Posted by jheitkemper on October 15, 2009 at 20:11:46 from (98.115.39.92):
In Reply to: MF 300 Combine posted by wicomico160 on October 15, 2009 at 13:55:18:
Congrats on the300 ,, been running one since 1986 ,Without the governor hooked up, Mine will go at least 15 mph ,,. I do watch the revs on that motor .. Slant 6 is a tuff engine , If I were you ,Put the head on a trailer if its a 33 or a 13 ft grain table , or else weight the heck out of the rear axle , If this machine has seen no action for serveral monthes or YEARS ?..check the drive belt and be prepared to adjust along the way ,,15/16s wrench , ( I ruined a decent traction belt on a gleanor F we resurrected last week ,, on the treacherous hill climb coming out of its happy hollow it surged itself to bits )... If you have down hillcurves , gravel rds with cliffs over the side like I did when I 1st got the 300 , you will take your time , One tap of the brake and you could turn 90 degrees instantly with a 13 ft head hanging on the front ,, Guess How I know???!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.