Posted by Phil960 on January 12, 2013 at 16:16:42 from (173.30.173.190):
Got the newly recored radiator put in today. Also recieved the power steering flange assembly back from forddoc to day. Thanks Adam, the parts look and work great. After putting new seals in the control valve and cylinder, I reinstalled everything and fired it up. Ran it around the barnyard for about 45 minutes and the cooling system works as it's intended as does the power steering with no leaks. So, those issues resolved for now. While waiting on parts figured I'd replace the proofmeter and ammeter. Ammeter works fine, but nothing on the proofmeter. When I took the old one out there was no drive cable inside the housing. Red flag right away. But the new one does nothing. Am I correct in thinking that the problem could simply be a broken drive inside the bushing on the hyd pump? Anyone had this before? Does it require pulling the pump or can those parts be accessed from the drive end of the pump? Or, am I completely off base here?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.