the trail guide wheel is very important in making a disc plow work, or pull straight.
the disc blades push the plow to the left, the trail guide wheel must be angled enough to push back and keep the plow running straight.
most old disc plows were put in the fence row when the rear trail wheel disc blade (straight blade like a plow coulter blade worn down and could no longer bite in enough to keep the plow running straight.
my friend and I have two ferguson disc plows, picture attached is the other disc plow, both work great: I had to replace the rear trail guide blade on both of them first thing.
I bought a flat plow coulter blade 18" I think, laid the old blade over the new one and used my torch, blew the mount holes into the new blade, worked like a charm.
again: you must be able to adjust the rear guide wheel and it must have enough bite to it, to keep the plow going straight.
otherwise, a disc plow will not work.
on the plow disc blades themselves, you can take your 4 1/2" disc grinder and sharpen the edges of the main plow blades, if necessary.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - It Can't Be Done! - A Tractor Story - by Neil Campbell. I'll never forget the time back when I was a boy baling hay on our Farm in Big Rapid, Michigan. The most memorable event that took place was a trip up the steepest incline on the farm pulling an old New-Idea baler with a pony-motor for power and a haywagon. I had just talked my Dad into buying an old John Deere B with 6-speeds ahead and I was real proud of it, except it was a little smaller than the Case tractor that we normally
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.