Posted by DoubleR on September 04, 2013 at 18:47:49 from (198.105.230.161):
In Reply to: mixer-grinder posted by ben70b on September 04, 2013 at 16:11:49:
I run a John Deere 400 with thirty hp with no real problem. You got to baby it a little with ear corn and a fine screen. I will then hook my 40 hp. tractor if its not tied up elsewhere. As the machine is getting old I baby it and don't get in any big hurry. Since I shovel my eared corn in, the older I get, it has no problem keeping up with me. I like you, was concerned when I got the grinder years ago, especially when the book showed it hooked to a 4020 JD. I see allot of usable machines go for around 1500 bucks. Ones that a big operator wouldn't want to mess with but would work OK for a small guy just feeding a few head. I paid 1500 for mine about 15 years ago. I take good care of it and keep it inside and I've had no problem with it. I finish about 10 steers a year that I grind feed for about once a week. There is a big Dairy guy down the road that has a almost new New Holland grinder mixer that he runs with about a 50 hp tractor. He has a bunch of big tractors sitting around he could use on it. So the 50 hp must do fine with it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.