Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage
Auction 

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Garden Tractors Discussion Board

Re: No Brakes


[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]

Posted by MNGB on June 28, 2013 at 20:35:49 from (67.230.225.74):

In Reply to: No Brakes posted by Keith A. on June 28, 2013 at 12:40:13:

Hi Keith this maybe helpfull

First does your tractor have a brake band, or does it have the disk

brake system.

Once we know that we can help you out farther. If it has a brake band,

is the brake lining still there or is it still good.

If it has a brake band, here is how I adjust mine. First I will go

through the adjustment for the brake, then the parking brake, then

the clutch.

Brake adjustment

1. first I push the brake pedal as far down as it will go, then tie

it there with a rope to the front axle so it holds it down while

making the adjustments.

2. Then with the tractor in neutral, try pushing the tractor, is it

moves then the brake needs adjusting.

3. under the tractor, in the middle of the break rod, there should be

what looks like a turnbuckle adjustment. it has a right hand tread

and a left hand tread, there should be a locking nut on one side or

the other, loosen it.

4. Now turn the adjustment so it makes the brake rod shorter, that

will put more pull on the brake ban, just turn it one turn at a time.

5. Now check to see if you can push the tractor, if you can't then

the adjustment was enough, tighten the lock nut back up, if the

tractor moved while pushing it then repeat step 4, until the tractor

cannot be pushed.

Parking brake adjustment



1. first I push the brake pedal as far down as it will go,then set

the parking brake lever.

2. Then with the tractor in neutral, try pushing the tractor, if it

moves then the brake needs adjusting.

3. Under the tractor, right by where the parking brake handle is

located there should be 2 nuts the are locked together, loosen them.

With the brake lever in the park position, tighten the nuts against

the brake mechanism so that they put added pull on the brake ban.

4. once again try pushing the tractor, if it moves those nuts need to

be adjusted again. If not then lock the 2 nuts together.

Clutch adjustment

1. first I push the brake pedal as far down as it will go, then tie

it there with a rope to the front axle so it holds it down while

making the adjustments.

2. With the tractor in NEUTRAL start the engine and see if the drive

belt is staying still or moving with the drive pulley on the engine,

it should be staying still at this point.

3. If the belt is staying still then there is no need for adjustment,

unless the belt is slipping while you are in gear and driving.

4. If the belt is moving with the drive pulley then adjustments need

to be made.

5. There are a couple of adjustments that can be done.

6. On the drive side of the tractor, right below the Dash, there

should be a slot, it has and idler pulley on the inside of the

tractor there.

7. with the brake/clutch pedal tied down at this point, you must

adjust that idler pulley so it makes the belt looser. then re-tighten

the idler.

8. with the tractor in NUETRAL restart the engine, see if the belt

still moves while the engine is running, if not it should be OK, if

it still still running repeat step 7

9. one of the most important part of the clutch system which gets

over looked is the belt guides on the drive pulley on the engine,

they have to be set so when the brake/clutch pedal is all the way

down, the the belt pushes against the guide on top of the drive

pulley. that guide has to be set so that the guide pushes the drive

belt out of the bottom of the drive pulley.

10. most important is that people forget that the engine is pulling

the belt from the bottom of the pulley, and the belt is running off

from the top of the pulley to the clutch pulley, which then put pull

on the belt to tighten it up to drive the trannys.

11. basically clutching and braking is just the opposite of the

engine driving the trans.

If you do all these adjustments, your tractor should work OK


Replies:




Add a Reply

:
:
: :

:

:

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


 
Advanced Posting Tools
  Upload Photo  Select Gallery Photo  Attach Serial # List 
Return to Post 

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate ... [Read Article]

Latest Ad: Super WD9. [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy