The effectiveness of dry ice in removing paint depends on the thickness of the paint layers. If the layers are thin and the type of paint isn't tough, the dry ice can remove the substance at a rate of 300 square feet per hour. Thick layers created from tough types of paint may be removed at a rate of one square foot per hour. Some paints can be more difficult to remove than others and may leave traces of the paint behind. It takes about five pounds of dry ice per minute. This restricts the types of jobs that can be completed because there would be too much time and expense. Dry Ice Blasting
Dry ice blasting is used mostly for stripping paint from vehicles and even airplanes. To start the operation, set the blaster at the lowest level before pouring the ice pellets into the reservoir. The pellets will be converted into dry ice and come out of the machine as a vapor once you begin the paint removal.
Hold the blaster over the surface that needs to have the paint removed and gradually increase the pressure as the paint starts to disappear. Move the blaster nozzle back and forth slowly over the area to ensure that all of the paint is removed. Safety
Although technically, the dry ice blaster is the safest way to remove paint, there is always a danger with any equipment that uses pressure. Wear goggles and heavy gloves for protection.
Never start the device on high pressure. It doesn't matter how many times you have used this type of blaster, all surfaces react differently and you could damage the surface you are removing paint from. You could also be caught off guard if you are not ready for the pressure coming out of the blaster.
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.