Posted by Davy Fireball on July 12, 2014 at 07:38:26 from (207.177.103.68):
In Reply to: Which Boom Pole? posted by carpetfarmer on July 08, 2014 at 05:10:47:
Mine is made from square tubing I welded a plate to a boat winch.Then I clamped it to the boom. That way the tractor is unaffected by the weight. If I want to pull a post or lift something heavy I drive the tractor up to it shut off tractor and just pick it up. IF it is too heavy I put a pulley block on and turn a 1500 lbs winch into a 3000lbs lift. Will the tractor come off the ground YES but its not running and you have control of it with the hand operated boat winch.
This post was edited by Davy Fireball at 07:39:57 07/12/14.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
