Posted by KEH on January 16, 2009 at 06:18:33 from (206.74.30.184):
In Reply to: Re: disc mower posted by Tx Jim on January 16, 2009 at 04:37:18:
Tx Jim,
NH 616 and 617 in 3ph mowers to the best of my recollection. Don't know about the disc MOCOs.
Neighbor has a 617 and likes it. He says to check the oil in the cutterheads he first uses a carpenters level to see that the cutterbar is level.
Saw a cutaway demo of the cutterhead at a farm show. The shaft is made up of a series of short shafts that telescope into each other and drive bevel gears on the cutterhead. In case of damage, hopefully there will be just one cutterhead and short shaft to repair/replace.
The NH is heavier than some other models. See Hay DRs figures on weight in the post below.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.