Posted by Weldon K on October 20, 2012 at 07:36:32 from (71.31.207.105):
In Reply to: JD 6F chopper posted by Bret4207 on October 18, 2012 at 14:50:54:
JD #6 model forage harvesters are flywheel type cutterhead machines. Old design machines that became obsolete with advent of cylinder type cutterheads that had built in knife sharpening capability. Big silage blower type wheel with 6 knives bolted to the side of the wheel and, I think, 3 blower paddles on the outside circumference. Knives must be removed from their mounts to sharpen them . Large V-Belt on pulleys drives cutterhead. The things blew chopped material well. One in operating condition will still get the job done for a small operator's needs. I still have one with sickle bar head on it setting in a shed. Have operator manual that I could get specs. for you if needed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.