Posted by J. Schwiebert on January 24, 2013 at 19:17:36 from (209.143.54.246):
In Reply to: Re: 60 Oliver row crop posted by LaRay Vanderpool on January 24, 2013 at 14:26:51:
You need 10 under bearings.When a crank is ground the bearings need to be undersize because the mains and crank pins are now undersize. The rod bearings are the same as for a 66 or 77 Fleetline tractor. For the main bearing set you will need to have a couple of oil holes relocated. Now the thrust on a 60 only has a flange on one of the shells. . There are several ways you can do this. Wait till tomorrow and I will get you both the Clevite and the F-M bearing numbers. Any other questions? We have a 60 engine apart at work right now so I can look if I need to.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.