Posted by DeltaRed on October 27, 2012 at 19:16:56 from (67.6.219.50):
Remember the mangled 95 feeder house,chain,shaft,etc?Well,I made a new shaft for the front drum,had the main drive/pivot shaft along with some other parts straightened.Best thing of all,that new 105 (old style)conveyor chain is now a 95 (new style) conveyor chain.I was able to cut it down.I ground the rivets down,made a drilling 'jig' to properly place the new holes each and every time.Rebolted everything back useing 5/16 finethread bolts,then tack welded the nuts.Finished up by cutting 5" from each end of each slat.Perfect match.I just saved myself about $700 in about 8 hrs.That feederhouse will be combining soon!Feels pretty good when a plan acctually works! :) Steve
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.