you wont kill yourself, but that being said, theirs more to it than just sharpening, first what is the brush hog mowing? if your mowing mostly grass, you can sharpen the blades up sharp like a lawn mower and they'll do a nice job on grass, but they wont do well if your mowing brush and small saplingts, for that they need to have a semi sharp edge so they]ll shatter the brush stumps and help prevent regrowth, then next thing is what do you have to sharpen the blades with? i use a bench grinder once in awhile with the blades each removed from the carrier, but for most general sharpening a small right angle grinder works well, if you get a grinding disc so you can use the backside of it to gring the top of the blades, some brush hogs will not allow this due to their design, and you must remove the blades to sharpen every time, some will let you get a grinder up in there and use it, block the brush hog up so it cant fall on you, if its hooked to the tractor a pair of good quality jack stands will work fine, then block the pto shaft so it cant rotate i hold the blade with one hand and run the grinder with the other, it takes some practice, if your not feeling safe doing that way just remove the blades to sharpen them
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.