I would advise against using All You Need. It is nothing but spray able body filler. It is not moisture proof and it's way too hard to sand. I've used it many times along with the yellow Z Chrome primer...both are made by Clausen. A good epoxy will provide moisture resistance, adhere better,and flow out smoother. All you need leaves a textured finish and it's hard too sand out. I usually knocked it down with 180 and then water sand with 400. I have seen it crack after a year or two also, and once I got bad hardener with mine and it wouldn't set up and I had to scrape it off. Another thought for you is if you painted that stuff outside and the gray All You Need ive used looks almost black, I would say the panels were heated up before you sprayed them to where the paint flashed as soon as it hit the panel and didn't flow out. Using medium reducer didn't help that any either.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.