Posted by Bret4207 on May 01, 2013 at 04:39:18 from (64.19.90.196):
In Reply to: sickle mower posted by jamie majors on April 29, 2013 at 20:05:15:
Then look around for a 27V IHC sickle bar mower. There were zillions made. I never saw one that I thought worked worth a hoot, but the old timers tell me they worked good behind a Farmall.
By plates I assume you mean ledger plates and by guide bars I think you mean wear plates? The biggest problem I've had with sickle bars is getting the cut right and taking up the wear up in the bar to frame area. I've had to machine new pins when I couldn't take up the wear to adjust the lead right. A lagging bar simply won't cut well and a bar with excessive space in the knife/ledger pate interface rips the hay rather than cuts it. The Amish around me really work at this stuff since they're depending on sickle bars and not haybines or discbines. It's a feakin' science to get one as close to perfect as possible. They use stub guards close to the head and some have a 2nd mower with all stubs for 2nd cut.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.