Posted by CNKS on April 09, 2014 at 18:16:15 from (12.170.61.29):
In Reply to: Re: Mp 170 as a sealer posted by newgenjdcollector on April 07, 2014 at 18:06:46:
"You can't do that with a normal coat of epoxy." The MP 170 sheet says you can topcoat in 30 minutes. I have done that many times. True that is difficult for me to both prime and topcoat a large tractor in the same day. I usually topcoat the next day. Then I do all the parts I have removed and topcoat the parts I have removed and topcoat them the same day, over a period of days. There is no reason to use a thin coat of epoxy on the chassis, If you have a 3 day window as MP 170 does, and you are not ready to topcoat, you can apply another coat and have another 3 day window, as for as I know, but why? Unless you are very short on time, I would topcoat the chassis (3 coats) instead of applying more epoxy.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.