Posted by Robert Major on February 12, 2013 at 17:35:11 from (216.81.17.23):
In Reply to: Massey Fergerson 1085 posted by Len Calneggia on February 11, 2013 at 00:40:21:
Hi I Had an 1135 with the same shifters as this and that used to jump out or try and put 2 gears together or not return to neutral the odd time. it could be that the pin holes in the linkages are worn and the lever hits the stop before it's properly in gear. I had to mess with the adjustments on the linkages until I hit the sweet spot, it really needed the linkages re built but I didn't have the time to do it and it got sold on shortly after. It only takes a few thou of an " wear to give a problem over the distance of the linkages. If that is your problem I've seen guys file the slot so the lever moves further to as a temporary fix . Regards Robert
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
