Posted by Eben51 on December 09, 2013 at 06:27:55 from (71.87.69.7):
I am needing to replace the drive coupling for the Simms pump. The pump drive flange is no longer available from CNH and only available aftermarket. I recently purchased the entire part assembly via Ebay and found that the keyways are cut too small. A further web search seems to suggest that this particular part is made by only one facility, but sold by many vendors [they seem to all use the same photo of the part]. Have any of you successfully replaced these parts and where did you obtain them? Or, have any of you encountered the same problem, and how did you solve it? Please note that I am not referring to the fiber disc, which is still available from CNH, but to the steel flanges on both the pump and drive shaft. I have the capabality to recut the keyways, but would prefer not to go that route. I can return the parts, but that leaves me nowhere at this point. Thanks for any ideas!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.