Posted by edj856 on September 09, 2012 at 14:12:59 from (174.57.65.82):
I have both a MF 65 and a MF150. I bought the 65 as a project to fix and resell. It came with a 2 spool remote valve MF #677219 installed, but the 3 point hitch didn"t work due to a bad pump. When I replaced the pump, I removed the remote valve and installed the bypass cover from the 150. The hitch on the 65 now works. I then installed the valve on the 150 and the 3 point hitch no longer works and there is no flow through the remote valve to an external cylinder. I had the draft control in the up position and the position control lever in the constant pumping quadrant. What does the knob on the left side of the valve do? I had the knob on the back on the valve screwed in because I"m using a double acting cylinder. Before I take this valve off and tear it all apart, is there something else I need to do to make everything work?
To see a picture of the valve, you can to agcopartsbook.com , type 100 into the search box and MF for the manufacturer. The first book that comes up will be 100/200/1000 Accessories. Scroll a little on the left until you find Auxiliary Hydraulic Valve (677219)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.