Hello Brian, There are two options available which will give you remote hydraulic operation. First and NOT yours is where an auxillary pump is fitted. This type usually has supply and return hoses coming from the LH side cover to the seperate hyd block. This is similar to the ones you mention in your post where you can operate internal and external at the same time. On yours you have a valve block, the right lever of which selects oil flow to the remotes or internal cylinder for the 3pt linkage. Depending on the condition of the components, selecting 'external' will give you a degree of being able to hold the 3 pt up but it is NOT a recommended function and is only as good as the system. The correct quadrant lever position for 'external' is draft (outer)lever 'up' and inner lever in Constant pumping. This as it suggests ensures that the pump is maintened in the fully pumping position. DavidP, South Wales
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.