Posted by John T on June 22, 2013 at 05:36:54 from (216.249.76.176):
In Reply to: Jphn Deere M posted by Karl Schubert on June 19, 2013 at 04:07:16:
I dont know what sizes Deere originally used, but can tell you what will "work"
Id use insulated stranded copper wire, of course, in these gauges.
Id use 12 for the charging circuit, ARM on Genny to GEN/ARM side of Cutout Relay,,,,,,Bat from relay to Ammeter load side,,,,,,,,Ammeter Supply side to where big cable attaches to starter post.
Id use 14 gauge for all the rest (Ignition and lights etc) except battery and Ground cables, of course, where Id use 0 or 1 gauge.
It wont hurt if you used 12 everywhere even though 14 would suffice for ignition and lights etc
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.