Posted by B-maniac on February 06, 2013 at 14:16:52 from (75.134.117.86):
In Reply to: Paint Questions posted by Christos on February 06, 2013 at 07:59:35:
Between the big three (Dupont/PPG/BASF) it is th Chevy/Ford/Dodge thing you elude to but each also has their sub models and it is more important that you use a very knowlegable supplier to make sure you are in fact comparing apples to apples as far as the actual system and the technology behind it. Is it industrial urethane , urethane , acrylic urethane , acrylic enamel , acrylic modified enamel , synthetic enamel and then single stage or base cote clear cote. Then is it two part epoxy primer , two part acrylic urethane primer , self etching primer and what exactly are they specifying for respirator? Now that you are thoroughly confused you can see why it is paramount that you get a very knowlegable supplier and NOT just the best "salesman". Keep asking questions and getting opinions until you are completely satisfied that you have what is right for your tractor and priorities you have for it's appearance and intended use. I use PPG because they were ahead of everyone back in 1985 when base/ clears and pearl cote paints came out and also because even now that everyone has cought up , I still have the same guy running the store as back then. He knows what he's talkin about and he knows I am fussy! It works for me. By the way, "industrial" doesn't always mean better looking OR longer lasting. Sometimes just means a compromise paint that fits the volume and price constraints of a high volume factory. They usually don't have the DOI (distinctness of image) or flat shine of automotive paint. Machinery needs "orange peel" to hide metal/welding and warping flaws and mill flaws in metal and resist runs from less than skilled painters and therefore will not flow out flat as good as non-industrial paint. Clear as a mud, right???
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.