I doubt if this will solve your problem, but IH makes a hardener for their paint -- parts man may say no. CaseIH also has a reducer, always best to use products by the same manufacturer if possible. It seems that the ratio should be 8:1 without hardener and 4:1:1 with hardener, but I use urethane exclusively, so I have not used the CaseIH paint. Toss the lacquer thinner and use wax and grease remover made for the purpose. The wax and grease remover is the last step. If you use soap and water use it before the wax and grease remover. Sometimes things go wrong for no known reason, a little unusual that it occurred with CaseIH. I assume you are using an HVLP gun. Set the regulator on the gun wide open to keep from accidentally moving it while painting. Set the pressure with the regulator on the wall. Set it at the max pressure as stated on the gun or in the instructions. You do not need to deviate from that pressure. I prefer epoxy primer, it is the best available, if you don't use it then use the CaseIH primer. I don't know if you are showing the texture in the pictures or not, I don't see anything.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.