Posted by buickanddeere on January 01, 2012 at 10:05:53 from (209.240.116.222):
In Reply to: 3 PT Chipper? posted by Dave H (MI) on January 01, 2012 at 08:47:50:
As previously mentioned. Why not just pile the brush on the edge of the property. It makes good habitat for bunny rabbits. If using a chipper. ALWAYS stand on the side of the feed chute NOT in front of the feed chute. WHY, because people get hit with flying debris when standing in the line of fire. Occasionally these deep thinkers get sucked/fall into the feed chute too because they were standing in front.
China Best Products 6" and 8" PTO driven Wood Chipper
PTO and self-powered log splitter
JM6 6" models Click to see installed on a tractor.
JM6 6" wood chipper $1550 order separately, ship to basic port/major cities
JM8 8" wood chipper $1750, 121x106x108 cm /1.385CBM or 48.4 x 42.4 x 43.2 inch GW 500 kgs/1100lbs NW 400kgs/880 lbs
For a limited time, you get a set of spare blades and belts for free($180 value) for JM6, ship from China only.
List of locations for pickup
spare blades JM6 $120 JM8 $160
spare belt JM6 $60 JM8 $80
spare drive shaft for JM8 $120
spare feed roll for JM8 $160
To door delivery in the states, from $500 for continental states.
JM6 6" Wood chipper packing in iron crate when shipping:
Dimension : 121 x 106 x 108cm or 48.4 x 42.4 x 43.2 inch
Gross weight: 375 kg/825 lbs Net weight: 305 kg/671 lbs.
JM8 8" Wood chipper packing in iron crate when shipping:
Dimension : 121 x 106 x 108cm or 48.4 x 42.4 x 43.2 inch
Gross weight: 375 kg/825 lbs Net weight: 305 kg/671 lbs.
One year parts warranty from the manufacturer, for defective parts only, not for worn out, not for the blades, belts, drive shaft, feed roll.
We clear customs for USA and Canada, $250 for customs.
Check our FAQ for how to place order.
Thanks Steven Bradshaw for the nice photo.
JM6 Features: 780 lb. chipper include 6" cutting capacity, heavy 24" 175 lb. flywheel with two 10" cutting blades and anvil, a 24", square feed chute that is positioned horizontally at hip level for easy feeding, a chip blower that makes it easy to blow chips into a wheelbarrow or truck/trailer, and a belt driven feed roller that pulls material right into the cutting blades. This chipper runs on a standard CAT-1 540 PTO output and a PTO shaft is included. The flywheel assembly is driven by a set of five belts from the PTO shaft, and the feed roller is driven by a single belt. Replacement belts are available at any NAPA store. The discharge chute inner size is 107x98mm, you can't dismantle the chute, but you can adjust the height of the discharge chute.
Model JM6 JM8 Diameter of flywheel 24" Speed of flywheel (r/m) 1220 Max. chipping diameter 6" 8" PTO 540rpm 3 point hitch CAT-1 Tractor power 15-50hp
1. What is the knife material and total size L x W x H? Material: Cr12MOV Size: fix blade 240X60X8mm Movement blade 254x58x8mm
2. Feed rates and roller diameter V=17.35m/min D=140mm
3 Disc size - diameter and thickness
D=605mm B=85mm
4. Can we order the chipper in green?. Yes, you can choose the color, it takes longer time.
5. Infeed throat opening size (not shute size)
240x205mm
6. Disc shaft size and bearing size and type. ф134x465mm Type UCP209
7. What size is the chip blower? CFM 110X100mm
Usually we have JM6 in stock, ship out in 3 to 5 days, confirm with us when you order.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
