Posted by Pete Carrera on March 09, 2013 at 08:06:05 from (70.114.4.96):
Hello, i found a discussion thread on hydraulic fittings for a Ford 713 backhoe dated 2004. Would anyone be of assistance on request for information to find a standard or sae fitting to fabricate hydraulic hoses for obsolete fittings. The post i found was by a Scott in pa
08-07-2004 18:03:29 24.159.2.105
Report to Moderator
Re: ford major backhoe in reply to derek, 06-23-2004 21:30:15 derek, who built the backhoe attachment? Ford or sherman are the two i have come across. I own a 61 supermajor with a ford loader and hoe. The factory fard hose fittings are available from ford/new holland but are about $35 each. I had a guy look at mine and he discovered that the valves and cylinders are double seated. They will accept standard sae fittings. I replace every hose except 2 on mine with the standard fittings and haven't had a problem in the 1 1/2yr since. If you want a picture of the new fitting email me and i'll send it to you. good luck
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.