Parts catalog shows different parts numbers for subframe used on I-504 (utility) and the one used on I-460. The rear axle mounting is identical but there is a different length involved in the subframe itself. Subframe for a 504 U also fits 340 U. Subframe for 460 U is same as I-606. I-606 and I-504 are basically the same tractor, it is just the 606 has six cylinder engine making it "2 cylinders" longer through the engine therefore longer total length. . Front brackets are identical for use on both models. Only difference in the front mounting is which set of holes is used to bolt it to tractor. If you buy it, the subframe could be lengthened by cutting the square tubing near the rear end and welding in the needed additional inches of a piece of identical square tubing. Forget about putting one from a 504 utility on the 460 Farmall. The rear mount is very different, the subframe is longer and the front mounts are also very different . I can send you pictures from manual and parts book if you need them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.