Posted by Britcheflee on December 30, 2012 at 09:04:40 from (67.187.170.181):
Well, I eventually got a Craftsman impact wrench - has 1/2 inch head, 19.2 volts and is cordless also claims to have 200 ft lbs torque - got it home and it is a heavy and solid device - gave it a 30 min charge and headed up to work on the Sienna - wow! I was extremely suprised at how powerful it was and it made short work of the nuts including the 30mm wheel nut which is supposed to be torqued at over 200 ft lbs - the rest of the nuts gave up a good fight but after a few moments came loose.
I compared it with a dewalt at home depot which had the same 200ft lbs torque but that was $160 and did not come with a battery or a charger! This one comes complete with charger and battery.
Now I wish I had bought an impact driver years ago - sure makes working on those tough nuts a lot easier!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.