Posted by Paul on December 29, 2013 at 20:37:29 from (66.44.132.180):
In Reply to: Re: 605 g baler posted by steven in tn on December 29, 2013 at 16:23:50:
Agree with JMS. New sprockets.
Those are the funny clamp on hubs, you take the three bolts out, and you screw 2 of them back into the threaded holes on the sprockets. This drives the tapered hub apart, and everything pulls off real easy.
If you don't realize this and try to force them off, pull thrm off, or heat them off, you might end up with that washer end mess the guy has on the bottom front one there. I would not be comfortable with whatever is going on there.
Sadly those tapper hubs are spendy, but I suspect that one is in bad shape and he cobbled together that 'repair' with the center bolt added and all the washers....
That short chain is too loose, you will need new chain and new sprockets. And whatever is going on with that one hub....
Those bearings like to go out, be sure behind everything the bearings are in good shape, could be part of the problem too.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.