Posted by MF Guy on March 26, 2012 at 19:17:07 from (64.22.61.101):
In Reply to: Re: super 90 posted by Carl Lefever on March 24, 2012 at 05:27:07:
The rear seal old Massey part number was 187631M1 and the new Masseyt number is 744946. This seal is available from any Massey dealer. You may be able to take the part number to a NAPA store and have them match it up for you. To change the seal, you will probably have to remove the rear cover that holds the PTO shaft from the rear end. You will need to drain the oil from the transmission/rear end - its all the same oil. A tip is to park the tractor on a down hill slope so you only have to remove part of the oil. You can see a parts diagram by going to agcopartsbooks.com and clicking on "view books" in the "Guest" box. Enter Super 90 for model number and choose Massey Ferguson for brand. It will bring up a parts book for the tractor. Hope this helps.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.