Well we hooked up a gauge to the oil filter housing and ran it. It won't even budge the needle. Went out to my 77 and have 19 pounds at start up. So since the 77 has a rod knock and has to come apart anyway (just didn't want to do it now) I'm gonna take the pump out of that and put in the 88. That way we can rule out the pump that's in the 88. Speaking of oil pumps we pulled my 880 out of the weeds that I bought a couple weeks ago to rob that pump (motors tight) only to notice that there is no oil pump in it at all, lovely. Did the pump swap and still no pressure. Thinkin it must be the plug behind the cam gear now. Went and looked at a spare block I have and see where the plug should be. I bet that is not in my block. Time to tear it all back down tomorrow night
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.