Posted by J. Schwiebert on March 28, 2013 at 19:16:57 from (209.143.33.147):
In Reply to: 1755 engine problems posted by young tractor on March 28, 2013 at 18:23:14:
When the 1800 B series would do that there was a double problem. Worn main bearings would let oil pass by the sleeve sealing O-rings. What I would do first is drain the oil pull the pan rig or a bearing leak detector and see how much oil passes by the main bearings. Part 2 would be fill the cooling system with antifreeze. pressurize it and see if you have any leakage. We have an IH in the shop at the minute that dumped some coolant in the pan. As long as the tractor was inside the shop it would not leak, set it outside overnight at about 20 degrees and we had pink snow in the morning. One of the O-rings on #5 sleeve leaked. Questions. Head bolt torque and valve settings are not the same as for your 310 (1850) gas.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.