I spun a main brg.The crank needs work and one new sleeve on that hole.To do it right I think I should sleeve all 6 or pistons on the other five.It needs new valves and injector cups.The head and block are fine.Oil pump seems ok.If I replace all 6 with new pistons and sleeves I am looking at $3200.00.This does not include new oil pump(extra $395.00. Thank you for the answers.
The used tractor was new to me and used oil.I neglected to check oil on a busy summer and was working it hard pulling a belly dump from a ditch.I was on a side hill and low on oil.
After tear down I discovered blow by,1 or 2 exhaust ports 3/4 plugged with carbon.I think the engine was ready for overhaul.Some say not to weld a diesel crankshaft.The machine shop its at,say he has no problem. Any more info would be appreciated. Steve
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.