Posted by Brent in WI on October 20, 2012 at 17:23:21 from (68.113.232.205):
Started painting the John Deere today and that actually painted fine and in between coats I started painting the sheet metal with the same paint and it would not level at all creating a severe orange peel. The tractor was sandblasted, wipe down clean and then primed with epoxy primer and looks pretty good. Most of the sheet metal was sandblasted and primed the same way and I also had some pieces that we previously painted a few years ago but had a few runs so they were wet sanded, washed cleaned and dried with a lint free cloth. I used hardener for sythetic paints and just a little reducer like the can recommends. Looking for any suggestions. I'm also at a point of buying some more expensive paint for all the sheet metal but how do I get the paint to match up? Any reccomendatiosn would be much appreciated. Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.