Massey Harris & Massey Ferguson Tractors Discussion Board |
Re: Massey Harris No. 6 Mower help
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken on September 08, 2003 at 11:17:00 from (216.46.131.69):
In Reply to: Massey Harris No. 6 Mower help posted by Jim C. on September 07, 2003 at 23:01:26:
The seals can be bought at virtually any automotive or farm machinery outlet. Just make sure that when you remove the seals you don't throw them out. You will need the manufacturer's part no which is stamped into the seal casing. if you store doesn't have that part number, they can cross reference it to another seal manufacturer. As far as gaskets, the only one you should need would be the big one that goes behind the cover of the chain case. Either make one or use a gasket eliminator product. To change the seals you will have to remove the chain cover at the back, the chain and the lower sprocket. On the front you will have to remove the pitman arm, the pulley guard, pulley, then remove the whold shaft and check for wear on the shaft were the seals ride. Speedi sleeve this area if worn excesively prior to installing a new seal. Hope this info helps
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|