ASEguy said: (quoted from post at 06:00:57 08/26/12) My throttle valve was completely stuck on my 8N and I was faced with your dillema. I bought a gallon of carb cleaner from the auto parts store, disassembled it as best as I could an soaked it for two weeks. It cleaned up really nice and works well with a new kit and the throttle shaft freed up too. Patience is the key. Hope this helps. Gerard
The dip type carb cleaner will not clean out stopped up passages in a JD 2 cyl. carb. Only a drill bit of the correct size will do it. Do your self a favor and send it to PopinJohn carb repair. (google is your friend) They'll do it right for cheap money compared to others.
The people who own this site also do the rebuilds.
This post was edited by Dodgeit at 13:00:21 08/27/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.