Posted by Leroy on April 11, 2013 at 08:06:43 from (69.88.205.38):
In Reply to: 290 planter posted by Glen Stevens on April 10, 2013 at 07:03:58:
Just pulled a book out. As you have found out there are 3 trannsmission settings marked 2-3-4 that I do not understand their reasoning for marking them like that, then there are 3 different sprocket sizes, a 7 tooth, 13 tooth and 15 tooth, So I do not have to type as much these figures will be in this order, first is cell count, second is shift lever the 7 tooth, 13 tooth and 15 tooth.
16 - 2 - 27.3" - 14.2" - 12.7"
16 - 3 - 18.2" - 9.8" - 8.5"
16 - 4 - 13.6" - 7.3" - 6.3"
24 - 2 - 18.0" - 9.8" - 8.5"
24 - 3 - 12.1" - 6.5" - 5.6"
24 - 4 - 9.0" - 4.9" - 4.2"
These figures are based on a 28" diameter tire or steel wheel and the 6:00 X 16" or the 6"70 X 15" are as close as you can come to that size, modern sizes I don't have a chart before me but they would probably be too wide the chain would rub on the tire.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Farmall 460: That's My Girl - by LeAnn R. Ralph. How many sounds can you think of that are as familiar to you as your own breathing? What about the hum of your refrigerator? Or the thump of your clothes dryer? Maybe the engine of your car? You hear those sounds every day, and you don't think much about them, do you. I can think of a few common, ordinary sounds in my daily life, too.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.