Posted by Angus Thom on June 14, 2014 at 20:07:47 from (70.94.58.177):
Apologies - this is possibly the wrong list - but, it is pulled behind a 52 8N, 6v, side mount & I read this list daily - so does that count?
I've a Land Pride AT2572 finish mower. I hit an obstruction and the center blade has stripped the threads inside its spindle - I removed the blade hub (under the deck) expecting to then simply lift the drive pulley & shaft out of the hub and its two bearings. But it won't move. I've tried some vertical assistance w/ hammer etc... nada.
Now contemplating physical assault on the lower bearing (heck - its the only available target!). I'm probably missing something obvious. How do I replace the spindle?
Basically trying to replace part #47 on page 28 of www.landpride.com/ari/attach/lp/public/manuals/310-002p.pdf
Help? Advice? (or - redirection?)
On a more on topic question - can anyone recommend an 8N shop in the Kansas City MO area? I've had my 8N for some 25 years and while she only mows or brush hogs for some 30 hours a year . . . and I do have some mechanical smarts.. and fixed bits & pieces & oils & filters etc over the years . . . I know that she's approaching an age that deserves some more professional TLC.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - It Can't Be Done! - A Tractor Story - by Neil Campbell. I'll never forget the time back when I was a boy baling hay on our Farm in Big Rapid, Michigan. The most memorable event that took place was a trip up the steepest incline on the farm pulling an old New-Idea baler with a pony-motor for power and a haywagon. I had just talked my Dad into buying an old John Deere B with 6-speeds ahead and I was real proud of it, except it was a little smaller than the Case tractor that we normally
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.