Re: Re: Re: Re: Re: Satoh Bison S 650 G Tractors

Posted by Porcupine on October 04, 2005 at 10:04:30 from (198.103.96.11):

In Reply to: Re: Re: Re: Re: Satoh Bison S 650 G Tractors posted by J on April 24, 2001 at 12:52:36:

Satoh Agricultural Machine Mfg. Inc

Parts for Satoh tractors are available at Stull Power 800-229-7885. Happy Hunting!
North American Distributor: SATOH
Stull Enterprises
Koraopolis, Pennsylvania, USA
Phone: 412-262-1405 701 Fax: 412-262-0826

For a manual and maybe parts - homestd@ix.netcom.com

Parts can be bought from Gudorf Lawn-Garden & Farm Equipment in Jasper, Indiana. Phone number 812-634-5105

Satoh was bough out by Mitsubushi. The Case International compacts from the 1980's are basically the same tractor. Some Case IH dealers carry parts for the tractors.

The Satoh 650 would have been built in the 70's. They were built by Mitsibshi. Part can be obtained from Hayward Distributing Company, 614-272-5953.

We carry Satoh parts for most models. If you would like a quote, e-mail us or give us a call toll free at (866) PICK-SGT.

check the satoh board
www.antiquetractorsonline.com/
free message boards (about 3/4 of the way down on the main board)

http://www.atis.net/salyards.shtml try looking here

there is a John Deere dealer in Port Orchard, Washington who sells gray tractors and will mail Satoh parts all around the country and often does.
The company is Penninsula Feed. The contact person is Doug.

looking for satoh parts
shuey onoho satoh still has them. there phone
1 717 865 4915
fax 1 717 865 4893

TRY ALDERSONS
724-352-1081
I UNDERSTAND THEY HAVE A FEW PARTS MACHINES
OR TRY
ANTIQUE TRACTORS ONLINE
THEY HAVE A SATOH BOARD

satoh message boards at 2 sites:
www.antiquetractorsonline.com
TractorByNet.com
both have lots of info, just read down threw some of the postins & you will see tune up part #'s

call Shuey's Sales Service for S650G Parts

HELLO'
HAD THESE NUMBERS PASSED TO ME, CAN GIVE THEM A TRY.
VOLAGE REG. TRANSPO IM952(LATE 70'S MITSU./MAZDA)
ALT # 14194 FORD CURRIER 71-80
HOPE THIS HELPS.
ROB

satoh g650
carb is Stromberg model 210028-062

Tim, I have the same tractor and the plate you speak of was on mine as well. My manual doesn't actually make reference to it, but, as a WAG I would have to believe it is in there for valve to piston clearance. My manual has the torque at 47-51 ft/lbs. Valve clearance is .010 inch. for both intake and exhaust. Hope this helps.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]