(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

3 Point Hitch Conversion Kits

Increase Your Tractor's Use & Value!

Bring Your Tractor Up-To-Date At A Cost Far Below A New Tractor!

Manufactured by WORKSAVER, INC.


Features
  • Ruggedly constructed
  • Adjustment for various lifting heights
  • Category I & II implements can be used on some kits
  • Turnbuckle lift arm adjustment on both sides
  • Flexible, yet adjustable for rigidity
  • Lock nuts for positive adjustment hold
  • Screw-type Top Link with plenty of adjustment
  • Instruction manual and repair parts list with each kit
  • Heavy duty ball-type sockets
  • All standard 3-point mounted equipment will fit

Outstanding Advantages
  • Easy to install or remove from tractor
  • Provide power lifting and lowering of equipment
  • Save time and labor - make hookups quickly & easily
  • Make tractor easier to use in cramped quarters
  • Simplify changing from one piece of equipment to another
  • Added weight makes for better traction
  • Tractor can use more implements
  • Increases value of tractor
These are the highest quality 3-Point Conversion Kits on the market.

[ Show All Pictures ]
 
Hitch / Drawbar
3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: WD and WD-45 - Cat. I II (Use original swinging drawbar)Weight is 175#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK305)$749.00 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D14, D15 - Cat. I II (Use original swinging drawbar). Weight is 175#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK306)$1003.32 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: CA - Cat. I (Swinging drawbar included). Weight is 120#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK307)$1173.15 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: B, C - Cat. I (Hyd. cylinder and hoses included.)(NOTE: Tractors must be equipped with hydraulic pump and standard drawbar - parts available from used parts companies if needed.) Weight is 110 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK308)$726.52 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series I-III - Cat I II (Use original swinging drawbar.) Weight is 205 Lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Typical freight is $100.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK315)$1009.73 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series IV - Cat I II (Use original swinging drawbar.) Weight is 175 Lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK317)$991.58 [Show Picture]

2 Point Conversion Kit - Easy on and off in just a few minutes. 26" spacing between lift arms. For IHC FARMALL 300, 330, 340, 350, 450, 460, 560 (With exposed round rockershaft) (Note: Check tractor model. Utility models require a different toplink bracket. See HK-826, HK-1126, or HK-1132). Weight is 70 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ALLOW 2 TO 4 WEEKS DELIVERY TIME. (Part No: HK126)$379.23 [Show Picture]

2 Point Conversion Kit - For IHC Farmall Models: 300, 330, 340, 350, 450, 460, 560 and other models with exposed round rockershaft.(Not for 460 or 560 utility models.) Easy on and off in a few minutes. Converts 2 point fast hitch to standard 3 point. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Cat.II, 32" spacing between lift arms. Weight is 70 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK132)$340.03 [Show Picture]

2 Point Conversion Kit - For IHC Farmall 240. Easy on and off in a few minutes. Converts 2 pt. fast hitch to standard 3 pt. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". (Top link bracket replaces casting at top rear of Tractor or belt pulley housing.) 3" prong.Weight is 67 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK226)$395.00 [Show Picture]

2 Point Conversion Kit - For IHC Farmall C, Super C, 200, 230 (2 AND 1 2" prongs.)Easy on and off in just a few minutes. Converts 2pt. fast hitch to standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive 'Snaplock' linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 67 lbs. * This item dropped shipped from mfg. Allow 2-3 week for delivery.* Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK326)$404.44 [Show Picture]

2 Point Conversion Kit - For IHC Farmall 544 and 656. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional Shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK426)$437.40 [Show Picture]

2 Point Conversion Kit - For IHC Farmall 544 and 656. Easy on and off in just a few minutes. HK-432 is similar to HK426 but Cat. II angled lift arms are provided. Converts 2pt. fast hitch to standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32". Weight is 77 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK432)$409.72 [Show Picture]

2 Point Conversion Kit - For IHC Farmall 240. Easy on and off in just minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt and 3pt. equipment can be used.Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.I 26 inch. (For models with 3 holes on rear housing of mount 5x5.5 flat plate top link bracket.) (Note: check tractor - model 240 was built two ways, see HK226.) Weight is 67 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. Allow 2 - 4 weeks delivery time. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK526)$357.98 [Show Picture]

2 Point Conversion Kit - For IHC Farmall Models: 706, 756, 806, 826, 856, 1206 and others. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates.Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK626)$363.26 [Show Picture]

2 Point Conversion Kit - For IHC Farmall Models: 706, 756, 806, 826, 856, 1206 and other models. HK-632 is similar to HK626 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.II 32 inch. Weight is 77 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. Please allow two weeks for delivery. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK632)$391.77 [Show Picture]

2 Point Conversion Kit - For IHC Farmall Model: 606. Easy on and off in just a few minuted. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 70 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK726)$374.88 [Show Picture]

2 Point Conversion Kit - For IHC Farmall Model: 606. HK-732 is similar to HK726 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32 inch. Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK732)$391.77 [Show Picture]

2 Point Conversion Kit - For IHC Farmall 404, 504 and some 300, 350 models. For all 300, 330, 340, 350 and 574 utility models. Easy on and off in a few minutes. Converts 2pt fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.I 26 inch. For IHC Farmall 404, 504 and some 300, 350 models. For all 300, 330, 340, 350 and 574 utility models. (Rockershaft not exposed or not round.) (3 threaded holes on rear housing.) Weight is 69 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK826)$368.54 [Show Picture]

2 Point Conversion Kit - For Farmall 400 ROW CROP. (With no exposed rockershaft.) Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1026)$456.19 [Show Picture]

2 Point Conversion Kit - For IHC 460 and 560 Utility models. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2 pt. and 3 pt. equipment can be used.Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 68 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1126)$368.54 [Show Picture]

2 Point Conversion Kit - For IHC 460 and 560 Utility models. HK-1132 is similar to HK1126 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2 pt. fast hitch to Standard 3 pt. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32". Weight is 69 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1132)$386.49 [Show Picture]

3 Point Conversion Kit - For IHC Farmall Model: Standard Cub - Cat. 0 I (Not for Lo-Boy or Cadet Lawnmower)(Uses existing hydraulic lift).Weight is 125#.m Additional Shipping Charges apply call 1-800-853-2651. Typical Freight is additional $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK90)$772.99 [Show Picture]

3 Point Conversion Kit - For IHC Farmall Model: Cub Lo-Boy - Cat. 0 I (Uses existing hydraulic lift)(Not for 154, 184, 185 models) (Not for Cadet Cub Lawnmower)Picture is not exact but hitch is similar.Weight is 124#. Additional Shipping Charges Apply. Call 1-800-853-2651. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK91)$784.60 [Show Picture]

3 Point Conversion Kit - For IHC Farmall Models: Super A, 100, 130, 140 - Cat. I With standard pull-type drawbar (Uses existing hydraulic lift).Weight is 80#. Additional shipping charges apply. Call 1-800-853-2651. Typical Freight is $80.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK95)$576.27 [Show Picture]

3 Point Conversion Kit - For IHC Farmall Models: 100, 130, 140 - Cat. I (With IH 1-pt. fast hitch) (Uses existing hydraulic lift).Weight is 65#. Additional shipping charges apply. Call 1-800-853-2651 for rate. Typical freight is $80.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Same as HK95 except does NOT come with vertical arms. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK96)$443.52 [Show Picture]

3 Point Conversion Kit - Three Point Hitch for IH Farmall Models: C, Super C, 200, 230 - Cat. I (Uses existing hydraulic lift).Weight is 190#. Additional charges apply. Call 1-800-853-2651 for rates.Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK102)$1009.73 [Show Picture]

3 Point Conversion Kit - For use with ONE hydraulic cylinder.For INTERNATIONAL HARVESTER Models: H, M, MTA, Super H, Super M, Super MTA, MD, 300, 340, 350, 400, 460, and 504 - Cat. I II (Requires one 3" x 8" hydraulic cylinder.) *Hydraulic cylinders and hoses are not included. Weight is 237 Lbs. Additional shipping charges apply. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1106)$977.81 [Show Picture]

3 Point Conversion Kit - For use with TWO hydraulic lift cylinders (not included. For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188.(Requires two hydraulic cylinders)which can be purchased separately as part #308DU (Order optional bracket #861190 to use swinging drawbar) Cat. I II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. Additional shipping charges apply. Typical Freight is 100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK11062)$1022.40 [Show Picture]

3 Point Conversion Kit - For Farmall 400 Row Crop (With no exposed rockershaft.) HK-1032 is similar to HK1026 but Cat. II angled lift arms are provided. Ruggedly constructed. Cat.I and Cat.II implements can be used. Screw type top link with plenty of adjustment. Heavy duty ball type sockets. Adjustment for various lifting heights. Turnbuckle lift arm adjustment on both sides. Easy to use 7 16" spring type linch pins. Lock nuts for positive adjustment hold. 1-1 8" threaded stubs on adjustable links. Instruction manual and repair parts list with each kit.(DOES NOT INCLUDE DRAWBAR.) Cat.II 32". Weight is 74 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1032)$478.36 [Show Picture]

3 Point Conversion Kit - For models 50, 60, A, B, G, 70. Cat. I II If tractor is A SN# 561903 and below or a B 186134 and below or a G 18700 and below: a later model drawbar support bracket must be installed. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. (Part No: HK203)$903.07 [Show Picture]

3 Point Conversion Kit - For John Deere Models: M & MT (Fixed 26" spacing) - Cat. I.Weight is 90#. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $80.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK201)$457.96 [Show Picture]

3 Point Conversion Kit - For John Deere Models: 520, 530, 620, 630 - Cat. I II Weight is 134#. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK202)$830.01 [Show Picture]

3 Point Conversion Kit - For Oliver models 66, 77, 88, Super 66, Super 77, Super 88, 660, 770 (Uses one Hydraulic Cylinder - NOT included)(Use original swinging drawbar.)Weight is 242 Lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is 100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1678)$1248.00 [Show Picture]

3 Point Conversion Kit - For Oliver Models 77, 88, Super 77, Super 88, 660, 770 and 880. HK-16782 is similar to HK1678 but has two cylinder locations. Uses two Hydraulic cylinders - NOT included(Use original swinging drawbar)Weight is 265Lbs. Additional shipping charges apply.Call 1-800-853-2651 for rates. Typical Freight is 100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK16782)$1247.04 [Show Picture]




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.