Posted by haley on January 22, 2013 at 04:33:50 from (69.160.178.202):
In Reply to: Tin's new hay tools posted by Erik Ks farmer on January 21, 2013 at 13:21:39:
Hey Erik,Let me tell you a story on a 468 J.D. baler.I really am not a J.D. fan but when something impresses me I will surely be the first one to say so.Back in about 06 I was combining rye for a customer and I got a friend with a newer Vemeer round baler to bale some of the straw for me and it turned into a nitemare.This was the big bale version with the gathering wheels on the front and it wouldn't even feed in one windrow from my combine without having to go super slow and at times even stopped up in the front to the point the slip clutch would slip.All this was happening in straw off of 15bpa rye that wasn't very thick at all.Two days later I started cutting some real good wheat(60-70bpa)with a TON of straw from cutting it real low and this customer had a guy with a 468 J.D. baler come in to bale it.I was just dropping it out the back of the combine in a windrow just like i did in rye and there was at least twice as much straw as the rye and probably closer to three times as much.Heres where it gets good--When the bailing crew pulled in the field they had the baler but they also brought a 8 wheel v rake.They started with the rake raking two of my windrows together and I was thinking from the combine cab "you idiots,you will never be able to bale that!" but boy was I wrong. That J.D. baler eat the huge windrow like there was no tomorrow! The windrow was so high up on a 4440J.D. tractor that the front axle was pushing it at times and he was baling just as fast as he could hold it on the row and making some beautiful bales to boot.I don't fool with hay but if I did you can bet this is the baler I would have in my camp.I think you will be VERY pleased with it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.