Posted by glennster on March 13, 2012 at 03:44:50 from (99.90.9.153):
In Reply to: What Kind of sander posted by Marty Scher on March 09, 2012 at 17:55:02:
for body work using filler, an air file and a d/a would be your best choice. however, if your on a budget, a good orbital type electric sander would get you by. for major filler work ie "bondo" pick up a long board manual sanding block. you will need to level the filler with 36 grit, then a second thin filler application, hit it with 80 grit on the long board to check for any high spots, then use a small hand block for final shaping. after that, use 120, 220, then 320 on the electric orbital for final finishing before priming and painting. a sure form cheese grater is also handy to shape the initial filler application. work the filler right after it sets up before it gets hard as concrete, its a lot quicker to sand.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.