Your mower was built with 3/8" thick blades, but they could have been replaced with 1/2" thick blades at some point, so the first thing you need to do is measure your blades because the hardware is different for each. Here are your part numbers:
For 3/8" Blades: GY2250W Blade Bolt $36.82 each 11M7040 Cotter Pin $.47 each 12H234 Washer $1.03 each 14H920 Nut $2.47 Each
For 1/2" Blades: W12064 Blade Bolt $38.37 each W10327 Lock Nut $13.38 each
The above prices are current John Deere list, and you will need two of each for each blade.
Another tidbit of info: These mowers don"t have actual serial numbers. The 003 is actually a "series" number. All the mowers in that series will have 003 on their tags. The other series is 004. The 003"s were built with 3/8" blades and the 004"s were built with 1/2" blades. I was a John Deere parts manager for 18 years, so I have been through this a few times. If you want to send me your e-mail address, I will send you a PDF of the parts catalog for your mower. That should help you with your dealer when you need parts. Many of the part numbers have been subbed to new numbers, but they should be able to tell you that when they check price and availability. The above numbers I gave you are the latest subs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.