Posted by ihman73 on January 31, 2013 at 15:33:20 from (38.104.162.142):
In Reply to: New Holland Bale Wagon posted by Super Steve on January 31, 2013 at 09:59:14:
I have a 1003 and have had pretty good luck with it. You can pick up hay in hills if you have enough tractor in front and don't drive like a maniac. It works better to have the loader on the uphill side and pickup going uphill on really steep slopes. A 1034 will have its own hydraulic system so checking the oil to see what it looks like and checking the bale loader chain and 1st table chain as those are likely pricey from NH. Look it over for cracks in the frame and checking pivot points for wear, also make sure the push off feet and arms work freely and aren't bound or bent up. A book is mandatory and there is a learning curve as they aren't as straightforward to learn as other implements. If you don't make solid consistent length bales that will need to be your first step. If you are used to just stuffing it in as fast as you can go any time you save baling you will pay back threefold when you are out there picking them up. They are a great time saver if you make solid even bales and take the time to learn how to use it otherwise it will make for a miserable afternoon for you. roderimp.com is a website for Roder implement in Kansas they deal mainly in bale wagons and have great information on bale wagons.[/url]
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.