Posted by PretendFarmer on September 16, 2013 at 12:30:32 from (192.249.47.207):
In Reply to: FRT WT FOR FARMALL M posted by DWCYour Handle on September 16, 2013 at 10:57:40:
Its not an M but the way I made my front bracket for my H is get 3 or 4" angle iron and cut them into 20" or so lengths. Drill two holes in them and bolt them onto the front of the tractor. You will need to notch them as you want the L to face inward. Then cut a section of your angle iron to fit in between them to connect them together. That L will face toward the front of the tractor. That is where you would want to hang suitcase weights. With the "L" facing inward on all 3 pieces, you create somewhat of a cradle and you can stack blocks of concrete in there as weights and put all your suitcase weights on the back.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.