Posted by cydectin on September 21, 2012 at 10:01:26 from (72.161.154.68):
Local salvage yard has a White 6342 rollover plow sitting in their yard. It is currently set up as a 4-18 but has the equipment to set it up as a 5-18. Coulters all turn but are a little stiff, turn cylinder has some rust and I did not look to see if it is pitted. Paint on a scale of 1-10 would be a 6 or 7. Moldboards have no wear grooves on them that I could see, shares look good and look like they would suck the plow in the ground, shins look good and so do the landslides. Plow has the trash covering boards. This is not my plow. Only reason I am telling you about it is that it is to good of a plow to sit around. Overall condition I would guess to be a 8 or 9. Salvage yard wants $2250 firm. Shoot me a reply if interested and I will get you in contact with the Salvage Yard. Located in northeast Missouri.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.