Posted by farmallhal on January 09, 2014 at 11:14:02 from (76.2.170.178):
In Reply to: Re: good ole' baler? posted by 1130Leo on January 09, 2014 at 07:46:12:
If I recall correctly the NH 276 was their first high capacity square baler and is known for pumping them out. The follow-on high capacity NH baler is the 320 which was a disaster per a New Holland tech rep I talked too. He stated that the 320 was of a design that turned a later lightened basic frame then the 276 into their high production square baler. The high stroke count on the light weight frame just destroyed them. I've seen a couple 320's at farm auctions and both appeared to be a training ground for beginning farmer welding classes from the amount of welds to the frame and bale chamber. A neighbor had one when the 320's first came out and it worked fine for the first 2 or 3 years before it started to self destruct. I don't know where the NH 316 fits into the series but I saw one for sale and to me with my NH 273 and later NH 311 it looked like a battleship compared to a destroyer escort but it might be a very durable baler also but don't know anyone with a 316 or even one in the neighborhood so can't comment on them, Hal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.