Posted by Phil960 on January 06, 2013 at 09:46:55 from (173.30.173.190):
While waiting for the radiator shop to repair the radiator, I went ahead and heated up the drag link and using a gear puller removed the drag link and power steering cylinder. (this method was correctly advised by many of you, thanks again)
What I've found is that the cylinder seal is leaking at the piston end. Not a problem, found a seal kit for it. But at the other end, it's leaking hyd. fluid somehow back through to the ball stud that attaches to the drag link. It appears at some point someone tried prying the drag link off and damaged the retaining cups inside. The whole thing appears really worn.
The cylinder is in good shape, nice and shiny, no rust or pits and I can make the rubber grommets I need. The valve itself appears to be in great condition with no cracks or wear that I can see. It has a Bendix casting mark on it. But from the valve to the drag link it looks like I need parts.
I called New Holland and they state that those parts are not available although he was trying to cross reference numbers that I had given him. I'm going to take my parts book to him and see if he can find something that way. But I recall being told here that parts, other than seals, are obsolete for these cylinders. So, I did find on another site where complete rebuilt cylinders are available...maybe, it depends on their stock. But at 770 bucks including the core charge seems a bit steep. You guys have way more experience with these tractors than I and have been a tremendous help to me so I'm asking What are my options and what would you reccomend. Sorry for the long post but wanted to give as much info as I could.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.