]

Locking Plier Set
- 3 Piece set comes with one 5 inch, 7 inch and 10 inch standard jaw and a 8 inch long nose and a 6 inch long nose. Chrome vanadium steel. Comfortable TPR Getta-Grim handles. (Part No: 18453)
$48.99 [Enlarge Picture]

Log Splitter - 5 Ton Electric. No gas, No oil!! Splits up to 21 inches. 110V 60 Hz. Input 1960w. Output 1500w. 12 amp. Weight 105 lbs. Portable (with wheels). (Part No: LS401005)$481.17

MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$24.76 [Enlarge Picture]

Main Seal Installer/Remover
- Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019)
$7.10 [Enlarge Picture]

Neway Valve Seat Cutter
- Hand Tool fits most air-cooled small engines. The valve seat reconditioning kit has a special cutting head with 31 and 46 degree angles. The cutter head adjustable to 1 11 16 inch cylinders. Includes blades, pilots, wrenches, pilot puller pin and comes in fitted tool case. (Part No: B1SB1742)
$416.80 [Enlarge Picture]

O-Ring Assortment
- 407 pieces. Includes 32 sizes from 1 4 O.D to 2 1 4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202)
$16.36 [Enlarge Picture]

Piston Groove Cleaner
- For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)
$24.95 [Enlarge Picture]

Piston Ring Compressor
- Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)
$35.67 [Enlarge Picture]

Piston Ring Compressor
- Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573)
$18.12 [Enlarge Picture]

Piston Ring Groove Cleaner
- Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1 16, 5 64, 3 32, 3 16 and 1 4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576)
$18.26 [Enlarge Picture]

Plier Set
- 4 piece Getta-Grip set includes 6 inch Diagonal Cutter, 7 inche Lineman's Pliers, 6 inch Slip-Joint and 6 inche Long Nose. Chrome vanadium steel with comfortable TPR Getta-Grip handles. (Part No: 18404)
$28.99 [Enlarge Picture]

Pull Hoist - 1 2 Ton heavy duty comealong. 12 foot lift capacity. (Part No: PP144)$92.11

Pull Hoist - 1 Ton heavy duty comealong. 6 foot lift capacity. (Part No: PP172A)$101.20

Rachet Set
- This set is 2 combination rachets. First rachet is 1 4 and 3 8 drive. Other is 3 8 and 1 2 drive. Unique combo-drive gives you two drive on each ratchet. Made of Chrome Vanadium Steel with easy grip handles. NOTE: Picture only shows one ratchet. (Part No: 11057-11058)
$47.95 [Enlarge Picture]

Ratchet Set
- This is a set of 3 Quick-Release Offset Ratchets. Includes a 1 4, 3 8 and 1 2 inch drive rachets. Chrome finish with easy grip handles. Top quality, geared for 5 degree ratchet increments 72-tooth mechanism. Off-set handles for confined areas. (Part No: 18025)
$49.99 [Enlarge Picture]

Ratchet Tie Down
- Pair (2) of 6 ft x 1 inch Pro Grip with hooks. Red. Capacity 1200 lbs. (Part No: B1312620)
$42.18 [Enlarge Picture]

Ratchet Tie Down
- Heavy Duty 27 x 2 inch Pro Grip with hooks. Capacity 3300 lbs. (Part No: B1310001)
$42.18 [Enlarge Picture]

Ridge Reamer
- Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$63.87 [Enlarge Picture]

Rotary Tool Kit
- 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083)
$19.00 [Enlarge Picture]

Rubber Grommet Assortment
- 125 pieces in 18 various sizes from 1 8 x 9 32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214)
$9.38 [Enlarge Picture]

Saw Chain Grinder - Midi Jolly Grinder. This compact, quality-built machine has the features and controls to provide a precise grind with professional results. It will sharpen virtually any "round cutter" chain type and size, including 1 4, .325, 3 8 and .404 pitches. • The vise angle guide is easily adjusted for cutter angles from 0 to 35. Features include an easy to operate cam-lever chain vise, cutter length adjustment, grind depth adjuster, on off switch, and t ransparent safety guard. • The brushless, single-phase 120v motor produces high torque at low rpm for long service life. Includes one grinding wheel for 1 4 to .325 pitch chains, wheel and chain pitch gauge, and a wheel dressin g brick. UL-approved. Arbor 4-1 8" x 7 8" Maximum RPM 5, 000 Weight 6 lbs. Dim D (4) 120V 60hz 85W 35A (Part No: B1SB4249)$294.32

Screwdriver Set
- 30 pieces. Contains 7 screwdrivers 1 4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718)
$23.08 [Enlarge Picture]

Socket Set
- 19 Piece with a combo 1 4 and 3 8 stubby rachet. Comes with 1 4 drive 1 4, 5 16, 3 8, 7 16, 5, 7, 8, 10 and 12 mm. 3 8 drive 1 2, 9 16, 5 8, 13, 14 and 15mm. 3 inche extension and 3 8 to 1 4 adapter. Comes in carry case. (Part No: 18019)
$27.85 [Enlarge Picture]

Socket Set - 21 Piece comes with slim design ratchet handle with 72 tooth ratchet mechanism. Made of Chrome Vanadium Steel, fully polished and chrome plated. 17 low profile sockets 3 8 to 3 4 and 10mm to 19mm. 1 4 and 3 8 drive quick-release conventional socket adapters, 3 inch extension and storage case. (Part No: 17400)$48.22

Socket Wrench Set
- 52 pieces. Includes 1 8, and 1 2 inch drive rachets, 1 4 inch drive spinner handle. Complete sets of SAE and Metric 1 4, 3 8 and 1 2 sockets and associated tools. Sockets range from 5 32 to 7 8 and 4 to 22 mm. Polished chrome all in a handy plastic case. (Part No: W1172)
$24.00 [Enlarge Picture]

Spark Plug Thread Heli-Coil Repair Kit
- Includes Heli-Coil Reamer Tap; Heli-Coil Installation Tool; (6) 3 8 inch Reach Thread Repair Inserts; (6) .472 inch Reach Thread Repair Inserts; (6) 1 2 inch Reach Thread Repair Inserts; 12 3 4 inch Reach Thread Repair Inserts. The repair kit insersts are used to repair tapped holes which have been stripped or damaged due to sear, corrosion and over-torque. The are available in M12 and M14 sizes for any engine. (Part No: B1552314)
$270.27 [Enlarge Picture]

Spark Plug Thread Heli-Coil Repair Kit
- Includes Heli-Coil Reamer Tap; Heli-Coil Installation Tool; (12) 1 2 inch Reach Thread Repair Inserts; (12) 3 4 inch Reach Thread Repair Inserts. The repair kit insersts are used to repair tapped holes which have been stripped or damaged due to sear, corrosion and over-torque. The are available in M12 and M14 sizes for any engine. (Part No: B1552312)
$176.03 [Enlarge Picture]

Spring Assortment
- 200 pieces. Includes compression type sizes from 9 32 x 1 2 to 7 32 x 1 1 2, extension type from 13 64 x 13 16 to 11 32 x 1 7 16. (Part No: W5200)
$7.98 [Enlarge Picture]

Step Drill Bit Set
- 3 Pieces. Titanium Nitride Coated high speed steel. 1 4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003)
$17.20 [Enlarge Picture]

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3 32, 7 64, 1 8, 9 64, 5 32, 3 16, 7 32, 1 4, 5 16 and 3 8 inch. Comes with hand storage rack (mountable). (Part No: W80274)$19.94

Tape Measure set
- Includes 4 Getta-Grip Tame measures of 12, 16, 25 and 33 ft lengths. Ihigh Impact Plastic Cases, Ergonomic Handles, quick read markings. (Part No: 17500)
$23.45 [Enlarge Picture]

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)$42.82

Torque Wrench - Micrometer 1 2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB)$34.40

Valve Grinder
- For small engines. Complete, versatile tool for lapping and grinding valves in seats. Short locking stems and valve head insert end for both. Equipped with spring and vacuum cup for lapping. (Part No: B1SB9050)
$25.95 [Enlarge Picture]

Valve Refacer
- Carboloy cutter to service hard-steel valves for small engines. (Part No: B1SB1726)
$38.69 [Enlarge Picture]

Valve Refacer Cutter Blade
- Rectangular Block. (Part No: B1SB1743)
$18.95 [Enlarge Picture]

Valve Spring Compressor
- For small engines. Exclusive valve lifter frees both hands while lift wedge eliminates use of screwdrivers. Made from rugged steen construciton for durability and designed to fit all cycle engines. (Part No: B1SB9033)
$45.18 [Enlarge Picture]

Valve Spring Tool
- Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567)
$31.24 [Enlarge Picture]

WIRE STRIPPER 4-WAY
- 4-way wire stripper crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$9.88 [Enlarge Picture]

Wire Terminal Assortment
- 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213)
$15.48 [Enlarge Picture]

Woodruff Key Assortment
- From sizes of 3 32 x 3 8 to 1 4 x 7 8. Total of 250 pieces in 13 sizes. (Part No: B1SB6)
$44.51 [Enlarge Picture]

Woodruff Key Assortment
- 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341)
$11.26 [Enlarge Picture]

Zerk Fitting Assortment
- Contains 70 pieces. 1 4: Straight, 90 and 45 degree. 1 8: Straight, 90 and 45 degree. Metric straight, 6mm, 8mm, 10mm. (Part No: W5215)
$13.76 [Enlarge Picture]

 
Wheels
Front Tractor Tires
- We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: FRONT_TIRES)
$0.00 [Enlarge Picture]

Rear Tractor Tires
- We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: REAR_TIRES)
$0.00 [Enlarge Picture]

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)$42.82

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Valve Fluid Adapter
- For ballast. (Part No: S.61167)
$27.90 [Enlarge Picture]

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3)$74.22




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.