Posted by ejensen on November 07, 2013 at 05:56:11 from (173.128.244.198):
In Reply to: Re: seals posted by Ultradog MN on November 07, 2013 at 04:12:24:
Ultradog, Sounds like a good plan. For your information the Paulson loader I bought fit perfectly on my jube. Had to install a flex coupling on the crankshaft pulley, removed the front end, and built a support for the pump. A lot of things I didn't know such as size of bolt for retaining the front pulley on the crankshaft. 1 1/4 nf. Thought I would put all the parts together needed with part numbers. Might help someone putting a Paulson loader on a ford jubilee. Many people on the forum such as yourself have helped me. Old has been a tremendous resource with this project. Bought the the loader on craigslist without seeing it when I was in Scottsdale Arizona from a tractor repair place in Shelton, Wa. Hauled the loader to the San Juan Islands where my tractor is located.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
